Kotzur Baumaschinen GmbH

Condition: excellent (used), Year of construction: 2019, Containerized boiler system HOVAL MAX-3 Output: 1750 kW Year of manufacture: 2019 Rcedpfx Amezp R Nfjyod Burner: ELCO

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available Redpfezp Rmqjx Amyecd The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: good (used), Year of construction: 1996, functionality: fully functional, power: 550 kW (747.79 HP), overall weight: 6,000 kg, nominal heat output: 550 kW (747.79 HP), heating capacity: 550 kW (747.79 HP), For sale is a complete wood chip combustion system with two Schmid wood chip boilers. Boiler 1, type UTSK-550.22, has a capacity of 550 kW, and Boiler 2, type UTSK-300.22, has a capacity of 300 kW. The system was manufactured in 1996, has been regularly maintained, and is in good, operational condition. The system will be sold including electrical switchgear and accessories, and optionally with 3 buffer tanks, each with a capacity of 8,000 liters. The system does not have an electrostatic precipitator and is being sold because it does not meet Swiss emission standards. It must be dismantled and transported by the buyer; warranty claims are excluded. Rcodozn Rfwopfx Amyed

Condition: used, Year of construction: 2008, overall weight: 1,250 kg, total width: 1,220 mm, total length: 2,700 mm, total height: 2,245 mm, nominal heat output: 600 kW (815.77 HP), No. 10035 2 units stationary warm air heater / generator Kroll 730 S-300 Used, year of construction 2008 According to our customer / the previous owner, the machines are fully functional and can be viewed on site Heat output QN: 600 kW Rated heat input QB: 652 kW Warm air flow rate VN: 48,300 m³/h Rated pressure DN: 300 Pa Motor: 15.0 kW / 28.6 A CE-compliant Transport dimensions each approx. 2700 x 1220 x 2245 mm LWH Weight each approx. 1250 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Rsdpfx Amozlr Uuoyecd Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 66422, pressure: 3.5 bar, 3 buffer tanks with a storage capacity of 2200 liters each, also available for individual sale. Redpfozllc Sox Amyocd

Condition: excellent (used), Year of construction: 1999, Biomass boiler from the renowned company URBAS TYPE UR-FRR-4500 Biomass boiler with a heating output of 4500 kW Rcodozlgptopfx Amysd For biomass, bark, wood chips, and sawdust. Complete pump and valve system Location: Austria Operation until the end of the 2026/2027 heating season

Condition: new, Year of construction: 2023, functionality: fully functional, power: 37 kW (50.31 HP), overall weight: 380 kg, total width: 1,160 mm, total length: 1,535 mm, total height: 1,300 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 6.41 m³/h, cooling capacity: 37.2 kW (50.58 HP), Equipment: cooling unit, Remko KWL 370 inox chilled water unit, new/unused in original packaging Stainless steel design Nominal cooling capacity 37.2 kW Refrigerant R407c (10.51 kg) Maximum power consumption 42.03 A Sound pressure level at 10 m 51.3 dB(A) Rcjdpszh Dgusfx Amyod Dimensions 1300x1160x1535 mm (H x W x D) Weight 380 kg

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Burner type: WM-G10/3-A Rcsdezdku Repfx Amyjd Design: ZM-LN Year of manufacture: 2011 Output: 125-900 kW

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 4,700 kg, total width: 2,400 mm, total length: 6,100 mm, total height: 2,550 mm, type of input current: three-phase, input voltage: 400 V, warranty duration: 6 months, tank capacity: 800 l, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, hot water, type plate available, We offer a fully equipped, modular pellet boiler house with a 40 kW capacity, built in an ISO sea container and ready for immediate operation. The boiler house has been used as an exhibition sample and for demonstration purposes, and is therefore in very good technical and visual condition. The module is suitable for heating residential buildings, offices, workshops, warehouses, construction sites, agricultural facilities, and other buildings. It can be used as a permanent or temporary heating solution, as well as a backup boiler house for emergency situations. Included: * DEFRO pellet heating boiler with automatic pellet feeding * Nominal power: 40 kW * DEFRO storage tank – 800 l * Kospel hot water boiler – 140 l * Expansion tank * Circulation pumps * Automation and control system * Electrical distribution panel * Flue gas exhaust system * Natural ventilation * Gas extinguishing system for added safety Technical data: * Container dimensions: 6100 × 2400 × 2550 mm * Total weight: approximately 4700 kg * Power supply: 3N+PE 230/400 V * Frequency: 50 Hz * Power consumption: approximately 5 kW * CE compliance * TÜV NORD conformity assessment Rcedszdc Tgjpfx Amyjd The current system configuration allows for increasing the heating capacity in the future, as the installed components are suitable for operation with a higher-capacity boiler. The boiler house is easily transportable and can be quickly installed on-site. Only the connections need to be prepared, and the system is ready to operate. The boiler house is equipped with an automatic gas fire extinguishing system, which provides additional protection for electrical and technological equipment. The system is in working order and ready for use. Upon agreement, it can be dismantled before sale, which would reduce the price accordingly. Available for inspection in Riga by prior arrangement.

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 3,500 kg, Equipment: hot water, For sale: a furnace, a biomass boiler, designed for wood chips. It is in excellent working condition. Rcodpfx Ajzc R Uvsmyod

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 150 kg, Equipment: type plate available, Weishaupt WM-GL 10/3-A ZM-T, power output 110-1000 kW. 3 units available. Year of manufacture: 2010 Burner power regulation: gas – modulated oil – 3-stage Gas path of the burner: maximum supply pressure 500 mbar (gas paths for other supply pressures available upon request) The burner is equipped with a DMV 525 gas valve, an FRS 520 stabilizer, and a 520/1 filter. Flame tube extended by 100 mm (we also have WM-GL 10/3 burners without extension). Fuel type: natural gas, LPG, light fuel oil. Burner power output in the range of 110-1000 kW. Rcodpfxszcg Hzj Amysd Burner control unit: WFM 54 + AGM module Electric motor 1.5 kW / 380V. CE certificate + complete burner documentation (manual + burner electrical diagram). QRA 2 photocell. The burner is in good working order and complete, having undergone a comprehensive inspection. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee 100% functionality of the burners we sell. We also have other burners and spare parts for all Weishaupt burner models available for sale.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, overall weight: 250 kg, input voltage: 380 V, Weishaupt WM-L30/1 R oil burner, power 800-3100 kW, manufactured in 2016. Burner power control: power continuously adjustable. Fuel type: fuel oil. Burner power range: 800-3100 kW. Rcjdpezcg D Tjfx Amyed WFM 100 controller with power regulator (LMV 51.100C2). 7.5 kW/380V electric motor. CE certificate + complete burner documentation (operating manual and burner wiring diagram). QRB 1 photocell. Burner is 100% complete and has been serviced. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee the proper functioning of the burners we sell. We also have other burners and spare parts (new and used) for sale. Information available upon request.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1199, overall weight: 800 kg, volume flow: 5,000 m³/h, Equipment: documentation/manual, type plate available, We are offering this used WOLF CKL-A-5800 re supply and exhaust air unit, with a Mitsubishi air conditioning unit, including all existing pipelines, manufactured in 2019. Rodpszb Itgefx Amyocd Manufacturer: WOLF Model: CKL-A-5800 re Year of manufacture: 2019 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2013, WESHAUPT gas burner, with gas line DUNGS DN65 Rcodpfxszbz Ide Amyjd Type: WM - G20/3-A Year of manufacture: 2013 Output: 350-2600 kW

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, INDUSTRIAL ELECTRIC HEAT TREATMENT FURNACE - EMISON Electric heat treatment chamber furnace manufactured by EMISON (Forns Elèctrics Emison SA, Badalona, Spain), a Spanish specialist in industrial furnaces. From an industrial company liquidation (insolvency proceedings). ═════ SPECIFICATIONS ═════ - Manufacturer: EMISON (Forns Elèctrics Emison) - Country of origin: Spain (Badalona) - Type: Electric heat treatment chamber furnace - Power supply: 380V three-phase - Heating: electric resistance elements - Temperature control: analog - Large heating chamber - Robust metal frame construction - Model: [TO BE CONFIRMED FROM NAMEPLATE] - Max temperature: [TO BE CONFIRMED] - Total power: [TO BE CONFIRMED] - Chamber dimensions: [TO BE CONFIRMED] ═════ CONDITION ═════ - Used, from an industrial closure (not due to malfunction) - Frame in good condition - Sold as-is, a full inspection is welcome before pickup - Original manual NOT included - No warranty implied ═════ ABOUT THE MANUFACTURER ═════ EMISON (Forns Elèctrics Emison SA) is a Spanish industrial furnace manufacturer based in Badalona, Barcelona, and is still active today. The manufacturer provides technical support and spare parts directly for existing units. This makes EMISON furnaces a safer choice than those from defunct brands. ═════ APPLICATIONS ═════ Suitable for: - Heat treatment of metal parts (annealing, tempering, hardening preheat) - Industrial drying processes - Ceramic firing (low-medium temperature) - Curing of coatings and paints - Laboratory and R&D thermal processes - General industrial heating Rsdpfx Ajzbg Rqsmyjcd ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain (or Barcelona) - Weight: [TO BE CONFIRMED - approx. 600-1,000 kg] - Loading: forklift required - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport Keywords: EMISON furnace, heat treatment furnace, electric industrial oven, chamber furnace, Spanish furnace, annealing oven, drying oven, tempering furnace, industrial heating equipment. For technical questions, additional photos, or to schedule an inspection, please send a message.

Condition: excellent (used), Year of construction: 2016, For sale: a functioning and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a DUNGS DN65 gas manifold. 1. Rjdpozamgcsfx Amyecd WEISHAUPT WM - G30 (3800 kW); two units available. - Output: 400 - 3800 kW - Design: ZM-LN - Year of manufacture: 2016

Condition: like new (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). 1. Burner type: WM-G30 Output: 600-5700 kW Design: ZM Year of manufacture: 2013 Rsdezamd Uepfx Amyscd Connection pressure: 15-500 mbar

Condition: excellent (used), Weishaupt RGL50 / 4900 kW / Oil & Gas / Dual-fuel burner Rjdpjzal Ncofx Amyjcd

Condition: like new (used), Year of construction: 2015, For sale is a functional and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a gas manifold DUNGS DN65. Rcsdozab H Depfx Amysd WEISHAUPT WM - G20 (2600 kW) - Output: 350 - 2600 kW - Design: ZM - Year of manufacture: 2015

Condition: excellent (used), Year of construction: 2006, For sale are functional and very well-maintained dual-fuel burners from the Weishaupt brand, model GL3-630 kW, complete with a gas line DUNGS DN 40. Rsdpfxszaby Re Amyjcd Weishaupt: GL3 - (630 kW) Burner type: GL3/1-E Design: Dual-fuel Output: 90 - 630 kW 16 - 53 kg/h Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2005, For sale: a functioning and very well-maintained dual-fuel burner (oil/gas) of the Weishaupt RGL50 brand – 5400 kW, including gas valve. Year of manufacture: 2005. RGL50 Rodezabnnepfx Amyecd Output: 600 - 5400 kW 95 - 453 kg/h Design: ZM Year of manufacture: 2005

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Rcedpfxozaa Uas Amyod Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: excellent (used), Year of construction: 2002, Weishaupt gas burner G7/1-D, with gas line Dungs DN 50 Design: ZMD-LN Rsdoy Uvt Nspfx Amyocd Output: 250-1550 kW Connection pressure: 15-500 mbar Year of manufacture: 2002

Condition: excellent (used), Year of construction: 2001, Weishaupt gas burner G30/2-A, with gas train Dungs DN 65 Rsdpfx Amsy Uvkzjyscd Version: ZM Power: 300-2150 kW Supply pressure: 15-500 mbar Year of manufacture: 2001

Condition: excellent (used), Year of construction: 2007, For sale is a functional and very well-maintained oil burner from the brand Weishaupt, model WM-GL10 – it only ran on oil, therefore it does not have a gas line. 1. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 2. For sale is a functional and very well-maintained oil burner from the brand Weishaupt, model RL3-A. Rodpfx Amey Uvhtjyocd Burner type: RL3-A Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Year of manufacture: 2002