D'Cunha Industriemaschinen GmbH

Condition: excellent (used), Year of construction: 2001, EMCO Turn 332 MC Excellent condition (The left sheet metal has been replaced – this is not a 345 II) Year of manufacture: 2001 Gjlhccqewzcdhsrjiw Extensive accessories: Cabinet including accessories – driven tools, etc. (see images) Driven tools Tailstock Parts catcher Turning diameter: 220 mm Turning length: 480 mm Control: Sinumerik 810 D Siemens Swing diameter over cross slide: max. 290 mm Max. workpiece weight: approx. 25 kg Distance between spindles: 720 mm Main spindle: Max. speed: 6,300 rpm Spindle diameter at front bearing: 70 mm Spindle bore: 32.5 mm Bar capacity: max. 32 mm Max. chuck diameter: 220 mm C-axis: 0.01° Travel: X: 160 / Z: 510 mm Turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tool stations: max. 6,000 rpm Tool holder: VDI 25 DIN 69880

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Golswzbq Tshccqrjiw Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II 5 Axis CNC Machining Centre. Serial No. 193582 (2007) Mazatrol Matrix Control, Filtermist FX4002 (2024), Swarf Conveyor Location: These lots are located in Birmingham and Wolverhampton, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gelhcjwy U Amocqrsiw

Condition: used, Year of construction: 2011, Mazak Quick Turn Smart 200 2 Axis Lathe. Serial No. 216297, (2011) with Filtermist FX4002 (2024), Swarf Conveyor Gijlhccqswy Uxhsrjw Location: These lots are located in Birmingham and Wolverhampton, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2011, Mazak Quick Turn Smart 200M 3 Axis Lathe. Serial No. 223306 (2011) with Filtermist FX4002 (2024), Swarf Conveyor Gslhcewy Utlocqroiw Location: These lots are located in Birmingham and Wolverhampton, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2012, turning length: 500 mm, turning diameter: 530 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 550 mm, bar passage: 65 mm, bar diameter: 65 mm, controller manufacturer: MAZATROL, controller model: MATRIX, number of spindles: 1, CONTROLS .. CNC controls MAZATROL MATRIX Gislhewy Iv Hjccqrjw BASIC FUNCTIONS .. number of spindles: 1 WORKING RANGE TURNING .. turning diameter (max): 530 mm .. bar diameter (max): 65 mm .. worpiece length max.: 500 mm MAIN SPINDLE .. spindle revolutions (max): 5000 /min .. c-axis: yes X/Z SLIDE .. Z-axis travel: 550 mm .. X-axis travel: 450 mm .. Y-axis travel: 2000 mm .. rotating range B-axis up to: 190 ° .. - rotation speeds (max): 12000 /min TOOL MAGAZINE .. number of positions: 72 .. tool diameter max.: 90 mm .. - with free neighbour positions: 125 mm .. tool length max.: 210 mm ATTACHMENTS (TURNING) .. tailstock: yes .. bar magazine: yes .. - bar length (max): 1200 mm .. - bar diameter (max): 65 mm .. workpiece unloading system: yes .. thread cutting attachment: yes .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. aspiration unit: yes .. hydraulic system: yes .. European CE standards: yes

Condition: used, Year of construction: 2018, turning diameter: 370 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 207 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 760 mm, bar passage: 80 mm, bar diameter: 80 mm, controller manufacturer: MAZAK, controller model: SMOOTH G, machining diameter: 370 mm, number of spindles: 2, CONTROLS .. CNC controls MAZAK SMOOTH G BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 .. live positions: yes WORKING RANGE TURNING .. swing diameter (max): 370 mm .. turning diameter (max): 344 mm .. bar diameter (max): 80 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. spindle positioning: 0.0001 ° .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 5000 /min .. drive power: 22 kW .. spindle positioning: 0.0001 ° .. c-axis: yes X/Z SLIDE .. Z-axis travel: 760 mm .. X-axis travel: 207 mm .. Y-axis travel: 100 mm .. number of tool positions (total): 12 .. number of live positions: 12 Gjlewy Ivyshccqrsiw .. - rotation speeds (max): 6000 /min .. - drive power: 11 kW X/Z SLIDE .. Z-axis travel: 815 mm .. X-axis travel: 141 mm .. Y-axis travel: 70 mm .. number of tool positions (total): 12 .. number of live positions: 12 .. - rotation speeds (max): 6000 /min ATTACHMENTS (TURNING) .. bar magazine: yes .. - bar diameter (max): 80 mm .. workpiece unloading system: yes .. chip conveyor: yes .. coolant unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. aspiration unit: yes .. hydraulic system: yes .. European CE standards: yes Accessories - 1 set of tool holders - 1 pc. collet chuck Hainbuch 80 mm Axfix for main spindle - 1 pc. 3-jaw chuck Kitagawa BB210 for main spindle 1 pc. 1 pc. collet chuck Hainbuch 80 mm Axfix for counter spindle - Collet chuck Hainbuch 80 mm Axfix for counter spindle

Condition: excellent (used), Functionality: fully functional, turning length: 530 mm, turning diameter over cross slide: 620 mm, turning diameter: 260 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, Mori Seiki SL-25Y/500 CNC LATHE With 6m automatic bar feeder Control: Mori Seiki MF-T6 Swing over bed: 815 mm (32.1″) Gslhewy Dtzsccqrjiw Swing over cross slide: 620 mm (24.4″) Distance between centers: 620 mm (24.4″) Max. turning diameter: 260 mm (10.2″) Max. turning length: 530 mm (20.9″) X-axis travel: 195 mm +130 +65 (7.7″ + 5.1″ + 2.6″) Z-axis travel: 590 mm (23.2″) Y-axis travel: 100 mm ±50 (3.9″ ± 2.0″) Spindle speed range: 35 – 3,500 RPM Spindle nose: JIS A-8 Through spindle hole diameter: 80 mm (3.1″) Spindle bearing inner diameter: 130 mm (5.1″) Number of tool stations: 12 Shank height for square tool: 25 mm (1.0″) Shank diameter for boring bar: 50 mm (2.0″) Turret indexing time: 0.25 sec Rotary tool spindle speed: 100 – 2,000 RPM Rotary tool cutting capability: End mill max Ø20 mm, Face mill max Ø50 mm, Tap max M12 Rapid traverse rate:   X-axis: 12,000 mm/min (472.4 IPM)   Z-axis: 15,000 mm/min (590.6 IPM)   Y-axis: 10,000 mm/min (393.7 IPM) Feed per revolution:   X-axis: 0.001 – 342 mm/rev   Z-axis: 0.001 – 342 mm/rev   Y-axis: 0.001 – 500 mm/rev Jog feedrate: 6,000 mm/min (236.2 IPM) Tailstock travel: 403 mm (15.9″) Tailstock spindle diameter: 110 mm (4.3″) Tailstock spindle travel: 100 mm (3.9″) Tailstock taper: MT-5 (Live center) Spindle motor power (30 min/cont): 15/11 kW (20/15 HP) Rotary tool spindle motor: 3.7/2.2 kW (5/3 HP) Electrical power supply: 44 kVA Coolant tank capacity: 100 liters (26.4 gal) Machine height: 2,060 mm (81.1″) Floor space: 3,183 × 1,799 mm (125.3″ × 70.8″) Machine weight: 5,400 kg (11,900 lbs) Important Note: Turret Tooling Not Included with Machine FROM MEDICAL DEVICE FACILITY

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand MAZATROL Model SMOOTH X Main Drive Number of spindles 2 Spindle speed range 1 - 3300 rpm Spindle bore ø112 mm (ø4.41 inches) Number of axis 5 Movement X-Axis Movement 615 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 260 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 2563 mm Z-Axis Rapid Traverse 40 m/min W-Axis Rapid Traverse 30 m/min Tools Gijlhswyyhnjccqrow Number of index 72 Max weight 12 kg Max tool diameter 90 mm Type of tool holder HSK-A63 (T63) This 5-axis Mazak Integrex i-400S-2500U was manufactured in 2018, featuring Mazatrol SMOOTH X Control and a Hydrafeed MSV110 Barfeed. It offers a maximum machining diameter of ø658 mm and a length of 2,497 mm. Equipped with a milling spindle speed of 12,000 rpm and a tool storage capacity of 72 tools, this turn-mill centre is ideal for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the Mazak Integrex i-400S-2500U machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 6900 kg Giolhcewyygwjcqrsw Control Unit Brand FANUC Model FANUC 18i-TB Main Drive Spindle motor power 26 kW Number of axis 8 Movement X-Axis Movement 100 mm Workpiece Workpiece drm over bed 520 mm Turret Number of turrets 2 Tools Number of station 12 Additional Equipment Chip Conveyor: Yes (belt type) Part Catcher + Exit Conveyor: Yes Bar Feeder: Iemca Master 880 MP 33L (Year 2019) This 8-axis Biglia B470 YSM was manufactured in 2007. A robust turn-mill centre featuring dual spindles, each with significant power (main spindle 26 kW, sub-spindle 11 kW), and a maximum spindle speed of 3200 RPM. It includes a FANUC 18i-TB control unit, two 12-position live-tool capable turrets, and a bar feeder for enhanced productivity. If you are looking to get high-quality turning capabilities consider the Biglia B470 YSM machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,574 h, General Data Machine weight 9200 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 750 mm Y-Axis Movement 200 mm Z-Axis Movement 1100 mm Workpiece Workpiece drm 400 mm This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for tact us for more information. Gelhccjwyygdjqreiw Application Types Turning

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand FANUC Model FANUC 0i-TD Gelhowyyd Aoccqroiw Main Drive Spindle speed range 6000 Spindle motor power 7.5/5.5 kW Number of axis 6 Media Chip conveyor Yes Additional Equipment Accessories: Chip conveyor, part catcher, bar feeder (Iemca Boss 545-E), motorized tools This 6-axis Miyano BNA-42DHY was manufactured in 2013. It features a FANUC 0i-TD control unit, dual spindles with speeds up to 6000 and 5000 rpm, and two tool turrets with motorized stations. Accessories include a chip conveyor, part catcher, and a bar feeder. If you are looking to get high-quality turning capabilities consider the Miyano BNA-42DHY machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Model FANUC i Series Main Drive Spindle speed range 6000 Spindle motor power 15/11 kW Number of axis 6 Golhowyyf Toccqroiw Turret Number of turrets 1 Tools Number of station 12 Additional Equipment Accessories: Bar feeder (TOP Fusion FU350), chip conveyor, tool presetter This 6-axis DOOSAN LYNX 220LSY was manufactured in 2017. A turn-mill centre featuring a FANUC i Series control unit, it offers a max turning diameter of 300 mm and length of 510 mm. It includes a bar feeder, chip conveyor, and tool presetter. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX 220LSY machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2016, turning diameter max. 630 mm turning length 2.000 mm control 840 D sl Operate Celos distance between spindles 2.260 mm type ISM 102 turning speed range - main spindle 0 - 4.000 min/-1 power capacity - main spindel 33 / 40 kW max. Torque 580 / 700 Nm inner draw tube diameter 104 mm tool taper Capto C6 number of toolpositions 100 pos. max. tool diameter 140 mm max. tool weight 12 kg max. tool length 400 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 13,2 / 22 kW max. Torque 60 / 100 Nm tool taper Capto C6 B-Axis +/- 120 ° x-axis 650 mm y-axis +/-150 mm z-axis 2.050 mm type ISM 102 mm Spindle speed range subspindle 0 - 4.000 min/-1 power capacity - Sub spindle 28 / 37 kW inner draw tube diameter 104 mm Gislhcjwyxw Uscqrjw total power requirement 70 kVA weight of the machine ca. 24 t dimensions of the machine ca. 7,5 x 3,0 x 3,0 m CNC - Turning- and Millingcenter DMG Gildemeister - CTX beta 2000 TC - Main- Sub- and Millingspindle - Betriebsstunden: Strom-Ein: ca. 28.007h / Spindellauf: ca. 11.868h - incl. steady rest slide - Chuck flushing device on the main spindle, external - Chuck flushing device on the counter spindle, external - Coolant supply through the counter spindle - Compressed air cleaning of the safety windows of both work doors - Off-center turning and milling operations - Gear milling using the hobbing process - Technology cycle for applying an alternating speed for vibration-critical setups - WITHOUT three-jaw chuck (main- and counter spindle) - WITHOUT steady rest (carrier only) - WITHOUT tools - WITHOUT extraction system - WITHOUT measuring probe

Condition: used, Year of construction: 2009, Functionality: fully functional, Control: FANUC MSX-701 III (MAPS III) Working area: Swing over bed: 800 mm Swing over cross slide: 800 mm Max. turning diameter: 320 mm Standard turning diameter: 200 mm Golhowywqmsccqrjiw Max. distance between centers: 1,130 mm Max. turning length: 810 mm Max. workpiece size: 300 mm Travel paths X-axis travel: Turret 1: 210 mm Turret 2: 210 mm Y-axis travel: Turret 1: 110 mm (+65 / -45 mm) Z-axis travel: Turret 1: 810 mm Turret 2: 810 mm B-axis travel: Counter spindle: 920 mm Main spindle Max. speed: 5000 rpm Drive power (30 min / continuous operation): 25 / 22 kW Counter spindle Max. speed: 5000 rpm Drive power (30 min / continuous operation): 25 / 22 kW Max. bar diameter: 65 mm Spindle bore: 73 mm Equipped with: - Two direct-drive AC high-performance spindles with a drive power (30 min / continuous operation): 25 / 22 kW - Spindle orientation without locking - C-axis locking via holding brake for the main and counter spindles - Two turrets, each with 16 tool stations, Y-axis on the first turret - All tool stations prepared for the use of driven tool holders, integrated motor with a drive power of 7.5 / 5.5 kW, max. speed 6,000 rpm - LNS Quick Load Servo 65 bar loading magazine - Slat-type conveyor - Workpiece unloading system with gripper - Coolant system with increased pressure (5 bar) - 9 radial tool holders, 4 axial tool holders, 1 axial tool holder for threading - Various fixed tool holders (approx. 31) - 2 collet chucks - Workpiece collection system (custom-built) Floor area approx.: 5,120 mm x 2,721 mm Total height: 2,320 mm Machine weight: 8,300 kg

Condition: used, Year of construction: 2008, Functionality: fully functional, Turning/Milling Center with Counter Spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Spindle Power: 15/11 kW Bar Diameter: 51 mm Spindle Rotation: 5000 rpm Counter Spindle Giolhccswywp Neqrow Spindle Power: 11/7.5 kW Bar Diameter: 51 mm Spindle Rotation: 50,000 rpm Turning/Milling Spindle Power: 7.5/3.7 kW Rotation: 12,000 rpm Max. Turning Length, Lower Turret: 1005 mm Slide Travel X1 / X2 / Z1 / Z2 / B2: 455 / 222.5 / 1090 / 1005 / 1008 mm Slide travel Y1/Y2: +/- 70 / +/- 50 mm Swivel range B1 axis: +/- 95° Linear rack magazine including support robot CNC support steady Coolant cyclone filter system including 2 coolant pumps Spindle oil cooler

Condition: ready for operation (used), Functionality: fully functional, power: 7.5 kW (10.20 HP), Year of construction: 1999, turning diameter: 320 mm, center height: 160 mm, spindle speed (max.): 4,000 rpm, machine/vehicle number: 39, Equipment: documentation/manual, TECHNICAL DETAILS Swing diameter: 320 mm Minimum spindle speed: 0 rpm Maximum spindle speed: 4,000 rpm Centre height: 160 mm Centre distance: 800 mm Spindle bore: 50 mm Golowyv N Iohccqroiw Control type: Heidenhain Motor power: 7.5 kW MACHINE DETAILS Overall height: 1,800 mm Overall length: 2,200 mm Overall width: 1,600 mm Weight: 2,150 kg EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Gijlhowyvc Usccqrow Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: excellent (used), Year of construction: 2024, operating hours: 1,000 h, Functionality: fully functional, turning length: 1,050 mm, turning diameter over cross slide: 550 mm, turning diameter: 500 mm, spindle motor power: 11,000 W, spindle speed (max.): 2,400 rpm, spindle bore: 55 mm, travel distance X-axis: 290 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,050 mm, tool mount: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, milling spindle length: 1,000 mm, Equipment: rotational speed infinitely variable, 11kW Turning/Milling Center – Machine Bed Made in China; Beckhoff Control System X travel: 280 mm Y travel: 80 mm Z travel: 1080 mm Spindle speed: 2800 rpm Driven tools: 3300 rpm (Max mechanical: 6000 rpm; approx. 3kW) Tailstock: Hydraulic Chuck: Hydraulic Space requirements: approx. 3.5m x 6m; height approx. 2.3m (without oil mist extraction) We built much of our machine park ourselves. Therefore, we also gained experience with Beckhoff NC and CNC on an industrial PC basis. For this reason, we had a machine bed manufactured in China (with HIWIN linear guides and ball screws - spare parts are available in Europe) and built the control system ourselves. The control system is based on an industrial PC, which has the advantage that CNC programs can be created or adjusted directly on site using Fusion 360. This is very efficient! The relevant postprocessor is included. The machine has been in operation for about one year, with approximately 1000 operating hours (no built-in hour counter programmed). Mechanically, the machine is in excellent condition. We were able to reliably manufacture a very wide range of products, both for single-part and series production. The Z-axis features a Heidenhain linear scale. The X and Y axes are equipped with Heidenhain absolute encoders. Full access to the control system programming is available, so additional functions can be programmed at any time (!!). The price includes 4 driven tool holders (2 straight, 2 at 90°) and a variety of turning tools, holders, inserts, etc. We are selling the machine because we relocated our production abroad, where we already have a machine park. Golewyutfehccqroiw The machine can be inspected and tested at our facility at any time.

Condition: excellent (used), Year of construction: 2004, operating hours: 12,500 h, Functionality: fully functional, * Nakamura Tome Super NTJ. * Year 2004. * 2 turrets. * 2 heads. * 9-axis controlled turning and milling center. * Machine with facing heads. * 1.5-meter Iemca bar loader. * Upper turret with Y axis with +- 45 mm and with 180-degree B axis indexing. * Lower turret with C axis motorized tools. * Both turrets with 12 stations each and all of them motorized. * Main head motor 15 Kw and secondary 11 Kw. * Milling motor power 7.5 Kw. * Motorized tool speed 6,000 rpm. * Interface to connect bar loader. * Front bucket-type piece collector and rear gantry-type with 3 Kg capacity. * Cutting power 320 N/M. * Distance between centers 780 mm. Gelhccowyumreqreiw * MQ system for tool clamping. * Bar passage of main head 65 mm and secondary 52 mm * Head size A2-6. * Head speed 5,000 rpm. * Rapid traverse speed 25 m/min on X and Z axes. * Turret change indexing time 0.2 seconds. * Monoblock bed. * High-precision collet chuck on main head. * Kitagawa 165 mm chuck on secondary head. * Renishaw tool measuring arm. * Lateral hinge-type chip extractor. * Fanuc 18A CNC. * Automatic conversational programming with Fanuc Manual Guide. * Tool life management and consumption monitor. * Automatic stress control. * Double pedal for opening and closing main chuck and independent sub-spindle. * Machine currently in production. * Inspectable by a qualified Nakamura technician. * Impeccable condition. * Electric transformer, documentation, parts list, electrical diagrams, programming and operating manual. * Machine always machining with cutting oil, never coolant. * Weight 12 tons. * Immediate delivery time except for immediate sale.

Condition: like new (used), Year of construction: 2008, operating hours: 1,800 h, Functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2008. * Only 1,900 cutting hours. * 5-axis machine. * Sub-spindle. * 12-station turret, all stations live tooled. * Y-axis travel ±60 mm. * C-axis on both spindles. * Integrated main spindle motor 18 kW. * Integrated sub-spindle motor 15 kW. * Direct-drive live tool motor 5.5 kW. * Motor starting torque 640 N·m. * Beltless, gearless drive motors. * Main spindle nose size A2-8. * Sub-spindle nose size A2-6. * Bar capacity 80 mm. * Main spindle chuck: Kitagawa B-210 (250 mm) metric system. * Sub-spindle chuck: Kitagawa B-208 (210 mm) metric system. * Box ways on all axes. * Main spindle speed 4,000 rpm. * Live tooling speed 6,000 rpm. * Oil chiller for both spindles: Daikin. * Mapps 4 conversational automatic programming system. * Automatic load control and tool consumption monitoring. * Rapid traverse speed 30 m/min in X and Z axes. * Turret indexing time 0.2 seconds. * Dual Renishaw arms for automatic tool measurement. * Communication ports: USB, PCMCIA card, and RS232. Gijlhccqowyud Dersw * Interface for bar feeder installation. * Automatic parts catcher. * Dual pedal for independent opening and closing of main and sub-spindle chucks. * Side-mounted chip conveyor (hinged type). * Extensive set of static and live tool holders included. * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and operations manual. * Weight: 5,800 kg. * Machine currently in operation. * Precision check videos are essential. * Machining only of aluminum components. * Actual cutting hours: 1,800. * Immediate delivery unless sold prior.

Condition: like new (used), Year of construction: 2012, operating hours: 1,800 h, Functionality: fully functional, * Mori Seiki NZ 2000 T2 Y2. * Only 1,600 cutting hours. * Never connected to a bar feeder. * Used exclusively for aluminum prototype manufacturing for the F1 industry. * Approx. €35,000–40,000 in tooling/equipment. * Opposed-spindle configuration. * 9-axis CNC turning and milling center. * Twin spindles. * Spindle nose size: A2-6. * Two superimposed turrets. * Two C-axes. * Two Y-axes. * Two integrated 22 kW spindle motors. * Milling motor power: 7.5 kW. * Two Renishaw automatic tool measurement arms. * Mapps 5 conversational automatic programming system. * Automatic load monitoring and tool wear control. * Tool life management and consumption monitoring system. * Dual foot pedal for chuck open/close. * Spindle head oil chiller. * 340 Nm cutting torque. * Both turrets with 16 stations each, all live positions. * Tool setup capability: up to 32 tools per turret. * Interface for bar feeder installation. * Automatic rear parts catcher with special gripper for long workpieces. * External and internal toolholders included. * Axial and radial driven tool blocks. * MQ tool clamping system. * Max. swing diameter: 320 mm. * Turning length: 810 mm. * Control: Mori Seiki MSX-701 III. * Max. distance main spindle to sub-spindle: 1,130 mm. * Main spindle speed: 5,000 rpm. * Sub-spindle speed: 5,000 rpm. * Live tooling speed: 6,000 rpm. * Max. bar diameter: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub-spindle travel: 920 mm. * Rapid traverse X1, X2, X3: 30,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 50,000 mm/min. * C-axis resolution: 0.001°. * Both spindles equipped with Hainbuch high-precision collet chucks. * Side-mounted hinged belt chip conveyor. * Connectivity via USB, PCMCIA card, and RS-232 ports. * Machine weight: 8,300 kg. * Machine available for inspection under power. * Approximate new price: €450,000. Gielowyub Nohccqrsw * Supplied with transformer, documentation, parts list, electrical diagrams, programming, and operation manual. * Immediate delivery subject to prior sale.

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 7500 kg Control Unit Brand MAZATROL Model Fusion 640MT Main Drive Number of spindles 2 Spindle speed range 5000 Number of axis 3 Movement X-Axis Movement 530 mm Y-Axis Movement 140 mm Z-Axis Movement 1065 mm Tools Type of tool holder KM-63 Media Chip conveyor Yes Giolhccqowyqfwerow This 3-axis Mazak INTEGREX 200 SY was manufactured in 2001. A robust turn-mill centre featuring dual spindles and a MAZATROL FUSION 640MT control unit, it offers a spindle speed of 5000 1/MIN and movements of X-530 mm, Y-140 mm, Z-1065 mm. Consider the opportunity to buy this Mazak INTEGREX 200 SY turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2760 mm Measurements depth 5350 mm Measurements height 2616 mm Machine weight 20000 kg Control Unit Brand INDEX Model C200-4D Main Drive Spindle speed range 30-3500 Spindle motor power 43 kW Number of axis 3 Movement X-Axis Movement 320 mm Z-Axis Movement 2000 mm Turret Number of turrets 1 Tools Number of station 12 Type of tool holder VDI40 Additional Equipment Coolant Internal Supply: Yes Coolant Filter: Paper belt (150 l/min with emulsion) Chip Conveyor: 1250 mm ejection height Automatic Sliding Door: Yes Foot Switch: Yes This 3-axis Index G 400 Ratio Line was manufactured in 2008. A CNC universal lathe featuring a C200-4D control, linear roller guides, and a cast machine bed. It boasts a turning length of 2000 mm and a maximum turning diameter of 630 mm. The main spindle delivers up to 57 kW of power and 363 Nm of torque. Consider the opportunity to buy this Index G 400 Ratio Line turn-mill centre. Contact us for more information about this machine. Application Types Turning Gijlhccowyqgbeqrjw

Condition: excellent (used), Year of construction: 2017, Lathe Huron AX 300 MY Travel ranges: XYZC 250/ + - 40/625 mm Y: +/- 40 mm 12-position BMT 55 turret Spindle speed: 4000 rpm Power chuck: 250 mm Gijlhewyp Azoccqrjw Spindle bore: 65 mm Tailstock Chip conveyor Siemens 828 D control