SUMA GmbH

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, input voltage: 220 V, year of last overhaul: 2018, Equipment: type plate available, CNC 3D Measuring Machine Model: WENZEL 6 10 5 CNC + MIH + TP20 + styli ● Year: 2002 ● Measuring range: 600 x 1000 x 500 mm ● Full CNC control ● High-stability granite structure ● Air bearing guides ● Precise, rigid, and reliable machine Equipment included: ● Renishaw MIH manually indexable head ● Renishaw TP20 probe with modules ● Set of Renishaw styli ● CNC control unit ● Complete electrical cabinet ● PC + measuring software (if present → to be confirmed) ● Clamping plate / accessories ● Documentation Condition: ● Very clean, well-maintained machine ● Last calibration: 2018 ● Machine under power → demonstration possible Dledpox Ebx Asfx Ab Tea ● Smooth axis movement, no abnormal play Transport: ● Dismantling and transport at buyer's expense

Condition: excellent (used), Hommel Hommel Tester T1000 Surface Roughness Measuring Instrument – Jenoptik – incl. probe & case Item Description: Dledpfxsx Ebuwe Ab Tja For sale is a Hommel Tester T1000 by Jenoptik / Hommel-Etamic. The T1000 is a precise portable surface roughness tester that uses a tactile stylus to measure the surface roughness of various workpieces. Measured values such as Ra, Rz, and Rmax are displayed immediately on the screen. An integrated mini-printer additionally allows for direct printout of measurement protocols. The device is suitable for use both in production environments and in laboratories. Technical data: Model: Hommel Tester T1000 Manufacturer: Jenoptik / Hommel-Etamic Measured parameters: Ra, Rz, Rmax, etc. Measuring range: Ra approx. 0.03 – 20 µm Display: LCD screen with direct measurement readout Dimensions: approx. 28 × 20 × 10 cm Power supply: Power adapter 230 V AC → Device 9–12 V DC Weight: Device approx. 1.5 kg, in case approx. 3–4 kg Hommel Tester T1000 External surface roughness probe Two additional stylus probes in cases Power supply Original transport case Connection cable Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, For sale: SMA / EyeC Profiler 1200 DT (2022) — A0+ large-format archival & inspection flatbed scanner in excellent / like-new condition, with the original touchscreen protective film still in place. This unit comes with its dedicated Dell workstation and Dell monitor, fully configured with EasyScan / ScanWizard Touch software as originally supplied. Ready to operate immediately. Technical Specifications: Scan area: A0+ (1200 × 850 mm) Optical resolution: True 1200 dpi Lighting: LED cold-light system Hardware: Premium German SMA flatbed mechanism Branding: EyeC Proofiler outer chassis Software: EasyScan / ScanWizard Touch (license transferable) Interface: USB / SMB / FTP / Cloud Manufacture year: 2022 Condition: Like new Computer included: Dell Workstation PC (factory pre-installed) Dell monitor Power cables, USB, network cables Ideal for: National libraries & archives Universities (architecture, engineering, art) Museums Print & packaging quality control Map / blueprint digitization Dlsdpfjx Ea Rwsx Ab Toa Cultural heritage projects Price: 68,000 € (EXW Turkey) Photos and videos available. Worldwide shipping available.

Condition: like new (used), Year of construction: 2022, For sale: SMA / EyeC Profiler 1200 DT (2022) — A0+ large-format archival & inspection flatbed scanner in excellent / like-new condition, with the original touchscreen protective film still in place. This unit comes with its dedicated Dell workstation and Dell monitor, fully configured with EasyScan / ScanWizard Touch software as originally supplied. Ready to operate immediately. Technical Specifications: Scan area: A0+ (1200 × 850 mm) Optical resolution: True 1200 dpi Lighting: LED cold-light system Hardware: Premium German SMA flatbed mechanism Branding: EyeC Proofiler outer chassis Software: EasyScan / ScanWizard Touch (license transferable) Interface: USB / SMB / FTP / Cloud Manufacture year: 2022 Condition: Like new Dedex Ea Hxjpfx Ab Tela Computer included: Dell Workstation PC (factory pre-installed) Dell monitor Power cables, USB, network cables Ideal for: National libraries & archives Universities (architecture, engineering, art) Museums Print & packaging quality control Map / blueprint digitization Cultural heritage projects Price: 68,000 € (EXW Turkey) Photos and videos available. Worldwide shipping available.

Condition: used, Faro Faroarm Quantum M Measuring Arm Arm Length: 3.0m Number of Axes: 7 axes Year of Manufacture: 2020 Model: 21000 Repeatability (SPAT): 0.0042 mm Volumetric Accuracy (EUni): 0.054 mm We are happy to provide you with a brochure for the software upon request. CAM2 Probe/Professional Stylus – €9,249 net/license CAM2 Essentials – €2,888 net/license You are welcome to arrange a viewing. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and have a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Please note that deviations from the technical data or errors in the article description may occur and are reserved. Dlsdpfjx D Tnyox Ab Tea

Condition: new, Year of construction: 2010, connected load frequency 230 V dimensions 1,6 x 0,8 x 1,55 mm Bubble wrap machine - Documentation - Includes 7 rolls of film - Like new condition Dodsx Dnftopfx Ab Tjla See pictures

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Dljdex Dmr Eopfx Ab Tja Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm Djdpfx Aex Dda Teb Tola voltage 26,8 V total power requirement 26,8 kW weight of the machine ca. 0,040 t

Condition: excellent (used), functionality: fully functional, We offer a Keyence stripe light measurement device. Series VL 350, including PC, software, and calibration disc. This allows for stand-alone operation. Strengths: • Contactless measurement: As the system is optical and does not use a mechanical touch probe, it is ideal for measuring delicate or sensitive workpieces with fragile coatings (no deformation caused by a measurement probe). > High accuracy & repeatability: Measurement accuracy of ±10 µm and repeatability of 2 µm make it suitable for a wide range of industrial quality control applications. > Flexible measuring range: Capable of measuring larger components (up to Ø 300 mm × H 200 mm) as well as small detailed parts (Ø 70 mm × H 50 mm) — with easy switching between low and high magnification. > Versatile application: The rotatable and tiltable table enables measurement of various geometries and complex workpieces. The device is suitable for: > Quality control and 3D inspection of parts in manufacturing — for example, workpieces made from plastic or metal > Measurement and reverse engineering of complex geometries where contactless measurement is advantageous > Areas where high precision and repeatability are essential — for evaluating form and positional tolerances > Digitizing components with STL output for subsequent 3D printing. Original packaging is available – courier delivery can be arranged for an additional fee. Transport and loading can be organized throughout Europe at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Djdpfx Aex Dcg Ssb Tsla For further information or to get in touch, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Precise Profile Measuring Instrument | Excellent Condition | Ready for Immediate Use For sale is a Chotest SJ-5760P, a high-precision contour measuring instrument designed for geometric profile analysis in quality management, toolmaking, mechanical engineering, and research. This unit provides accurate measurements with extended travel ranges and features a stable granite base for reliable results. — Condition • Pre-owned, technically inspected • Fully operational • Very well maintained — Technical Highlights – Chotest SJ-5760P Travel Ranges • X-axis: 0–200 mm • Z-axis: 0–450 mm • Device dimensions: 800 × 450 × 1100 mm • Weight: 220 kg — Profile Measurement (SJ-5760P) • Measuring range Z1: ±25 mm • Resolution: 0.001 µm • Measurement direction: Top / Down • Measuring speed: 0.05–5 mm/s • Positioning speed: X/Z up to 20 mm/s • Measuring force: 10–150 mN, adjustable • Guideway deviation: ≤1 µm / 200 mm Accuracy • X-axis indication error: ±(0.5 + 0.015L) µm • Z1-axis indication error: ±(0.5 + 0.05H) µm • Distance: ±(0.8 + 0.02L) µm • Radius: ≤(1 + R/15) µm • Angle: ≤±45’’ — Key Features • Ideal for precise contour and profile measurements • Extremely high vertical resolution (0.001 µm) • Very stable granite base for low-vibration operation Dodsx Db Stjpfx Ab Tela • Large travel ranges for diverse component geometries • User-friendly and reliable measuring technology • Suitable for micron-accurate form measurement in both laboratory and production environments

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Dsdpfx Abjx A Ur Ro Tola Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: used, functionality: unexamined, machine/vehicle number: TDS 784C, input voltage: 220 V, Tektronix TDS 784C Oscilloscope Manufacturer: Tektronix Dljdjx A Arljpfx Ab Toa Model: TDS784C

Condition: ready for operation (used), 1 set (5 pieces) of micrometers, in wooden case Dledpfx Abex Anp Nj Tsa Sizes: 0 - 25, 25 - 50, 50 - 75, 75 - 100, 100 - 125, 125 - 150 mm

Condition: excellent (used), functionality: fully functional, Very good leak calibration device in a case. Dledpexz R Apofx Ab Toa

Condition: ready for operation (used), Year of construction: 1986, Offered is a tensile testing machine year 1986 including hydraulic clamping jaws, load cell: PM 630 Rn, measuring-control unit: Doli EDC 580, nominal load: 600kN, clamping head distance: 150mm-650mm, piston stroke: 500mm, spare clamping head, machine dimensions X/Y/Z: 850mm/600mm/3200mm, machine weight: approx. 3500kg, calibrated annually. Inspection is possible by arrangement. Dodpfjxz Ewzex Ab Tsla

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 10-0162, PROLINER 10CS digital measuring device. Dljdpfexz Ed Uex Ab Tsa Manufactured 2019. New battery and factory checks in 2024. Software version 4 (decking). Includes trípod, 10m cable, spare battery and charger, 2 remote controls, hard travel case and soft rucksack case.

Condition: excellent (used), Quality Vision OGP SmartScope FLASH CNC 300 For sale is an OGP SmartScope FLASH CNC 300, a high-quality multi-sensor coordinate measuring machine for precise 2D/3D measurement tasks. This system comes from industrial use and is ideally suited for quality assurance, production, toolmaking, and laboratory applications. Description: The FLASH CNC 300 is a CNC-controlled optical measuring system with optional laser and touch probe technology. It enables highly precise measurement of mechanical components – e.g. diameters, heights, distances, contours, and geometric elements. Thanks to its video technology, motorized zoom optics, and multi-sensor-capable architecture, it is particularly versatile in application. Technical Data: Model: SmartScope FLASH CNC 300 Manufacturer: Optical Gaging Products / Quality Vision International (USA) Measuring range (XYZ): 300 × 300 × 250 mm Max. workpiece weight: up to 30 kg System weight: approx. 160 kg Power supply: 230 V~, 50/60 Hz, 2.5 A Shipping weight (packed): approx. 340 kg Measuring Methods & Equipment: Optical video system with motorized 12:1 AccuCentric® zoom Automatic zoom calibration for highest repeatability LED illumination: - Transmitted light (profile) - Coaxial incident light - SmartRing™ LED ring light Optionally usable sensors: - Laser (TTL laser) Dljdpfexz A Evex Ab Tja - Touch probe / scanning probe - Microprobes / height measurement Supported software (model-dependent): Measure-X, ZONE3, etc. Fields of Application: - Quality assurance - Batch and single part inspection - Measurement of plastic, metal, and milled parts - Precision optics, mold, and tool measurement - Laboratory, production, and research Condition: used Scope of supply: (see image) (Specifications are subject to change and errors excepted!) We would be happy to answer further questions for you by phone.

Condition: ready for operation (used), Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-2000 coordinate measuring system. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld Dodpjxzn E Ujfx Ab Tjla ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 7 December 2025. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: ready for operation (used), Year of construction: 1963, A LOS material tensile testing machine is offered. Test material reinforcing steel, max. tensile force approx. 120kN, last calibration 2023, inspection possible by arrangement. Dljdpfx Abjxzikxj Tja

Condition: ready for operation (used), Year of construction: 1993, Offered is a Schenk/Trebel material tensile testing machine with retrofitted testing software from Doli year 1993, test material: reinforcing steel, max. tensile force 200kN, clamping tool as well as extensometer from Mess- und Feinwerkzeug GmbH MFL 300/500 with sensor and base. Viewing possible by arrangement. Dedpfx Aboxziklo Tela

Condition: ready for operation (used), Year of construction: 1984, Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment. Dodpexzik Ejfx Ab Tola

Condition: ready for operation (used), Year of construction: 1979, Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement. Dljdpfx Aoxzikrjb Tsa

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: SP.10.93015388, Artec Space Spider is a professional, handheld 3D scanner with extremely high resolution, utilizing blue structured light technology. It was originally developed for the International Space Station (ISS) and is valued for its accuracy and operational stability in variable environmental conditions, thanks to its advanced temperature stabilization system. VAT invoice or sales agreement available. Courier delivery upon bank transfer. Personal collection available after bank transfer or cash on pickup. Key features and specifications: - 3D accuracy: up to 0.05 mm - 3D resolution: up to 0.1 mm - Texture resolution: 1.3 megapixels (Mpx) - Scanning speed: up to 7.5 frames per second (equivalent to processing up to one million points per second) - Technology: Blue LED structured light, safe for humans and objects - Tracking: Hybrid, based on geometry and color, does not require measurement markers - Weight: 0.85 kg, offering high portability - Compatibility: Works with Artec Studio software, enabling data processing and export to popular CAD formats (e.g., STL, OBJ, PLY) - Portability: Can be powered by an optional battery pack, facilitating field operation without a constant power source Dodpfexzd Ilox Ab Tola Original battery included. Calibration kit included. Original transport case included.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MMQ44-5440633#2116, For sale: Mahr form tester in good, fully operational condition. The form tester is ideal for measuring roundness, flatness, concentricity, as well as other form and positional parameters in quality control and metrology labs. There are no more jobs for the machine, which is why it is being sold. ✔ Fully functional Dlsdpfxexy Nnno Ab Tja ✔ Includes PC & software ✔ Accessories & ergonomic measuring table included ✔ Device can be inspected and tested on site at any time

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Djdpfx Aboxywh Ns Tola Technical specifications: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) If you have further questions, we will be happy to answer them by phone.