GGPlast

GGPlast from Środa Wielkopolska

For more than 30 years, GG Plast Technology has been a leading supplier of plastic processing machinery from renowned Taiwanese manufacturers in Central Europe.

With many years of experience, we offer our customers comprehensive solutions ranging from consultation, delivery, and support with installation and commissioning, to service support and spare parts supply.

It is our thorough care and customer service that has set us apart from other suppliers of imported equipment from the very beginning.

Currently, we offer a wide range of machines and systems for plastic processing. Our customers include small family-run businesses as well as the largest companies in the industry.

Plastic recycling plants are a leading product in our portfolio. We configure the equipment so that its performance and features are suitable both for processors of post-production waste and post-consumer recyclers handling waste on an industrial scale. The input material is recycled and transformed into a valuable raw material.

In addition to plastic recycling lines, we supplement our range with extruders for the production of polyethylene films. Our broad selection of machines includes both extruders for single-layer films and highly efficient multilayer lines for processing primary plastics as well as regranulates. Thanks to the high quality of the machines offered and the wide range of peripheral devices, they are especially popular with customers who value the balance of product quality, efficiency, and price.

Over the past years, we have provided our customers with several hundred production lines, which serve as excellent references for us and allow us to continuously support their advancement.

From investment planning consultation and assistance with assembly and commissioning, to service and after-sales support, we collaborate continuously with occupational safety specialists who monitor the production of the machines and ensure compliance with European standards. They also oversee the creation of documentation in line with EU regulations.

We take a variety of steps to strengthen our position as a leading supplier of plastic processing machinery. Our suppliers are committed to continuous improvements so that the end products meet the highest standards of modern production.

Customer satisfaction, trust, and long-term cooperation are our top priorities.

GGPlast
Plantaża 20
63-000 Środa Wielkopolska
Poland
Województwo wielkopolskie

Current offers from similar dealers

Listing

Wash Line with Extruder Plastic Film Wash Line with Extruder Wash Line

Kells

18,603 km

Wash Line with Extruder
Plastic Film Wash Line with ExtruderWash Line

Call

Listing

Single Screw Extruder Rollepaal A-Rex 90-33

Breda

18,625 km

Single Screw Extruder
RollepaalA-Rex 90-33

Call

Listing

Co-rotating twin-screw extruder COWELL EXTRUSION CWT95-Plus

Saint-Étienne

19,113 km

Co-rotating twin-screw extruder
COWELL EXTRUSIONCWT95-Plus

€220,000

ONO plus VAT

Call

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: Bodpfxozxxifs Acnoll *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

See details

Listing

Parallel twin-screw extruder WEBER DS 7.22

Burnhaupt-le-Haut

18,802 km

Parallel twin-screw extruder
WEBERDS 7.22

Call

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD Bjdozxr Uuspfx Acnell - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

See details

Listing

Twin-screw extruder KraussMaffei KMD 114-32

Dorfen

18,447 km

Twin-screw extruder
KraussMaffeiKMD 114-32

Call

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 Blsdpfx Acezxhfionjl - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

See details

Listing

Two stage extruder & FIMIC auto filter OMP Prealpina 130/160mm Cascade

Zarasų rajono savivaldybė

17,239 km

Two stage extruder & FIMIC auto filter
OMP Prealpina130/160mm Cascade

Call

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Bodpfjzwhtdex Acnsll

See details

Listing

Baker Perkins MP24PH Twin Screw Extruder BAKER MP24PH

Hradec Králové 4

18,115 km

Baker Perkins MP24PH Twin Screw Extruder
BAKERMP24PH

Call

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: Bjdpfx Aezvn Dascnoll - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

See details

Listing

Double Screw Extruder CINCINNATI Titan 45R-APC

Breda

18,625 km

Double Screw Extruder
CINCINNATITitan 45R-APC

Call

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is currently in storage at Plastima Used Machinery. The machine was manufactured in 1998. – Brand: Cincinnati – Model: Titan 45R-APC Blsdpszu Nnqofx Acnsl – Year of manufacture: 1998 – Conical twin-screw extruder – Screw diameter: 45 mm – Operating hours: 64,082

See details

Listing

Breda

18,625 km

Extruder
WeberDS120

Call

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Screw diameter: 120 mm • One pair of original WEBER screws (in excellent condition, including measurement report) Bledozu Nl Ajpfx Acnol • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

See details

Listing

Double Screw Extruder Leistritz Micro 27/40 D

Breda

18,625 km

Double Screw Extruder
LeistritzMicro 27/40 D

Call

Listing

Slovakia

18,033 km

Winder
hubral700

€3,000

Fixed price plus VAT

Call

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Electrical control cabinet IMO iSmart controller Lenze frequency inverter Bljdpfjzu Nf Aox Acnsl 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Price: €3,000 For further information or additional photos, please contact me via message.

See details

Clickout

Injection molding machine BATTENFELD BEX-1-150-32-D-V / BEX 45-25E

Jászberény

17,921 km

Injection molding machine
BATTENFELDBEX-1-150-32-D-V / BEX 45-25E

86 days left

Details

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Bodpfjzump Esx Acnsll Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

See details

Listing

Compounding Line Berstorff ZE 25 compounding line

Breda

18,625 km

Compounding Line
BerstorffZE 25 compounding line

Call

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Bedpfxozuk Tne Acnoll Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

See details

Listing

Breda

18,625 km

Extruder
KraussMaffeiKME 38-30

Call

Listing

Breda

18,625 km

Plastic processing machine
WeberDS 8.7

Call

Listing

Twin-screw extruder COPERION ( Werner & Pfleiderer ) ZSK 170 W 1920/1750

Langenfeld (Rheinland)

18,569 km

Twin-screw extruder
COPERION ( Werner & Pfleiderer )ZSK 170 W 1920/1750

Call

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Bsdpfx Ajztu Dbocnoll Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

See details

Listing

Dorfen

18,447 km

Twin-screw extruder
KraussMaffeiKMD 63

Call

Condition: good (used), Year of construction: 2004, Twin-screw extruder, Krauss Maffei KMD63 model, for sale. The extruder is fully functional. The screws have been removed and can be inspected on site. - Year of manufacture: 2004 - C4 control system - The price applies to the extruder only, excluding any follow-up services. Loading, export documents, delivery, etc. can be arranged upon request. Blodszr N Urspfx Acnsl Please feel free to contact us if you have any questions.

See details

Auction

Nordrhein-Westfalen

18,549 km

Extruder
CoperionEGR 200

Details

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, No minimum price – guaranteed sale to the highest bidder! Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for hard PVC Suitable for HFFR formulations Suitable for elastomer compounds for low, medium and high voltage cables TECHNICAL DETAILS Screw diameter: 200 mm Bodpfx Acjzr H Ebjnoll Length from feed to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

See details

Auction

Extrusion line with stuffing unit Extrusion line AM-145

Nordrhein-Westfalen

18,549 km

Extrusion line with stuffing unit
Extrusion lineAM-145

Details

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Bledpjzr Hz Aofx Acnol Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

See details

Listing

Twin Screw Extruder Weber DS-85 Hans Weber Maschinenfabrik DS 63

Rhede

18,523 km

Twin Screw Extruder Weber DS-85
Hans Weber MaschinenfabrikDS 63

€250

Fixed price plus VAT

Call

Listing

Extrusion tooling, accessories, spinneret JC Times USEON Flachstempel

Wiefelstede

18,341 km

Extrusion tooling, accessories, spinneret
JC Times USEONFlachstempel

Call

Condition: good (used), Extrusion tool accessories, extruder -Manufacturer: JC Times USEON, Extrusion Tooling Accessories -Type: unfortunately without type designations Bedpfx Acszpwcxjnsll -Perforated plates: 3 pieces 1940/210/H60 mm -Individual components: see photos -Price/Fee: complete -Transport dimensions: 3150/1095/H1790 mm / 2050/300/H900 mm -Weight: 2510 kg / 560 kg

See details

Listing

Single-screw extruder 60-30 Cincinnati CINCINNATI PROTON 60LD30

Portomaggiore

18,596 km

Single-screw extruder 60-30 Cincinnati
CINCINNATI PROTON60LD30

€9,800

EXW ONO plus VAT

Call

Listing

Twin-screw extrusion line Krupp Werner & Pfleiderer (Coperion) ZSK 50 Mc 900

Nürnberg

18,453 km

Twin-screw extrusion line
Krupp Werner & Pfleiderer (Coperion)ZSK 50 Mc 900

Call

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Previous process: ABS recycling The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Drive power: 181 kW Screw speed: up to 1200 rpm Bedpfezn Um Esx Acnsll including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September.

See details

Listing

PMH twin screw extruder25 mm - 32 l/d PMH Plasticmaschinen handelsgesellschaft PMH DS25-32LD twin-screw extruder

Kecskemét

17,949 km

PMH twin screw extruder25 mm - 32 l/d
PMH Plasticmaschinen handelsgesellschaftPMH DS25-32LD twin-screw extruder

€35,000

EXW ONO plus VAT

Call

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Blodpfx Aeznkx Decnjl Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

See details

Listing

Single screw coextruder IDE MEB 38/2 x25D

Ostfildern

18,612 km

Single screw coextruder
IDEMEB 38/2 x25D

€9,800

ONO plus VAT

Call