Thomas Lehmair Schweißtecknik

Condition: ready for operation (used), Year of construction: 2019, overall weight: 5,500 kg, total width: 3,000 mm, total height: 2,400 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, product length (max.): 6,000 mm, number of axes: 3, This 3-axis Baykal BPS 2004 CNC Plasma Cutting Machine was manufactured in 2019. It features a cutting table size of 2000 x 4000 mm and is equipped with a Hypertherm XPR300 cutting system, ensuring high-quality cutting capabilities. The machine includes advanced features such as automatic torch height control and True Hole technology. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS 2004 machine we have for sale. Contact us for further details. • Control / cutting system: Hypertherm XPR300 with Optimix gas console; True Hole technology; True Bevel ready; automatic torch height control • Axes: 3 (X, Y, Z) with collision detection • Cutting table: 2000 x 4000 mm Podpjzhvuwefx Aahopu • Supported materials: mild steel, stainless steel, aluminium • Drive/mechanics: Helical gear drive; Bosch Rexroth servo motors and controllers • Extraction: Segmented exhaust system with 4/5 independently opening chambers • Machine hours: 275 cutting hours • Status/condition: Machine under power; like-new working condition

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC oxy-fuel cutting machine in very good condition, lightly used. Ppodpfxezhby Sj Aahou

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: Pjdpfx Aaezhbf Ujhopu • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Podozgu Rnopfx Aahopu Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Mains voltage 3x400V Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Condition: used, cutting range for steel to 0,5 - 120 mm capacity at 100% 440 A mm cutting medium PerCut 451 dimensions ca. 1030 x 680 x 1450 mm weight ca. 600 kg Contour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Pedpfxszginhs Aahepu Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the material The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means considerably higher flexibility. The inverter technology allows the highest marking quality and functionality. The HiFocus 440i neo is ideally suited for steel service centers, steel producers and distributors because it can be combined with 2D or 3D CNC-controlled guiding systems like gas cutting machines, robots and pipe cutting machines. With HiFocus neo the user benefits, compared to competitors, from higher speeds when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to optimised technology, the consumables are handled gently and the plasma cutting process is more efficient

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Podpfx Aajzd Ur Tshepu Type: GV 60 20 Table dimensions: 6000 x 2000 mm Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Modesta extraction system Includes spare parts Year of manufacture: 2008 CNC control renewed in: 2018

Condition: used, total length: 28,000 mm, For sale: MGM OMNICUT PGV3 CNC plasma and gas cutting machine. The machine is used, fully functional, and operational. It can be inspected and tested on-site. These CNC thermal cutting machines are manufactured by the Czech company MGM Tábor and are designed for plasma and gas cutting of metal sheets. The MGM OmniCut series is designed for professional, heavy-duty, and continuous operation, making it ideal for the production of large metal structures. Technical specifications: Manufacturer: MGM Tábor Model: OMNICUT PGV3 CNC control Plasma cutting Gas cutting Working table length: approx. 28,000 mm Working table width: approx. 3,000 mm Cutting thickness: Plasma: from 0.5 mm to 150 mm (depending on the plasma source) Gas cutting: up to 300 mm Heavy-duty portal construction Designed for continuous operation in industry Advantages: Large working area Plasma and gas cutting capability in one machine Suitable for cutting thick and large-format metal sheets CNC control ensures precise and repeatable cutting Reliable industrial construction The machine is connected and in use Can be seen in operation in production Application: Ideal for the production of metal structures, shipbuilding, energy, heavy industry, agricultural machinery, bridges, tanks, and other large metal products. If you have any further questions, we will be happy to answer them. Ppsdpszd Td Iofx Aaheu

Condition: ready for operation (used), Year of construction: 2013, cutting speed: 12,000 mm/min, total width: 2,000 mm, total height: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: BECKHOFF, number of axes: 4, This 4-axis VOORTMAN VCS Thermo was manufactured in 2013. It features a multi-axis automated chamfering/bevel head and is equipped with a Hypertherm HPR260XD plasma source with Truehole technology. The machine includes an integrated Beckhoff operator console and Beckhoff nesting software. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VCS Thermo plasma cutting machine we have for sale. Contact us for further details. Ppsdpjzd Abpefx Aahsu - Cutting Head Setup: Multi-axis automated chamfering/bevel head- Plasma Source: Hypertherm HPR260XD with Truehole technology- CNC Control: Integrated Beckhoff operator console- Software: Beckhoff nesting software including security dongle- Extraction Unit: TEKA Cube filter extraction unit- Filter Condition: Minor defect reported; will be repaired and sold in fully operational condition- Additional Equipment: cutting nozzles and two heads

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Pjdpfx Aaezdz U Ujhjpu Original new price: 450,000 euros.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 10 mm, table length: 3,000 mm, working width: 1,500 mm, Carbonini plasma cutting machine, model Entry, with a working area of 3000x1500 mm. Complete with two Thermal Dynamics current generators. Work performed: - Replacement of the work surface - Replacement of the sliding guides - Management software for handling sheet metal parts Thermal Dynamics CUTMASTER 151 plasma cutter, maximum cutting capacity of 100 Amps, 30 mm. Ppsdpezdrz Sjfx Aaheu Thermal Dynamics CUTMASTER 51 plasma cutter, maximum cutting capacity of 40 Amps, 12 mm.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 6,000 mm, controller manufacturer: ESAB, controller model: Vision 51, number of axes: 4, This 4-axis ESAB Combirex CXD P 3500 was manufactured in 1997. It features a cutting current of 100 A and is capable of handling a maximum recommended cutting thickness of 31.8 mm for mild steel and stainless steel, and 25.4 mm for aluminum. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex CXD P 3500 machine we have for sale. Contact us for further details. Pjdpfjzc Rmfjx Aahspu • Cutting table: 2,000 x 6,000 mm with sectional extraction • Track length: 8,000 mm • Track gauge: 3,500 mm • Three oxyfuel torches with capacitive height sensing • One torch carriage designed as an interchangeable system for plasma torch mounting • Supply voltage: 230 V • Apparant power: 4.0 kVA • Frequency: 50 Hz • Power source: Hypertherm Powermax 1650 • Torch type: T100M • Cutting current: 100 A • Torch-to-work distance: 3.2 mm • Maximum recommended cutting thickness (Mild Steel): 31.8 mm • Maximum recommended cutting thickness (Stainless Steel): 31.8 mm • Maximum recommended cutting thickness (Aluminium): 25.4 mm • Machine retrofitted in 2008: New Hypertherm Powermax 1650 plasma source (up to 25 mm steel) including torchNew Vision 51 control system • Conversion to dual-sided X-axis drive • Optional: Rotoclean RC-S80 extraction system • Automatic filter cleaning • Optional: various spare parts for oxyfuel and plasma operation availableOxyfuel cutting has not been used for a long time and may require maintenance

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 If you have any questions or require further information, please contact us by email or phone. Ppedpfx Aezc Hn Eeahsu

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker Ppedpszc Euqofx Aaheu TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: ready for operation (used), Year of construction: 2019, overall weight: 9,000 kg, number of axes: 3, This 3-axis INANMAK MEKOR PL-YPe 3100 was manufactured in 2019. It features a working area of 3,000 × 12,000 mm and is equipped with a Hypertherm HPR400XD High Definition plasma source. The machine includes a 3D bevel cutting head and operates at a maximum positioning speed of 20 m/min. If you are looking to get high-quality plasma cutting capabilities, consider the INANMAK MEKOR PL-YPe 3100 machine we have for sale. Contact us for further details. • Plasma Source: Hypertherm HPR400XD High Definition, 400 A • Control System: Hypertherm Edge Connect CNC • Working Area: 3,000 × 12,000 mm • Cutting Head: 3D bevel cutting head • Maximum Positioning Speed: 20 m/min • Machine Voltage: 200 V / 50 Hz • Generator Voltage: 380 V / 60 A Ppodpfx Ajzcn I Hoaheu • Table Dimensions: 4,300 × 15,000 × 2,300 mm • Material Compatibility: Carbon steel, stainless steel, aluminum • Usage: Approximately 1 year • Technical Condition: Excellent Additional equipment • Inanmak filtration and dust extraction unit included

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Oxy-Fuel cutting unit Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Psdpfx Aozcfpzoahepu Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: ready for operation (used), Year of construction: 2020, total height: 2,500 mm, number of axes: 4, This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Additional equipment • Dust & Fume Extraction System: • Air Flow: 12000 m³/h • Filter Area: 171 m² Machine Benefits Technical Machine Benefits • Cutting table size: 3000 × 6000 mm Psdpfx Aaezbcmuohjpu • Tubes cutting capability: yes • Control system: texnos pc 12 or hypertherm microedge pro • Software: hypertherm cam / cnc with arcglide thc height control • True hole technology: supported with hprxd system – enables high-quality hole cutting up to 12 mm thickness. Extra Information Machine still under power Dimensions Machine Depth 8100 mm

Condition: excellent (used), Year of construction: 2020, operating hours: 860 h, functionality: fully functional, machine/vehicle number: 2426201745, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, table length: 3,000 mm, working width: 2,000 mm, Equipment: documentation/manual, ZINSER 2426 CNC plasma cutting machine with Hypertherm XPR170 VWI Year of manufacture 2020 – Very good condition – including programming software For sale is a well-maintained and little-used CNC plasma cutting machine, type ZINSER 2426, with a Hypertherm XPR170 plasma source. The machine is in very good technical and optical condition and has only been used in our own operations. It is immediately ready for use and can be inspected and demonstrated under power after prior arrangement. Technical data: Manufacturer: ZINSER Type: 2426 Podpfx Aeza Eufeahepu Year of manufacture: 2020 Control system: ZINSER CNC 5010 Plasma source: Hypertherm XPR170 with VWI technology Cutting table: 3,000 × 2,000 mm Travel range, longitudinal axis: approx. 4,000 mm Side arm on the right Preparation for the integration of a pipe rotating unit CNC-controlled height control Programming software / nesting software included Special features: The combination of the ZINSER machine and the Hypertherm XPR170 enables precise and economical cutting operations in mild steel, stainless steel, and aluminum. The modern XPR technology ensures excellent cut quality and high process reliability. Another advantage is the existing preparation for a pipe rotating unit, which means that the machine can be easily expanded if required. Scope of supply: ZINSER 2426 CNC plasma cutting machine Hypertherm XPR170 plasma source ZINSER CNC 5010 control system Programming software / nesting software Documentation and manuals Not included in the scope of supply: Extraction system. Location: Austria Inspection and test cut possible after prior arrangement. Disassembly and transport are to be organized by the buyer.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis SOITAAB Plasmatech-Red was manufactured in 2017. It features a working range of 6000 × 2000 mm and a cutting speed of 40 m/min. The machine is capable of plasma cutting with a maximum output of ±400 A. If you are looking to get high-quality plasma cutting capabilities, consider the SOITAAB Plasmatech-Red machine we have for sale. Contact us for further details. Ppedpfx Aaezauu Iehsu • Working range: 6000 × 2000 mm • Speed: 40 m/min • Accuracy: ±0.05 mm/m • Z stroke: 100 mm • Plasma: up to ±400 A

Condition: excellent (used), Year of construction: 2022, operating hours: 650 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 150 mm, sheet thickness steel (max.): 150 mm, table length: 6,000 mm, working width: 2,000 mm, Equipment: documentation/manual, Used Microstep CombiCut 6001.20 for applications up to 150mm structural steel. The system has the following features: CombiCut gantry, driven on both sides Oxy-fuel cutting torch, acetylene, up to 150mm cutting capacity Piercing, fully automatic Drilling with 10.3kW drilling support Double-sided guided clamping system Drilling up to 30mm diameter Tapping up to M20 Countersinking corresponding to the drilling diameter Including calibration unit for the drilling tools All tools and carriages on the gantry are driven. Conversion to plasma cutting (straight) is possible! Tool changer mounted at the table end for 6 tools, SK40 tool holders (not included) Oxy-fuel cutting table 6000 x 2000mm, designed for sheets up to 150mm Table is cleaned and ready for immediate use (consisting of 2 elements) Table has electronic flap control Connection to a standard filter system is possible; this can be offered as an optional extra. External machine control with 24" monitor Control cabinet mounted on the gantry to minimize cable drag – therefore, very easy to maintain. Guideways: Milled S49 rails with beveled rack and pinion The machine has been fully tested and inspected. All functions are present and ready for use. The system has an Asper (CAM software) license installed and can be connected to the network. Office licenses are not included! We can offer the system with assembly and commissioning. Ppjdjy Uw Hwspfx Aahsu If assembly is carried out by us, the system will be installed with a functional guarantee. Furthermore, if assembly is carried out by AK Industry, the machine will have a 3-month warranty. Inspection possible at any time!

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. Pjdpfxjy T N R Ee Aahjpu - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.

Condition: excellent (used), Year of construction: 2017, working range: 4,000 mm, overall weight: 6,500 kg, total width: 2,400 mm, total height: 2,600 mm, total length: 6,000 mm, Working area X Axis:4000mm Working area Y Axis:2000mm Working area Z axis:400mm Ppsdpfjy T Hywsx Aahou Power resonator: 300kW / Amp Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Dust collector: Kemper Length: 6000mm Width: 2400mm Height: 2600mm Weight: 6500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 35 mm, overall weight: 4,000 kg, total width: 2,000 mm, total length: 6,000 mm, working width: 2,000 mm, travel distance X-axis: 6,000 mm, type of cooling: air, ambient temperature (max.): 40 °C, Equipment: documentation/manual, Used MicroStep oxy-fuel cutting machine (plasma system) SPL 6001.20 P with Kjellberg torch. Used, in working condition. Podpfsy T Exrox Aahepu Will be cleaned before delivery. Can be inspected on site. Exhaust system can be purchased separately.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MESSER MULTITHERM 3600 GLOBAL CNC PLASMA BED LENGTH 10300mm BED WIDTH 2100mm Ppjdpfey Tpqxox Aahsu RAIL WIDTH 3650mm HYPERTHERM HPR 260. Cutting capacities: Mild steel cut capacity Dross free* 32 mm (1-1/4") Production pierce 38 mm (1-1/2") Maximum cutting capacity 64 mm (2-1/2") Stainless steel cut capacity Production pierce 32 mm (1-1/4") Maximum cutting capacity 50 mm (2") Aluminum cut capacity Production pierce 25 mm (1") Maximum cutting capacity 50 mm (2")

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2815, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, total width: 3,500 mm, cutting current: 154 A, TECHNICAL DETAILS Working area: 9,000 mm Sheet thickness (max.): 100 mm MACHINE DETAILS Overall width: 3,500 mm Overall weight: 1,100 kg Type of input current: Three-phase Input voltage: 400 V Cutting current: 154 A Input frequency: 50 Hz Pjdpey Tkkyofx Aahjpu Short-circuit current: 6 kA IP protection rating: 43/20 Power supply: 3L+N+PE AC 400/230 V, 50 Hz

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm Pjdpfxsy Sxvho Aahspu - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.