Ligna Construct GmbH

Condition: good (used), Year of construction: 1992, Panel saw with strip curtain max. cutting length 4200 mm Blodozq Rh Depfx Amyok max. cutting width approximately 1000 mm Motor 11 kW with electric width adjustment and digital display for width stop new strips will be supplied available at the location in working condition

Condition: used, For sale: a CTR1000H40 in excellent condition with top-of-the-line features. Reason for sale: upgrading to a CTR1000H60 due to specific new orders. Condition: absolutely very good condition. Location: DE-85391 Aiterbach Contact person: Roman Griesauer Inspection: The machine is in operation and can be inspected and demonstrated upon request. Bjdpezqrrqjfx Amyolk Includes the following equipment: CTR1000H40-ZUB: Infeed system for the cut material CTR950H-DS: Dual-arm log loader CTR950H-HSD: Lever log turner CTR950H-KSD: Chain log turner CTR950H-MR: Material slide CTR950H-SP: Clamping device CTR-18.5: Motor 18.5 kW CTR-AMP: Ammeter CTR-EGL: Electrically adjustable saw blade guide CTR-KV: Cable extension for an additional section CTR-Pumpe-EA: Irrigation pump with automatic start CTR-SSP: Saw blade tensioning device CTR-ZSP: Additional control station for hydraulics

Condition: used, Woodmizer EG100 double-blade edger, in good condition, 520 mm material width, 300 mm edging width, 7.5 kW, 250 mm blade diameter, 50 mm cutting height. Bedpfxjzqq R Ss Amyjlk

Condition: used, Woodmizer EG250 double-blade sawmill, like new, maximum 80 operating hours, 15 kW, saw blades, continuously variable feed. Bedpfxjzqqn Ds Amyslk

Condition: used, Double-seam folder, 750 mm width. Bledpfx Amjzpyc Ieysk

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Bsdpfx Aezl N Tnomyolk Maximum feed width: 70 cm 0-line on the left Adjustable saw blade on the right Immediately available Location: Austria, near Ried im Innkreis

Condition: good (used), Year of construction: 1987, older but functional panel saw with a cutting length of 5.1 m Bsdpfx Aozl Hddjmyjlk max. cutting width: 0.4 m max. cutting height: 140 mm overall length: 6.35 m overall width: 1.2 m

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm Bjdpfszkkf Ajx Amyjlk • Rip fence and machine table. • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), CATALOGUE NUMBER: 8026 TECHNICAL DATA: - Max. cutting length: 3100 mm - Max. cutting height: 80 mm - Max. cutting width: 570 mm - Main saw motor power: 10 kW - Blade diameter: 450 mm - Work table height: 850 mm - Work table width: 660 mm - Dust extraction port diameter: 1x160 mm, 1x170 mm - Overall dimensions (L/W/H): 5500x2100x1600 mm - Weight: approximately 2500 kg Bjdpszf Ixpjfx Amyolk ADVANTAGES: - Suitable for trimming boards - Used saw, very good condition Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2006, machine/vehicle number: -, functionality: fully functional, input current: 40 A, type of input current: AC, cutting height (max.): 140 mm, saw blade diameter: 450 mm, saw blade bore: 80 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,100 mm, overall weight: 1,500 kg, drive type: 3 x 4 KW Motoren, operating pressure: 6 bar, compressed air connection: 6 bar, feed length X-axis: 800 mm, feed length Y-axis: 5,000 mm, main saw diameter: 450 mm, pressure: 6 bar, Equipment: saw blade guard, We are offering this used JRIMAC multi-blade saw, 2-blade version, manufactured in 2006, for sale. Machine type: Machine no.: 0060401 Rated voltage: 3/N/PE/400/230 V - 50 Hz Rated current: 40 A Power consumption: 20 kW Minimum tool diameter: 450 mm Operating pressure: 6 bar Year of manufacture: 2006 Weight: 1500 kg Length: 6500 mm Width: 1800 mm Table height: 900 mm Overall height: 2100 mm Cutting length: 5100 mm, electrically adjustable Cutting height: 140 mm, 3x Bjdpfx Aszd Hcdomyelk Cutting depth: 800 mm, 3x If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), CATALOGUE NUMBER 8019 TECHNICAL DATA - Max. cutting length: 3700mm - Max. cutting height: 1300mm - Max. cutting width: 700mm - Main saw motor power: 11kW - Clamping beam - Saw blade diameter: 550mm - Work table height: 860mm - Pneumatic clamping - Work table width: 135mm - Dust extraction nozzle diameter: 2x150mm Bsdpfjzddz Ssx Amyolk - Overall dimensions (L/W/H): 5600x1500x1900mm - Weight: approximately 3000kg - For trimming boards - Pneumatic clamping - Hydraulic saw guidance - Cutting width adjustable hydraulically - Unpainted - Used saw, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,100 mm, saw blade diameter: 600 mm, height adjustment type: electric, rotational speed (max.): 2,900 rpm, Equipment: saw blade guard, Cutting length: 6200 mm Cutting width: 1100 mm with electrically adjustable fence Cutting height: 195 mm Motor power: 11 kW Saw blade speed: 2900 rpm Infinitely variable feed speed adjustment: 1–80 m/min Two laser guides 6-position cutting height adjustment Two pneumatic clamps Bledozcuzgspfx Amyok Year of manufacture: 2010

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting PLC control Rear table width approx. 1500 mm Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Bedpfx Amezcdn Neyslk Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Torwegge Multi-Blade Saw Cutting width: 240 mm Chain width: 250 mm Cutting height: 100 mm Motor power: 30 kW Feed steplessly adjustable: 5–25 m/min Bledpoy Rqckefx Amyek

Condition: excellent (used), Paul KME 2/1000R Passage/working width: 1000 mm Cutting height: Up to approx. 120–125 mm. Motor power: 18.5 kW Cutting system: movable saw (saw sleeves), computer controlled Blsdpjyxmlksfx Amyek Feed: Infinitely variable feed adjustment Hydraulic adjustment of the upper roller height.

Condition: excellent (used), Opportunity in excellent condition from Switzerland liquidation: Irion longitudinal circular saw, 6200 mm, 15 HP, retractable saw blade, electric height adjustment, stepless hydraulic feed via foot pedal. Blsdpfxjyw N Ryj Amysk

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm pass-through width • Saw spindle newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw spindle diameter • Mechanical height adjustment of top rollers • Integrated chip removal conveyor belt Bledpeyudquofx Amyjk • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop-inspected • Machine newly painted • Hydraulic width adjustment •

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, operating hours: 7,198 h, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck It has a 7m cutting length Blodpfsyub Iqex Amyok 18.5kWh saw engine

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 150 h, power: 90 kW (122.37 HP), For sale is a like-new CS 600 multi-blade circular saw from Serra. The saw has operated for only 150 hours. Included in the price: 4 sets of spacer rings, 3 sets of saw blades, infeed table (5m), and outfeed table (5m). Technical data: Minimum cutting length: 880 mm. Cutting width up to 600 mm. Cutting height up to 160 mm. Saw blade diameter up to 500 mm. 90 kW motor. Bodpfxsynbtyj Amyolk

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades Bsdpfx Amsyam Exoyjlk 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm max. cutting height 170 mm Bledpfx Ajxiu Dtsmyjk motor 11 kW

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing Bsdpfjw Slwkex Amyslk • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw

Condition: used, Year of construction: 1999, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 310 mm, saw blade diameter: 350 mm, height adjustment type: electric, total length: 2,500 mm, total width: 2,000 mm, total height: 2,300 mm, overall weight: 8,500 kg, table height: 810 mm, cutting length (max.): 8,000 mm, feed rate X-axis: 40 m/min, power of feed motor: 4,000 W, saw drive: 15,000 W, equipped with 2 shafts (upper and lower) for a maximum cutting thickness of 200 mm 2 motors of 75 KW each Bledswy Hzuepfx Amyek cutting width: 310 mm

Condition: good (used), Year of construction: 2015, Double edging saw with electric adjustment via joystick or programming (manufacturer Weintek Austria). Alignment of the beam through 3 cross chains (can be controlled individually or synchronously). Max. cutting length 4.2 m. Kerf display with 2 lasers. Saw motors each 6.5 kW. Max. cutting width 0.6 m. Max. cutting height 80 mm. Max. cutting height 60 mm. Bljdswy Hv Eopfx Amysk

Condition: good (used), Longitudinal circular saw with max. 3 m cutting length max. cutting width 0.5 m max. cutting height 100 mm motor 12 kW Bodjwumwfspfx Amyelk total length 5.8 m total width 1.55 m