Uzun Werkzeugmaschinenhandel

Condition: used, Year of construction: 2021, turning length: 1,519 mm, turning diameter: 670 mm, total height: 2,715 mm, total length: 6,110 mm, total width: 2,700 mm, CNC Turning Milling Centre with 2nd Spindle Control Mazatrol Smooth Ai Turning diameter 670 mm Turning length 1519 mm Spindle bore diameter 102 mm Spindle nose A 2-11 Spindle nose sub spindle A 2-8 Turning speed 35-3.300 R/min Turning speed sub spindle 4.000 R/min Milling head speed 12.000 R/min Movement X-axis 695 (+570/-125) mm Movement Y-axis 300 mm Movement Z-axis 1585 mm Fodpfx Aox E Uideb Tsgk B-Axis travel -30/+210° C-Axis indexing 0,0001° Tool Taper Capto C6 Tools in tool magazine 112 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2018, Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck at 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018) Fgjdpfxjx E Ugve Ab Tok Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation on the website for supply and fitting and take this into consideration when bidding on this item. Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Fsdpfjx E Ubmjx Ab Tsgk

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals Fgsdpfx Absx E T Npj Tsk Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2011, Mazak Quick Turn Smart 200M with Mazatrol Smart Control, 215mm 2 Jaw Chuck, 12 Station ATC, Live Tooling, Powered Tail Stock, Travel X = 225mm, Z = 605mm, Swarf Conveyor (2011) Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Fsdpfex E Tzrox Ab Tegk

Condition: excellent (used), Year of construction: 1994, CNC Lathe Automatic Index GS42 Control: Index C200-8 (Sinumerik 880) Spindle bore: 42 mm, two machining turrets Turret 1 – X=120 mm, Z=220 mm, 12 tool stations (6 driven), part handover Fjdpfxox E Sqls Ab Tsgk Turret 2 – X=120 mm, Z=80 mm, 8 tool stations (4 driven) Dynamic C axis Bar feeder with magazine INDEX MBL 3500 mm, including complete set of reduction sleeves Set of clamping collets – 10 pcs Driven tool holders – 5 pcs Standard VDI20 tool holders – 5 pcs The machine is 100% operational and in excellent condition (maintains tolerances up to 0.001 mm)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Fjdpfsx E Eamex Ab Tsgk Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY (Year 2022) featuring Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Equipped with integrated spindle motors, water-cooled counter-spindle (preloaded roller guides), and Y-axis for both main and sub-spindle operations. Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0-5,000 rpm Counter-spindle: - Power output: 22 kW - Max. torque: 130 Nm - Speed range: 0-7,000 rpm Tool turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5,000 rpm Y-axis: - Travel: +/- 40 mm Additional features: - Hollow clamping cylinder incl. drawtube - C-axis for main/counter spindle - Sinumerik ONE / OPERATE control - 22" multi-touch display - SHOPTURN - 3D simulation - Residual material detection - USB interface - Electrical cabinet air conditioning - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Parts ejector and flushing via the counter spindle - Hydraulic unit - Interface for chip conveyor - Full documentation and CE certificate Control languages: German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING/SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the sub-spindle with a live center for supporting workpieces, enabling shaft machining even on machines without a tailstock. Maximum contact force limited to 50% of axis force. EMCO PROFI-NET ROBOT INTERFACE Interface for adding robots (HARTING connector; signal exchange via Profinet; safety signals 2-channel/potential-free). Digitization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connecting to MDE/BDE systems Included standard information: • Machine ON/AUX ON • Automatic mode • Production mode – program active • Program running and override between 95–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D MACHINE DATA / MT65-G2 - 3D data model of the machine - Pneumatically operated finished part catcher for gentle unloading; finished parts can be transported to a collection box (standard) or conveyor belt (option) - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 - For connecting the EMCO SL1200 short bar feeder. ...and more. The machine is immediately available! Fsdsx E Dncopfx Ab Tegk

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 400 mm, turning diameter: 60 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main spindle Ø 60 mm Counter spindle Ø 42 mm 2 turrets with 14 stations each Milling spindle on upper turret Fgodpfx Aox Ez Ndob Tjk LNS Hydrobar – bar feeder

Condition: ready for operation (used), Year of construction: 2011, operating hours: 52,298 h, functionality: fully functional, machine/vehicle number: 22/620, spindle speed (max.): 5,000 rpm, travel distance X-axis: 207 mm, bar passage: 65 mm, workpiece diameter (max.): 344 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item by 31/01/2026 at the latest! TECHNICAL DETAILS Maximum swing diameter: 370 mm Maximum machining diameter: 344 mm Maximum bar capacity: 65 mm Axis travel X1 Axis travel: 207 mm X2 Axis travel: 141 mm Y1 Axis travel: 100 mm Y2 Axis travel: 70 mm Z1 Axis travel: 760 mm Z2 Axis travel: 815 mm Main spindle Speed range: 5,000 rpm Main drive power (40% ED / 100%): 22 / 15 kW Spindle bore: 76 mm C-axis resolution: 0.0001 degree Sub spindle Speed range: 5,000 rpm Fgedsx Ezvkspfx Ab Tok Drive power (25% ED): 22 / 15 kW C-axis resolution: 0.0001 degree Turret Number of stations: 2 x 12 Tool shank height: 25 mm Boring bar holder diameter: 40 mm Driven tools Speed: 6,000 rpm Drive power: 5.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3510 x 2810 x 2480 mm Machine weight: 12,500 kg Operating hours Total operating hours: 69,718 h Automatic cutting hours: 52,298 h Pure cutting Rev. 1: 26,775 h Pure cutting Rev. 2: 15,905 h FEATURES Bar feeder interface LNS Sprint 565 bar feeder Additional coolant nozzles on main and sub spindles Signal lamp (yellow) Hainbuch Spanntop Nova Axfix SK 65 (main spindle) Kitagawa B-208 (sub spindle) Workpiece unloading device with conveyor belt C-axis sub spindle: 0.0001 degree High-pressure coolant: 70 bar Mayfran Consep 2000 II chip conveyor, ejection to the right

Condition: good (used), CNC lathe with short bar loader and NC tailstock! Available immediately! Year of manufacture 2011 – first commissioning 2015; Low operating hours, Fanuc control with Manual Guide i; 250 mm chuck, 65 mm spindle bore, turning length approx. 750 mm; Box guideways in X and Z; Chip conveyor; Tool setter; LNS short bar loader; Parts catcher with belt; Various tool holders, fixed and driven; Fully equipped for turning; Fjdpfxox Ey Ske Ab Tjgk

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Max Workpiece (Ø x Length): 170 x 330 mm. Bar Capacity: Ø 65 mm. Travels: X: 211 mm | Z: 400 mm | Y: ± 50 mm | A (Sub-spindle): 506 mm. Main and sub-Spindle Speed: 4,500 rpm Turret: 12 positions (5.000 rpm max.). Bar loader. Fgodpfx Absx Eywgs Tok

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Fodpfx Absx Emvie Tjgk Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW Fgedjx Emp Njpfx Ab Tok tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, turning length: 570 mm, turning diameter over cross slide: 300 mm, bar diameter (max.): 65 mm, For sale: GILDEMEISTER CTX 400 V5 CNC LATHE with live tools, 2 x C-axis and sub-spindle. Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V5 Control: HEIDENHAIN Country of manufacture: Germany Year of manufacture: 1997 - Machine equipped with 5 live tools - Turret: 12 positions with VDI 30 tool holders (live stations) - Max spindle speed: 5,000 rpm - Max turning length in Z-axis: 570 mm - Max turning diameter in X-axis: 300 mm Fgodpfx Abex Elq Ss Tsk - 2 x C-axis - Live tooling - Sub-spindle - Max bar diameter: 65 mm - Parts catcher Machine is fully operational, possibility for test run available.

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, Fgodpox Eitusfx Ab Tek C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: used, Year of construction: 2017, operating hours: 2,612 h, functionality: fully functional, GENERAL SPECIFICATION PUMA GT 2100M 1.1. CAPACITY : - Swing over bed (interference with front cover) / : 600 mm - Swing over saddle: 390 mm - Recomended turning diameter : 210 mm - Max. turning diameter : 300 mm - Max. work length : 513 mm Fsdpjx Ecwaefx Ab Tjgk - Bar working diameter : 65 mm - Max. permissible mass (including chuck) : o Chuck work : 150 kg o Shaft work : 300 kg - Base structure o Bed slant angle:30 deg. o Guideway type: Box guide 1.2. MAIN SPINDLE : - Drive mechanism : Belt-drive - Chuck size : 210 mm - Motor power (15 min / cont.) : 18,5 / 15 Kw - Spindle speed : 4.500 rpm 1.3. CARRIAGE : - Travel : o X axis : 230 mm o Z axis : 580 mm o C axis : 360 grade (in 0.001) - Rapid traverse rate : o X axis : 24 m/min o Z axis : 30 m/min o C axis : 200 rot/min - Continuous thrust force : o X axis : 6207 N o Z axis : 11305 N - Intermittent thrust force : o X axis : 9931 N o Z axis : 16958 N - Ballscrew (diameter x lead) : o X axis : 32 x 10 mm o Z axis : 32 x 10 mm - Servo motor: o X axis : 1,8 kW o Z axis : 3,0 kW 1.4. ACCURACY : - Positioning : o X axis : 0,01 mm o Z axis : 0,02 mm o C axis : 0,0167 degrees

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details turning diameter 800 mm turning length 1500 mm control Siemens 840 D swing over bed 1000 mm swing diameter over slide rest 800 mm max. workpiece weight between centres 2000 kg main spindle speeds: 2000 U/min main drive 62 kW transmission ratio 4 milling spindle drive 37 kW milling spindle turning speed range: 25 - 10000 U/min total power requirement 82 kVA weight of the machine ca. 28 t dimensions of the machine ca. 8,2 x 5,3 x 3,6 m Additional information UniCen Series – for large complex components With the Monforts machine tools from the UniCen Series 1000 you can work with large, complex components up to 1500 mm diameter and 1000 mm swing diameter entirely, process capably and cost effectively in one set-up. Great flexibility results from the five interpolating axis. The B axis swivelling drill-mill head with a swivel range of 190 deg. directs the tools to the workpiece in almost every position and every angle. Additionally, the tool head can be loaded fully automatically by 60 tools from a separate chain magazine. Thus, even complex freeform surfaces with high surface finish quality are possible. Advantages > Wear free Monforts Hydrostatic > Optimal vibration damping > Long-term accuracy > Long life and highest machining performance > Complex five axis machining via the B axis swivelling drill-mill head > Turning, drilling, milling and thread-cutting on one machine > Precision ball-screw with preloaded double nut Extensive partial overhaul since November 2023: Fgsdpfsx D U Hwsx Ab Tok - All ball screws including bearings overhauled: X1/X2/Y1/Z1/Z2 - All cylinders overhauled - All Siemens motors overhauled: main spindle, tailstock, magazine, tool 1+2, X/Z/Y/B/C/U/W - Siemens control panel replaced, control module and LT module repaired - Clamping elements/ATC renewed: Ortlieb collet, clamping package incl. pull rod - Tailstock quill renewed - All wipers replaced and covers reworked - Drive belts and safety windows renewed - Various cables renewed * CNC Control SIEMENS 840 D * Swivelling milling head at the top (B axis), interpolating, HSK-A 63 * Y axis * C axis * 8-station turret at the bottom, for driven tools * 60-station tool changer * NC-controlled tailstock, quill diameter 150 mm, max. quill stroke 180 mm * Hydrostatic longitudinal guide in the Z-axis * Coolant system with paper belt filter * Chip conveyor * Oil-cooler, make SCHIMPKE * Extraction system * Power chuck, make FORKARDT, diameter 500 mm

Condition: used, Siemens 828D control 8 “ Maximum turning diameter: 481 mm Maximum turning length: 545 mm Maximum main spindle speed: 4500 rpm Main spindle motor power: 25 kW Number of tool positions: 12 pcs X-axis travel: 260 mm Z-axis travel: 590 mm Machine length: 3415 mm Machine width: 1900 mm Fodpfx Abox D Uxts Tegk Machine height: 1845 mm Machine weight: 6500 kg Team Eye (possibly camera or inspection module) LNS chip conveyor Tool holder package

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, Control Unit Brand OKUMA Model OSP-P300SA Fsdpfxex D Hlle Ab Tegk Main Drive Spindle speed range 38-3800 Tool taper HSK 63 Number of axis 4 Movement Y-Axis Movement 160 mm B-Axis Movement 0.001° Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment HI-Cut Pro high-speed control This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,000 h, Control Unit Brand FANUC Model MSX-701 IV Fgodox D Ixmjpfx Ab Tjk This MORI SEIKI NZ1500 was manufactured in 2010. It features an MSX-701 IV control system, dual spindles with a maximum speed of 6000 rpm, and two turrets with capacities of 16 positions each. The machine includes a bar feeder for materials up to 1200 mm and a high-pressure coolant system with a 500-liter tank. Consider the opportunity to buy this MORI SEIKI NZ1500 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2700 mm Measurements depth 5700 mm Measurements height 2100 mm Machine weight 7950 kg Control Unit Brand SIEMENS Model SINUMERIK 840D solution line with ERGOline control and ShopTurn, operating system Windows Main Drive Spindle speed range 5000 Spindle bore 87 mm Number of axis 5 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Fgodox D S S Depfx Ab Tek Tail Stock Pinol tool taper MT 5 Tools Max weight 7 kg Max tool diameter 80 This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2023, operating hours: 300 h, Main Drive Number of axis 5 Media Chip conveyor Yes Additional Equipment 36 tool change Fjdpfx Ajx D S Npjb Tjgk Includes tailstock function This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, General Data Machine weight 20000 kg Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Spindle speed range 4000 Number of axis 7 Movement X-Axis Movement 550 mm Y-Axis Movement 110 mm Turret Number of turrets 1 Fjdpox D S Dgjfx Ab Tegk Tools Number of index 60 Number of station 12 Max tool length 350 mm Type of tool holder HSK-A63 Additional Equipment Oil mist extraction Coolant tank with belt filter system Internal coolant system with 80 bar pressure Approx. 30 tool holders This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,695 h, Control Unit Brand MAZATROL Model Matrix Movement X-Axis Movement 630 Y-Axis Movement 230 Z-Axis Movement 1585 W-Axis Movement 1546 Additional Equipment Options Screen: Picture available This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm and a turning spindle speed of 2800rpm. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex 400 IV machine we have for sale. Contact us for more information about this machine. Fjdpfsx D Szrex Ab Tsgk Application Types Turning