Knuth Outlet
Knuth Outlet from Wasbek
This dealer has not yet provided a company description.
Mr Rasmus Dohrau
Schmalenbrook 14
24647 Wasbek
Germany
Current offers from similar dealers
Listing
Sonnenbühl
18,638 km
High-speed radial drilling machine
DonauDanumeric 440
DonauDanumeric 440
Call
Condition: good (used), Year of construction: 1998, functionality: fully functional, DONAU DANUMERIC 440, year of manufacture 1998
Lhjdpfx Adsy Txlrjwjg
Technical specifications:
- Table 1800 x 600 mm, 4 T-slots
- Drilling radius 540 – 1590 mm
- Spindle taper SK40
- Speed range 15 – 2800 rpm
- Motor power 5.5 kW
- Weight approx. 2,800 kg
Listing
Bächingen an der Brenz
18,554 km
High-speed radial drilling machine
DONAUDanuport 540
DONAUDanuport 540
Call
Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges
Tool holder: SK 40
Table dimensions: 4000 x 800 mm
Number of T-slots: 6
T-slot spacing: 140 mm
Distance: Spindle lower edge min. 140 mm
Table upper edge max. 740 mm
Boring radius: min. 540 mm
max. 1590 mm
Travel range U-axis: 2600 mm
Travel range Y-axis: 1050 mm
Quill stroke (Z-axis): 200 mm
Column stroke (W-axis): 400 mm
Machining Data
Drilling capacity in steel St 60: 40 mm
Drilling capacity in cast iron GG 22: 50 mm
Thread cutting: St 60: M 36
Thread cutting: GG 22: M 42
Main Spindle Drive
AC motor, frequency-controlled: 5.5 kW at 100% duty cycle
Speed range: 15 - 2800 min-1
Torque: max. 250 Nm
Constant from: 15 - 200 min-1
Feed Drives
X-axis - AC servo motor: 0.25 kW
Y-axis - AC servo motor: 0.25 kW
Z-axis - AC servo motor: 4.50 kW
W-axis - AC servo motor: 2.50 kW
U-axis - AC servo motor: 2.50 kW
Rapid traverse rates (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse rates (U/W): 7.5 / 3 m/min
Feed rates, stepless: 5 - 2000 mm/min
Feed force: 12000 N
Accuracy
Positioning accuracy X, Y-axis on 1200 mm: ± 0.075 mm
Repeatability X, Y-axis: ± 0.03 mm
Positioning accuracy Z-axis: ± 0.05 mm
Repeatability Z-axis: ± 0.03 mm
Positioning accuracy W-axis: ± 0.05 mm
Repeatability W-axis: ± 0.03 mm
Electrical Data
Operating voltage / frequency: 400 / 50 V / Hz
Control voltage: 24 V
Total connected load: 13.0 kVA
CNC Control
Axes: 5 (X, Y, Z, W, U), expandable
Display: TFT flat screen, backlit, easily readable from all sides
Position data: Cartesian or polar, dimension data absolute or incremental
Units: mm or inch, or in degrees
Interpolation: 2 axes (X, Y)
Technology database: Tool management, tool suggestions based on machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subprogram technique: yes
Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking and counterboring, freely programmable cycle for special tools, dwell time possible for each cycle
Chip breaking / chip removal: possible during drilling cycle
Drilling patterns: hole pattern, hole circle, matrix
Basic software: Programming in dialog mode, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- rectangular parts mounted in any way
- round parts mounted in any way
- determination of castings and forgings
- angle detection in round parts by probing reference edges or surfaces
Data interfaces: USB interface
Painting (Repainting)
Standard painting, two-component textured paint
Machine upper part: light gray RAL 7035
Machine lower part: signal blue RAL 5005
Documentation
Operating and programming manual
Electrical circuit diagram
Spare parts drawings
Lodpsy Ttrtofx Adwohg
Test report for mechanics, electrical components and safety devices
Listing
Weißenhorn
18,576 km
High-speed radial drilling machine
DonauDR 32
DonauDR 32
Call
Condition: good (used), Machine type: Donau radial drilling machine DR 32
Year of manufacture: unknown
MK 4 spindle taper
Lhsdpfx Asy Tpq Eedwjg
Spindle speed: 41 – 1800 rpm
Threading device
Coolant pump
Weight: approx. 2500 kg
Drilling capacity in steel: 32 mm
Table size: approx. 1200 x 600 mm
Listing
Sendenhorst
18,469 km
Radial drilling machine, drill, boring mill
MikrosaSRB 35
MikrosaSRB 35
Call
Condition: excellent (used), Rapid radial drilling machine / Radial drilling machine / Drilling machine (used)
Manufacturer: Mikrosa
Year of manufacture: 2001
Type: SRB 35
Drilling capacity:
- Steel: 35 mm
- Cast iron: 40 mm
Thread cutting:
- Steel: M20
- Cast iron: M24
Spindle taper: MK 4
Spindle speed: 20 – 2800 rpm, infinitely variable
Automatic feed: infinitely variable
Spindle stroke: 140 mm
Arm reach: 1000 mm
Table size: 1050 x 400 mm
Column diameter: 200 mm
Installation height: 600 mm
Connected load: 7.8 kW
Space requirement: approx. width 1250 mm, depth 2100 mm, max. height 2700 mm
Weight: approx. 2000 kg
Hydraulic clamping
Thread cutting device
Depth stop
Lateral clamping surface
Drill chuck
2 gearbox stages
Lhodpfx Adoy Skrzewsg
The machine is in very well-maintained condition, runs very smoothly, and is ready for immediate operation. Forklift available, free loading on truck. Affordable shipping possible.
Location of the machine: 48477 Hörstel
Listing
Bächingen an der Brenz
18,554 km
Donau / Althaus PLC card NEW
DonauGetriebeschaltkarte plug and play
DonauGetriebeschaltkarte plug and play
Call
Condition: new, SPS gear shift control card New for old For self-installation or installation by one of our service technicians
Lhjdpfx Adjy Rkkhoweg
Listing
Bächingen an der Brenz
18,554 km
Donau DR, Danuflex, Danumeric
DONAUErsatzteile
DONAUErsatzteile
Call
Condition: new, Spare parts for Donau high-speed radial drilling machines
Ljdpfoy Ri H Isx Adwohg
Donau DR
Donau Danuflex
Donau Danumeric
Donau Danusys
Donauflex
Donaumeric
Listing
Bächingen an der Brenz
18,554 km
Exchange / Overhaul / NEW
DONAUGetriebeschaltkarte SPS Donau / Althaus
DONAUGetriebeschaltkarte SPS Donau / Althaus
Call
Condition: like new (used), Suitable for your Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128
Lodpfx Adey Ri Hnjwshg
Listing
Leipheim
18,564 km
High-speed radial drilling machine
Reparatur / Überholung der Drehzahlplatine DONAUDONAUFLEX / DR
Reparatur / Überholung der Drehzahlplatine DONAUDONAUFLEX / DR
Call
Condition: refurbished (used), Repair of speed control board
Lhedey Rfzuepfx Adweg
Listing
Wiesbaden
18,584 km
High-speed radial drilling machine
DONAUDanumeric 340
DONAUDanumeric 340
Call
Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm
Thread cutting St 60/GG 22: M 36/M 45
Clamping area of the table: 600 x 1800 mm
Height adjustment of the boom: 450 mm
Min./max. drilling radius: 305/1305 mm
Lhodpfjy I Ua Iex Adwog
Spindle taper: SK 40
Quill stroke: 200 mm
Infinitely variable spindle speeds: 15 - 2800 rpm
Infinitely variable feeds: 5 - 2000 mm/min
Spindle drive, frequency controlled: 5.5 kW
Electrical connection: 400 V, 14 kVA
Weight: 3400 kg
Space required: 3800 x 2000 x 2500 mm
Listing
Osterode am Harz
18,356 km
High-speed radial drilling machine
DonauDR 40-Z
DonauDR 40-Z
Call
Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987.
Manufacturer: Donau
Model: DR 40-Z
Lodpfxjy Dn E Nj Adwehg
Serial number: 1146-3
If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment.
This is a used machine, therefore we sell under exclusion of any warranty.
Listing
Velen
18,509 km
Rapid Radial Drilling Machine
DONAUDR 32
DONAUDR 32
Call
Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm
arm length 1230 mm
table surface area 1200 x 500 mm
bore stroke 180 mm
feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm
Lhsdpfjy Aa H Nsx Adwjg
turning speeds 60 - 1800 U/min
taper MK 4
total power requirement 2,7 kW
weight of the machine ca. 1,8 t
dimensions of the machine ca. 2,2 x 1,8 x 2,3 m
Quick radial with:
- Feed
- Thread cutting device
Listing
Schwabach
18,464 km
High-speed radial drilling machine
HKSHKS 32 MG
HKSHKS 32 MG
Call
Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm
Tapping capacity into full M 32 mm
Motor power 1.5 / 3 kW
Tool holder MK 4
Lsdeyzxziopfx Adwshg
Quill stroke 170 mm
Stroke approx. 400 mm
Speeds : Range 1 , infinitely variable from 38 - 192 rpm
Range 2 , infinitely variable from 119 - 596 rpm
Range 3 , infinitely variable from 400 - 2000 rpm
Listing
Bächingen an der Brenz
18,554 km
CNC rapid radial drilling machine
DONAUDanumeric 440
DONAUDanumeric 440
Call
Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification
• Work table 1800 x 600 mm with 4 T-slots
• Traversing arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping device
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servo motor
• 2 T-slots, 18 mm, rear side of machine base
• 2 T-slots, 18 mm, left side of machine base
• Thread cutting unit
• Central lubrication
• Coolant system
• Machine light
• CE marking
• Safety device
• USB interface
Dimensions and Travel Ranges
Tool holder: SK 40
Column diameter: 195 mm
Table dimensions: 1800 x 600 mm
Number of T-slots: 4
Distance between T-slots: 125 mm
Quill travel (Z-axis): 200 mm
Column travel (W-axis): 410 mm
Distance spindle nose – table (min): 70 mm
Distance spindle nose – table (max): 680 mm
Distance spindle nose – floor (min): 970 mm
Distance spindle nose – floor (max): 1580 mm
Drilling radius: 540 – 1590 mm
Working table height: 900 mm
Machining Capacities
Drilling capacity (solid):
St 60: ⌀ 40 mm
GG 22: ⌀ 50 mm
Tapping:
St 60: M36
GG 22: M42
Main Spindle Drive
AC motor, frequency controlled: 5.5 kW at 100% duty cycle
Speed range: 15 – 2800 rpm
Torque: max. 250 Nm
Constant torque from 15 – 2000 rpm
Feed Drives
X-axis - AC servo motor: 0.25 kW
Y-axis - AC servo motor: 0.25 kW
Z-axis - AC servo motor: 4.50 kW
W-axis - AC servo motor: 2.50 kW
Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse (W): 3 m/min
Infinitely variable feeds: 5 – 2000 mm/min
Accuracy
Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm
Electrical Data
Operating voltage/frequency: 400 V / 50 Hz
Control voltage: 24 V
Hydraulic unit for clamping: 0.75 kW
Total connected load: 13.0 kVA
Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg
CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Lhjdpfx Adsyxw Ddowog
Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm
Position indication: Cartesian or polar, absolute or incremental
Measurement units: mm or inch or degrees
Interpolation: 2 axes (X, Y)
Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subprogram function: yes
Machining Cycles
Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions
Zero point determination: cycles for determining reference points by manual probing of the workpiece for:
- Arbitrary clamped rectangular parts
- Arbitrary clamped round parts
- Centering of cast and flame-cut parts
- Angle position detection for round parts by probing reference edges or surfaces
Test graphics: Graphical display of drilling patterns
Listing
Bächingen an der Brenz
18,554 km
High-speed radial drilling machine
DONAUDanumeric 440
DONAUDanumeric 440
Call
Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration
• Work table 1200 x 750 mm with 5 T-slots
• Arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping device
• Infinitely variable spindle speed programming
• Stepless quill feed via three-phase servomotor
• 2 T-slots 18 mm at the rear of the machine base
• 2 T-slots 18 mm on the left side of the machine base
• Thread cutting device
• Central lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety device
Dimensions and Travel Ranges
Tool holder SK 40
Column diameter mm 195
Table size mm 1200 x 750
Number of T-slots 5
Lhedpoyuqmijfx Adwsg
Distance between T-slots mm 125
Quill travel (Z-axis) mm 200
Column travel (W-axis) mm 410
Distance spindle lower edge – table top min mm 70 / max mm 680
Distance spindle lower edge – floor min mm 970 / max mm 1580
Drilling radius mm 540 - 1590
Working table height mm 900
Machining Capacities
Drilling capacity solid St 60 Ø 40
GG 22 Ø 50
Thread cutting St 60 M 36
GG 22 M 42
Main Spindle Drive
AC motor, frequency controlled kW 5.5 @ 100% duty cycle
Speed range: min⁻¹ 15 - 2800
Torque Nm max. 250
Constant from min⁻¹ 15 – 2000
Feed Drives
X-axis AC servo motor kW 0.25
Y-axis AC servo motor kW 0.25
Z-axis AC servo motor kW 4.50
W-axis AC servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5
Rapid traverse speed (W): m/min 3
Feed rate stepless mm/min 5 – 2000
Accuracy
Positioning accuracy X, Y axes
over 1200 mm mm ± 0.075
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0
Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800
CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm
Position indication: Cartesian or polar, values absolute or incremental
Units: mm or inch or in degrees
Interpolation: 2 axes (X, Y)
Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions
Tool management: up to 500 tools
Subroutine technology: yes
Machining Cycles
Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry
Zero point determination: Cycles for zero point determination by manual probing of the workpiece for:
- arbitrarily mounted rectangular parts
- arbitrarily mounted round parts
- alignment of cast and flame-cut parts
- angular position detection for round parts by probing reference edges or surfaces
Test graphic: Graphical display of drilling patterns.
Listing
Friesenheim
18,717 km
High-speed radial drilling machine
DonauDonauflex 135
DonauDonauflex 135
Call
Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine
Manufacturer: Donau
Model: Donauflex 135
Year of manufacture: 2020
Condition: Very good, used but like new
Ljdeyucahspfx Adwohg
Available immediately from stock.
Listing
Welden
18,535 km
High-speed radial drilling machine
DonauDR 23
DonauDR 23
Call
Condition: refurbished (used), functionality: fully functional, table length: 1,200 mm, table width: 500 mm, spindle mount: MK 3, height adjustment type: electric, Donau DR23 Radial Drilling Machine – Robust Quality Machine
For sale is a reliable Donau DR23 radial drilling machine, ideal for workshops, metalworking, or industrial applications. The machine impresses with its sturdy design, high precision, and versatile applications for drilling, countersinking, and thread cutting.
Details:
Manufacturer: Donau
Model: DR23
Radial drilling machine overhauled by Vaumtec
Quick-change chuck
Stable cast construction
Adjustable arm for flexible machining of large workpieces
Suitable for steel, aluminum, and other metals
Forward and reverse rotation
Lhedpfoyrtkxsx Adwog
Listing
Wald
18,661 km
Schnell radial drilling machine drill press
DonauDanumeric 440
DonauDanumeric 440
Call
Condition: ready for operation (used), Donau Danumeric 440 Radial Drilling Machine
Drilling capacity (steel): Ø 40 mm
Lhsdpfxjyrdc Ss Adwsg
Thread cutting: up to approx. M36 (depending on material)
Tool holder: SK 40
Spindle speed: approx. 15 – 2,800 rpm (infinitely variable)
Feed: infinitely variable approx. 5 – 2,000 mm/min
Quill stroke (Z): 200 mm
Column stroke (W): 410 mm
Arm traverse: 1,050 mm
Drilling radius: approx. 540 – 1,290 mm
Arm swivel range: approx. 330°
Column diameter: 195 mm
You are welcome to arrange a viewing.
We can also organize affordable shipping for you!
You will receive a proper invoice.
For international customers, a net invoice can be issued (a valid VAT ID number is required).
Interim sale reserved.
Visit our shop and take a look at our other offers.
All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only.
Technical data may vary and errors in the item description are reserved.
Listing
Bächingen an der Brenz
18,554 km
High-speed radial drilling machine
DONAUDanuflex 145
DONAUDanuflex 145
Call
Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots
• Arm travel 1050 mm
• Drill spindle Morse taper 4
• Infinitely variable speed control
• Infinitely variable quill feed
• Thread cutting device
• 2 T-slots (18 mm) each, machine base rear and left
• Machine lamp
• Central lubrication
• Table surface machined on all sides
• Safety guard on drill
• Coolant system
Dimensions and Travel
Tool holder MT 4
Lhsdpfoynt Ucsx Adwog
Column diameter mm 195
Table dimensions mm 1200 x 750
Number of T-slots 5
T-slot spacing mm 125
Quill stroke mm 220
Column stroke mm 450
Distance spindle nose to table
min. mm 40
max. mm 710
Distance spindle nose to base plate
min. mm 840
max. mm 1510
Drilling radius
min. mm 540
max. mm 1590
Working table height mm 900
Machining Data
Drilling capacity solid material St 60 Ø 45 mm
GG 22 Ø 55 mm
Thread cutting St 60 M 36
GG 22 M 45
Main Spindle Drive
AC motor, frequency-controlled kW 5.5 at 100% duty cycle
Speed range rpm 15 - 2800
Torque Nm max. 250
Constant from rpm 15 - 200
Feed Drives
Feed, stepless mm/rev 0.02 - 0.7
Feed force N 12,000
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Total connected load kVA 9.3
Weight DANUFLEX 145 (without packaging)
with 750 x 1200 mm table kg 2,600
Documentation
Operating manual, incl.
Lubrication and hydraulic diagram
Electrical schematic
Listing
Bächingen an der Brenz
18,554 km
High-speed radial drilling machine
DONAUDanuflex 145
DONAUDanuflex 145
Call
Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots
• Arm travel 1050 mm
• Drill spindle Morse taper 4
• Infinitely variable speed control
• Infinitely variable quill feed
• Thread cutting device
• 2 T-slots (18 mm) each, machine base rear and left
• Machine lamp
• Central lubrication
• Table surface machined on all sides
• Safety guard on drill
• Coolant system
Dimensions and Travel
Tool holder MT 4
Column diameter mm 195
Table dimensions mm 1200 x 750
Number of T-slots 5
T-slot spacing mm 125
Quill stroke mm 220
Column stroke mm 450
Distance spindle nose to table
min. mm 40
max. mm 710
Distance spindle nose to base plate
min. mm 840
max. mm 1510
Drilling radius
min. mm 540
max. mm 1590
Working table height mm 900
Machining Data
Drilling capacity solid material St 60 Ø 45 mm
GG 22 Ø 55 mm
Thread cutting St 60 M 36
GG 22 M 45
Main Spindle Drive
AC motor, frequency-controlled kW 5.5 at 100% duty cycle
Speed range rpm 15 - 2800
Torque Nm max. 250
Constant from rpm 15 - 200
Feed Drives
Feed, stepless mm/rev 0.02 - 0.7
Feed force N 12,000
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Total connected load kVA 9.3
Weight DANUFLEX 145 (without packaging)
Lhjdpsylnpijfx Adwjg
with 750 x 1200 mm table kg 2,600
Documentation
Operating manual, incl.
Lubrication and hydraulic diagram
Electrical schematic
Listing
Bächingen an der Brenz
18,554 km
High-speed radial drilling machine
DONAUDanuflex 145
DONAUDanuflex 145
Call
Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots
• Arm travel 1050 mm
• Drill spindle Morse taper 4
• Infinitely variable speed control
• Infinitely variable quill feed
• Thread cutting device
• 2 T-slots (18 mm) each, machine base rear and left
• Machine lamp
• Central lubrication
• Table surface machined on all sides
• Safety guard on drill
• Coolant system
Dimensions and Travel
Tool holder MT 4
Column diameter mm 195
Table dimensions mm 1200 x 750
Number of T-slots 5
T-slot spacing mm 125
Quill stroke mm 220
Column stroke mm 450
Distance spindle nose to table
min. mm 40
max. mm 710
Distance spindle nose to base plate
min. mm 840
max. mm 1510
Drilling radius
min. mm 540
max. mm 1590
Working table height mm 900
Machining Data
Drilling capacity solid material St 60 Ø 45 mm
GG 22 Ø 55 mm
Thread cutting St 60 M 36
GG 22 M 45
Main Spindle Drive
AC motor, frequency-controlled kW 5.5 at 100% duty cycle
Speed range rpm 15 - 2800
Torque Nm max. 250
Constant from rpm 15 - 200
Feed Drives
Feed, stepless mm/rev 0.02 - 0.7
Feed force N 12,000
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Total connected load kVA 9.3
Weight DANUFLEX 145 (without packaging)
with 750 x 1200 mm table kg 2,600
Lhedpfx Asyhdvkodwjg
Documentation
Operating manual, incl.
Lubrication and hydraulic diagram
Electrical schematic
Listing
Velen
18,508 km
Rapid Radial Drilling Machine
WEYRAUCHSW 32G
WEYRAUCHSW 32G
Call
Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm
arm length 950 mm
turning speed range 51 - 1000 U/min
turning speeds steps 12
bore spindles - Morse Taper MK 4
quill stroke 160 mm
feed range 0,075 x 0,3 mm/min
table surface area 1200 x 510 mm
total power requirement 2 kW
weight of the machine ca. 1,9 t
Lhsdpfoyfwzbex Adwsg
dimensions of the machine ca. 1,8 x 1,2 x 2,25 m
High-speed radial end mill with
- Thread cutting attachment
- Vertical table 750 x 620 mm
- Horizontal table 1200 x 510 mm
- Emergency stop device
- Documentation
Machine-No. 445
Listing
Bächingen an der Brenz
18,554 km
High-speed radial drilling machine
DONAUDanuflex 145 Digital
DONAUDanuflex 145 Digital
Call
Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots
• Arm travel 1050 mm
• Drill spindle Morse taper 4 (MK 4)
• Infinitely variable speed control
• Infinitely variable quill feed
• Thread cutting attachment
• Two 18 mm T-slots each on rear and left of machine base
• 3-axis digital readout
• Machine lamp
• Central lubrication
• Table top machined all around
• Drill guard
• Coolant system
Dimensions and Travels
Tool holder MK 4
Column diameter mm 195
Table size mm 1200 x 750
Number of T-slots 5
T-slot spacing mm 125
Quill stroke mm 220
Column travel mm 450
Distance spindle nose - table top min 40 mm, max 710 mm
Distance spindle nose - base plate min 840 mm, max 1510 mm
Lsdpfox Uwpxox Adwshg
Drilling radius min 540 mm, max 1590 mm
Work table height mm 900
Machining Capacities
Drilling capacity (solid) St 60 ⌀ 45 mm
GG 22 ⌀ 55 mm
Tapping
St 60 M 36
GG 22 M 45
Main Spindle Drive
AC motor, frequency controlled kW 5.5 at 100% duty cycle
Speed range min⁻¹ 15 – 2,800
Torque Nm max. 250
Constant from min⁻¹ 15 – 200
Feed Drives
Feed, stepless mm/rev 0.02 – 0.7
Feed force N 12,000
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Total connected load kVA 9.3
Weight DANUFLEX 145 (without packaging)
with table 750 x 1200 mm kg 2,600
Documentation
Operating manual, incl.
Lubrication and hydraulic system diagram
Electrical wiring diagram
Listing
Bächingen an der Brenz
18,554 km
High-speed radial drill
DONAUDR 32
DONAUDR 32
Call
Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm
Arm travel 600mm
Tool holder MK 4
Drilling capacity 32mm in steel
Thread cutting device
Coolant system
Lodpfx Asx N Ih Ijdwehg
Safety device at the drill
Completely overhauled in 2026
Listing
Bächingen an der Brenz
18,554 km
High-speed radial drilling machine
DONAUDR 40 Z
DONAUDR 40 Z
Call
Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm
Arm travel 600mm
Lodpex N Iftefx Adwjhg
Tool holder MK 4
Drilling capacity 40mm in steel
Thread cutting device
Coolant system
Documentation
Listing
Weiterstadt
18,574 km
High-speed radial drill
DonauDR 32
DonauDR 32
Call
Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32
Speed: 60 - 1800 rpm
Lhsdpfx Adox Hgkvjwsg
Arm reach: 600 mm
Base plate: 100 x 1400 x 110 mm
Thread cutting device
Coolant system
Machine lamp
Quick-change holder with inserts
Machine vice












































































































































