C Dugard Limited

Condition: used, Year of construction: 2013, turning length: 750 mm, turning diameter: 320 mm, spindle speed (max.): 4,000 rpm, overall weight: 2,500 kg, controller manufacturer: HEIDENHAIN, number of spindles: 1, CONTROLS .. NC controls HEIDENHAIN BASIC FUNCTIONS .. number of spindles: 1 WORKING RANGE TURNING .. swing diameter (max): 320 mm .. turning diameter (max): 150 mm .. worpiece length max.: 750 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 16 kW TAILSTOCK .. sleeve diameter: 60 mm .. taper: MK 4 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 2500 kg Lsdpfxjxqw Nbs Af Eeru ATTACHMENTS (TURNING) .. European CE standards: yes 6000 Hours

Condition: good (used), Year of construction: 2006, functionality: fully functional, TECHNICAL DATA Y-axis: present, milling operations C-axis: present on both spindles Lrsdpexqg U Hefx Af Eju Main spindle speed: max. 6,000 rpm Max. turning diameter: approx. 160 mm Max. turning length: approx. 200 mm Turret: 12 positions, supports driven tools MACHINE DETAILS Control: FANUC Series 21i-TB Electrical data Voltage: AC200/200-220V ±5% Frequency: 50/60 Hz ±1Hz Phases: 3 Power input: 26 kVA Total power: 21 kW Control circuit: AC100V DC24V Dimensions & weight Dimensions (L × W × H): approx. 2,300 × 1,600 × 1,900 mm Weight: 2,270 kg Operating hours Cutting hours: 41,448 h Note: Extensive accessories included in the delivery.

Condition: good (used), Year of construction: 2003, functionality: fully functional, TECHNICAL DATA Ljdpoxqg S Sefx Af Eoru Max. turning diameter: approx. 120 mm Max. turning length: approx. 120 – 150 mm Spindle speed: max. 6,000 rpm Y-axis: available Turret: 12 positions, often with live tooling Main spindle motor power: approx. 5.5 – 7.5 kW Driven tool motor power: approx. 2.2 kW MACHINE PARAMETERS Control system: FANUC Series 21i-TB Voltage: AC200/200–220 V ±5% Frequency: 50/60 Hz ±1 Hz Phase: 3 Connected load: 25 kVA Total power: 19 kW Spindle motor: SP1 – 5.5/7.5 kW Control circuits: AC100 V, DC24 V Dimensions & Weight Dimensions (L × W × H): approx. 2,200 × 1,500 × 1,800 mm Weight: 4,000 kg Operating Hours Machining hours: 28,129 h Power-on hours: 84,037 h Note: Extensive accessories are included in the delivery.

Condition: not inspected (used), Year of construction: 1996, operating hours: 46,282 h, functionality: unexamined, machine/vehicle number: 18770, controller model: TX 8F, clamping diameter: 65 mm, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20.11.2025! Bidding obligates the buyer to collect within the collection period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s Positioning unit X/Z: 0.001 mm Positioning unit C-axis: 0.001° Fine interpolation increment: 0.34 ms Max. thread pitch: 999,999 mm Max. radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 min Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Thrust at 100% duty cycle: 6,000 N Travel distance: 520 mm Ball screw size (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Spindle speed override: 50 – 120% MACHINE DETAILS Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal current: 85 A Connection rating: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% System hydraulic pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M-codes: 3 digits B-codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Lrodpsxpgl Asfx Af Eeu Two 10-station tool turrets with driven tool stations HAINBUCH chuck system Counter spindle Bar feeder from STAMAG Chip conveyor

Condition: used, Year of construction: 2007, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2007 Control : Mitsubishi TX-8i Turning length : 50 mm Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:12 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Lsdpfxoxnu S Is Af Esru Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X2/Z2:35/37,5 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Rear attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder Further Equipment:Rinsing pistol

Condition: used, Used lathe by Wagner Lredpfoxnqcvsx Af Eju Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing over carriage: 280 mm Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of turret positions: 1 Multifix "C" Tailstock: Yes, MK 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system - Basic holder - 3-jaw chuck - Various PARAT tool holders

Condition: good (used), Year of construction: 2008, operating hours: 52,000 h, machine/vehicle number: 1060142, turning diameter: 50 mm, spindle speed (min.): 6,000 rpm, overall weight: 4,500 kg, Equipment: documentation/manual, Front-facing twin-spindle, twin-turret lathe for machining billets or cold-forged blanks, equipped with: - 2 Hainburgh collet chucks type BZI32 - conveyor belt for feeding parts + inclined unloading table Lrsdpfx Afjxnmtqj Eou - chip conveyor with auger - robot with 2 grippers - workpiece turning station for machining on both sides

Condition: good (used), Year of construction: 2006, operating hours: 51,000 h, functionality: fully functional, machine/vehicle number: M102006, turning diameter: 51 mm, spindle bore: 52 mm, spindle speed (min.): 6,000 rpm, spindle motor power: 8 W, rotational speed (max.): 6,000 rpm, overall weight: 5,650 kg, bar diameter (max.): 51 mm, Equipment: documentation/manual, Equipment: - chip conveyor - interface for bar feeder - separator for soluble oil - optional: integrated Fanuc M10A robot for loading/unloading Lsdpfoxnh Tlox Af Eoru

Condition: excellent (used), Year of construction: 2008, operating hours: 4,400 h, functionality: fully functional, Controller Fanuc 0i-TD Swing diameter over bed 400 mm Max. turning diameter D80 mm Max. turning length 220 mm Spindle bore of main spindle D26 mm Spindle bore of counter spindle D26 mm Speed ​​range with main spindle 100 - 6000 rpm Speed ​​range with counter spindle 100 - 6000 rpm Turret 8-fold X travel 80 mm Z travel 280 mm A travel (counter spindle) 220 mm X/Z rapid traverses 1200 mm/min Power of the main spindle 2.5 kW Power of the counter spindle 1.5 kW Max power required 5 kVA / 400V Weight cca.. 1600 kg Lsdpfx Ajxmkg Ssf Ejru Dimensions LxWxH = 2000 x 1200 x 1700 mm Accessories, features - There are collet chucks both on main- and sub-spindles - Spare tool holders (in Z axis the machine can work in two directions at the same time) - Automatic lubrication system - Cooling water equipment - Machine lamp - Bar feeder interface - Machine documentation on hungarian The machine is in very good condition. Ready for immediate use. Under power in Hungary.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 674 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar diameter (max.): 42 mm, TECHNICAL DETAILS MAIN SPINDLE Max. bar diameter: 42 mm Travel: 100 mm Spindle speed: 6,000 rpm Spindle drive power: 7.5/5.5 kW Minimum C-axis resolution: 0.001 degrees SUB SPINDLE Lsdpfxjxlfu Ue Af Eoru Max. bar diameter: 34 mm Spindle speed: 5,000 rpm Spindle drive power: 5.5/3.7 kW Minimum C-axis resolution: 0.001 degrees Number of turrets: 2 UPPER TURRET Number of positions: 8 Travel X: 140 mm Travel Z: 235 mm Travel Y: 70 (+/-35) mm Driven tools speed: 5,000 rpm Driven tools power: 1.0 kW LOWER TURRET Number of positions: 6 Travel X/Z: 140 / 310 mm Number of spindles: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,220 x 1,460 x 1,700 mm Machine weight: 3,100 kg ELECTRICAL SUPPLY Total connected load: 30 kVA Operating Hours Machining hours: 674 h Control on hours: 4,953 h

Condition: used, Year of construction: 2003, controller manufacturer: Mitsubishi, controller model: TX-8H, _____ Description: Year of manuf. : 2003 Control : Mitsubishi TX-8H Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:5.600 rpm Power:18,5 kW Torque:170 Nm Barcapacity:42 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 42 Subspindle: Technology:Belt-driven spindle Speed:5.600 rpm Lredpfx Afjxiukmj Esu Power:11 kW Torque:150 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop mini Axfix Gr. 42 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 12,4 Nm Movement in X/Y/Z:140/70/450 mm Rapid travers in X/Y/Z:15/6/30 m/min Toolcarrier II (X/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 12,4 Nm Movement in X/Y/Z:140/450 mm Rapid travers in X/Y/Z:15/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling unit with Paperbeltfilter Rawmaterialfeed:Barlaoder, FMB SL80S Finished part removal:Interface hydraulic part catcher with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. Toolholder

Condition: used, Year of construction: 2004, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2004 Control : Mitsubishi TX-8i Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:18,5 kW Torque:230 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Subspindle: Ledpfxjxhbfno Af Eeru Technology:Belt-driven spindle Speed:4.000 rpm Power:11 kW Torque:210 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Ejector:Hydraulic with flush Movement in Z:520 mm Rapid travers in Z:30 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/70/450 mm Rapid travers in X/Y/Z:15/6/30 m/min Toolcarrier II (X/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/450 mm Rapid travers in X/Y/Z:15/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling unit with Paperbeltfilter Rawmaterialfeed:Barlaoder, FMB SL80S Finished part removal:Hydraulic part catcher with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. Toolholder, Rinsing pistol

Condition: ready for operation (used), Year of construction: 1996, Make: SPINNER Type of machine: TC 65 Year of manufacture: 1996 Control system: Siemens 820 T Lsdjxg Td Hopfx Af Eeru Machine's weight: 4,5 t Tool holder: VDI 20 x-travel: 200mm z-travel: 500mm Speed range: 4000 1/min Overall dimensions: 1,7 x 2,2 x 1,7 m Tool turret - slots: 16 Pl. C-axis: 0,001 Grad Spindle opening: 65 mm

Condition: good (used), machine/vehicle number: 8607719 / 8412427, Equipment: rotational speed infinitely variable, 2x OZAKI lathes - 1x in working order; OSL-III 8607719 - 1x defective (for spare parts); OSL-III No. 8412427 Ljdpfx Afoxg R Nye Esru

Condition: good (used), Year of construction: 1999, functionality: fully functional, Two machines of the same type available immediately ex production! (Please state your offer price) Sales only within Europe, including Turkey. Price excludes packaging; delivery term: FCA (machine location) ===== For technical data, please refer to the handout. All warranty rights excluded. We do not guarantee the accuracy of the technical data or year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements as stipulated in accident prevention regulations. No sales to private individuals. Lrodpfx Ajxg Rqqef Eeu

Condition: used, Year of construction: 2015, control Siemens mit ShopTurn Swing diameter over bed 470 mm turning diameter 196 mm turning length 444 mm Feed size 200 mm spindle bore 62 mm bar passage 52 mm spindle tunring speed 4.500 U/min z-travel 520 mm x-travel 161 mm rapid traverse (x/z) 30 m/min number of tool places 12 Pos. Number of working hours ca. 14.287 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Parts catcher - Chip conveyor - C axis - Various fixed and driven tool holders Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Ljdpjxgu Rhjfx Af Ejru Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2022, operating hours: 11,543 h, functionality: fully functional, machine/vehicle number: 8107000628B, CNC lathe SPRINT 32 - 8, year 2022, with IEMCA bar feeder CNC control: Fanuc 32i-B Main spindle: Max spindle bore: 32 mm Max spindle speed: 8,500 rpm Power: 7.5/5.5 kW Sub spindle: Max spindle bore: 32 mm Lsdpoxfq I Hsfx Af Ejru Max speed: 8,500 rpm Power: 3.7/2.2 kW Travel axes: X1 70mm, Y1 405mm, Z1 100mm, X2 300mm, Z2 200mm, Y2 135mm Tool holders: Slide 1: 4 x internal machining, 6 x external machining, 4 x driven tools Slide 2: 4 x internal machining, 4 x driven tools Total power requirement: 16 kVA Dimensions (L x W x H): 2,309 x 1,448 x 2,087 mm Weight: 3,450 kg

Condition: used, Year of construction: 2005, operating hours: 39,767 h, functionality: fully functional, machine/vehicle number: 07300002141, spindle bore: 65 mm, Equipment: documentation/manual, DMG Gildemeister TWIN 65 + bar loader IEMCA Master 880 MP + 3 front-driven tools + 4 90° radial tools Lrodoxdb Dpopfx Af Eju Machine is in production until Jan 2026 MAIN MAINTENANCE PERFORMED X2 and Z2 axis guides - 2023 2 turrets - 2022 & 2024 2 drives - 2024 Bar feeder - 2024 Only reason for sale: switching to a lathe with Y axis.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 42999, spindle bore: 80 mm, turning diameter over bed slide: 50 mm, center width: 1,500 mm, controller manufacturer: Fanuc, empty load weight: 3,900 kg, TECHNICAL DETAILS Max. swing diameter: 50 mm Centre distance: 1,500 mm Lsdsxdahaspfx Af Ejru Spindle bore: 80 mm MACHINE DETAILS CNC manufacturer: Fanuc Machine weight: approx. 3,900 kg EQUIPMENT 6-position tool changer

Condition: used, Year of construction: 2002, Manufacturer: Boley, Model BC 42 Year: 2002 Mitsubishi M6 3 axes (X, Z1 & Z2) Main and counter spindle 12-position turret VDI20 Irco bar feeder Weight: approx. 3,500 kg Condition: Main spindle bearings need to be replaced Accessories: Numerous VDI20 tool holders Ledpfx Asxbzhiof Ejru

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm Lrsdpfxexbtq No Af Eju control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: used, Year of construction: 2003, max. bar material dia. 65 mm max. bar length 3.000 mm Lrodpfx Aoxbtp Eef Esu control System TX 8H CNC lathe | TRAUB - TNC 65 equipped with bar loader . The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, Frame saw for solid material. Strokes per minute: 70–160. Lsdpfx Afexbnzie Eeru

Condition: good (used), Year of construction: 2005, - Max. bar diameter: 42 mm - Max. spindle speed: 5,000 rpm - 1x cross slide - 2x vertical slides - Star turret with 8 stations (including pick-off position) - All stations driven (max. 6,000 rpm) Lrsdpfx Aexa Evhsf Eju - Standard tool holder: VDI 25 - C-axis - Pick-off chuck (max. 4,000 rpm) - Back machining: 3 stations - Control: GE Fanuc 18i-TB - Weight: 2,700 kg Dimensions LxWxH: 2200 x 1270 x 1580 mm Accessories: IEMCA bar feeder BOSS 332/32 E (Max. bar diameter 35 mm with corresponding channel)

Condition: used, Year of construction: 2005, functionality: unexamined, Miyano BND-51SY CNC lathe Serial no: 2WX85413 (02/2005) with Fanuc Series 18i-TB control Iemca Kid 70 bar feed Serial no: 0205120A01 (2005) Lrjdpfxsw U U Iws Af Esu