Eifel Logistics GmbH

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance Gusdpfx Asz R T E Eof Tjh • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Gsdpfoz R T Akox Af Tsuh

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm Gujdpfez Rygnox Af Tsh -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox Gusdpfx Aoz Rqcmjf Tjh acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: Godpfx Aez Nhinjf Tsuh • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, total height: 3,100 mm, total width: 1,600 mm, total length: 1,700 mm, overall weight: 2,500 kg, PC800 Plastic Crusher The PC800 industrial plastic crusher is designed for size reduction of HDPE, LDPE and PP film waste. It can be used as a standalone machine or integrated into plastic washing and recycling lines. Crushing can be performed with water supplied directly into the crushing chamber, allowing the material to be crushed and pre-washed at the same time. The bearing units are located outside the crushing chamber, protecting the bearings from direct contact with water and allowing the crusher to be used for wet crushing applications. Hydraulic Hopper Opening System: The crusher is equipped with a hydraulic power unit and two hydraulic cylinders for lifting and lowering the feed hopper, providing convenient access to the crushing chamber for cleaning, maintenance and knife replacement. Material Feeding Conveyor: The crusher is equipped with a belt conveyor for feeding material directly into the feed hopper, providing continuous and convenient material loading Crushed Material Collection Hopper: The system is equipped with an 800-liter collection hopper for crushed material, mounted on a robust steel support frame Technical Specifications • Capacity: 250–500 kg/h depending on the material • Main Motor Power: 37 kW • Hydraulic System: Hydraulic power unit with 2 cylinders for lifting and lowering the feed hopper • Hydraulic Power Unit Motor: 1.5 kW • Cyclon power: 5.5 kW • Rotor Diameter: 500 mm • Rotor width: 800 mm • Crushing room dimension: 620 × 840 mm • Rotating Knives: 10 pcs • Fixed Knives: 4 pcs • Knife Material: SKD11 • Water Inlet Diameter: 25 mm • Screens Included: 28 mm Gjdpfx Afsz I Tb Ss Teuh • Machine Material: S235 steel • Crusher Body Thickness: 25 mm • Dimensions (L × W × H): 1700 × 1600 × 3100 mm • Crushing Type: Dry or wet crushing with water supply • Material Feeding: Belt conveyor • Conveyor Motor Power: 1.5 kW • Conveyor Length: 4000 mm • Belt Width: 600 mm • Conveyor Capacity: up to 800 kg/h • Speed Control: Manual • Conveyor Height: Adjustable • Belt Material: PVC • Total weight: 2500 kg • Collection Hopper Capacity: 800 L stainless steel • Application: Collection of crushed material • Support Structure: Steel frame Applications: HDPE, LDPE and PP film, packaging film and other flexible plastic waste

Condition: used, Year of construction: 2006, RAPID GK6090-KU Plastic Granulator – 75 kW Industrial knife granulator manufactured by RAPID GRANULATOR AB, Sweden, in 2006. Equipped with a 75 kW main motor and a V-cut rotor with five rows of rotating knives arranged in a V configuration. Technical specifications: Gjdez Hmqkjpfx Af Tsuh Manufacturer: RAPID GRANULATOR AB Model: GK6090-KU Year of manufacture: 2006 Serial number: 81725.001 Main motor power: 75 kW Rotor diameter: 600 mm Rotor width: 900 mm Cutting system: V-cut Rotating knives: 5 rows arranged in a V configuration Power supply: 400 V, three-phase, 50 Hz CE marking + includes Blower

Condition: good (used), Year of construction: 2014, functionality: fully functional, Roll cutter RGS50 - Used machine - Good condition - ready for immediate use Partially refurbished: Hydraulic hoses replaced Hydraulic oil changed Safety valves retrofitted Control system refurbished Blade holder renewed Knives renewed Knife length 2500mm Max. opening 1600mm V-table design Drive power: 15kW with soft start Double pump with 2-stage cutting speed Guedjz E Hnyopfx Af Toh Two-hand operation Cable pull emergency stop on both sides Base frame and feed table available

Condition: used, Year of construction: 2021, operating hours: 550 h, USED GUIDETTI SINCRO MILL 315 CABLE RECYCLING LINE – 2021 Guedpfx Afez D I Sqs Toh For sale: a used, compact cable recycling line manufactured by the renowned Italian company Guidetti Recycling Systems. The SINCRO MILL 315 is designed for processing mixed electrical cables, including both rigid and flexible copper or aluminum cables, without the need for preliminary sorting. Despite its compact design, the machine integrates the complete recycling process into a single system: * blade granulator, * zig-zag separator, * refining turbine, * dry density separation table. Rigid metal fractions, plugs, and connectors are separated directly by the zig-zag system, while plastics and thinner wires are further processed in the refining turbine. This solution improves separation quality and minimizes metal losses in the plastic fraction. The line produces clean copper or aluminum granulate and a separated plastic fraction. According to the manufacturer, the purity of the recovered materials can reach up to 99%, depending on the type and condition of the input cable. TECHNICAL DATA Manufacturer: Guidetti Recycling Systems Model: SINCRO 315 MILL Year of manufacture: 2021 Serial number: S315M210077 Operating hours: just over 500 hours Production capacity: approximately 130–180 kg/h, depending on the input material Installed power: 21 kW (according to the machine nameplate) Power supply: 400 V / 50 Hz / 3P+PE Full-load current: 37 A Dimensions: approximately 2316 × 1475 × 3100 mm Weight: 1,200 kg CE marked: Yes MAIN ADVANTAGES * complete cable recycling process integrated into one compact machine, * suitable for mixed rigid and flexible cables, * processing of copper and aluminum cables, * no preliminary cable sorting required, * high-quality separation of metals and plastics, * low operating hours, * compact footprint, * relatively low energy consumption, * easy operation and maintenance, * Italian manufacture. CONDITION The machine is used and has only slightly more than 500 operating hours. It is offered as a complete, integrated cable recycling unit.

Condition: used, Maschinenfabrik Liezen Industrial Impact Crusher, Blow Bar Crusher, 22 kW, Used machine Manufacturer: Maschinenfabrik Liezen G.m.b.H. Type: CI 85-60 F Serial number (Masch. Nr.): 92 117 20 Electric motor manufacturer, power: Siemens, 22 kW (1460 RPM, 400V) Condition: Used, industrial execution Godpfez D Hb Rsx Af Teuh Overall dimensions(crusher): 2300 x 1600 x 2000 mm Installation dimensions: 3430 x 1540 x 1900 mm Motor dimensions: 1000 x 1000 x 620 mm Feed opening size: 620 x 320 mm Technical and operating parameters: Crusher rotor design: 3 pcs impact bars (blow bars) Drive: 22 kW Siemens three-phase electric motor (141 kg) Execution: Heavy-duty construction with wear-resistant internal lining plates

Condition: new, Year of construction: 2026, Complete set of jaws for Metso LT95 / C95 – large tooth, new type This advertisement concerns a complete set of crushing jaws for the Metso LT95 / C95 crusher. The jaws have a profile with a large tooth and are made according to a new design. The set includes: - Fixed jaw – weight 868 kg. - Moving jaw – weight 710 kg. Material composition: 18% manganese, 2% chromium, and the rest is iron. Price for the complete set, EXW Poland. We can arrange shipping worldwide. Guodpfx Ajz Duv Nsf Teh Our offer also includes other spare parts and consumables: wedges, side plates (cheek plates), toggle plates, toggle plate housings, wear rings, distribution plates, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC, and BOWEX couplings, linings, grizzly grates, and many other components for routine repairs and major overhauls of these machines. Only with us is the chemical composition of the castings confirmed by a QUALITY CERTIFICATE and spectrographic analysis. Do not buy cheaper, lower-quality castings – too low a manganese or chromium content can reduce the lifespan of the jaws by up to half! We offer the widest range of spare parts for crushers and screeners in Poland – for both stationary and mobile machines. We offer parts for machines from brands such as: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab, and others.

Condition: new, Year of construction: 2026, Jaw plate set for Metso LT95 / C95 — large tooth, new type This listing is for a complete set of jaw plates for the Metso LT95 / C95 jaw crusher. The jaw plates feature a large-tooth profile and are manufactured in the new design. The set consists of: Fixed jaw plate — weight 868 kg. Swing jaw plate — weight 710 kg. Material composition: 18% manganese, 2% chromium, balance iron. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Gsdpfxoz Durkj Af Tsuh Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, SUPERTOOTH jaw plate set for Pegson XA400S / XR400S and Powerscreen 400 / R400 This listing is for a complete set of SUPERTOOTH-profile jaw plates. The set is suitable for the following jaw crusher models: Gedpfx Afsz Dudye Tsuh Pegson XA400S Pegson XR400S Powerscreen 400 Powerscreen R400 The set consists of: Fixed jaw plate — part number CR005-068-001C, weight 1000 kg. Swing jaw plate — part number CR005-067-001C, weight 1100 kg. Material composition: 18% manganese, 2% chromium, balance iron. The chemical composition has been verified using a spectrometer. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: good (used), Cable stripping machine, cable stripper, cable peeler, cable stripping machine, cable insulation machine, cable recycling plant -Manufacturer: Yngves MEKANISKA AB, cable stripper cable peeler Gsdpfx Afoz Dua Io Tsuh -Type: K74-1 -Motor: ABB 2.2 kW -Dimensions: 1600/1200/H1600 mm -Weight: 314 kg

Condition: new, Year of construction: 2026, We offer a complete set of SUPERTOOTH jaw plates for Powerscreen Premiertrak 300 and Powerscreen Premiertrak 330 jaw crushers. Fixed jaw plate — part no. CW017-002-MN180, dimensions 1300 × 973 mm, weight 656 kg, material composition 18% Mn / 2% Cr. Guedpez Dt Tysfx Af Tjh Swing jaw plate — part no. CW017-001-MN180, dimensions 1339 × 963 mm, weight 669 kg, material composition 18% Mn / 2% Cr. Other jaw plate and liner versions are available on request. The parts can also be manufactured from an alloy containing 22% Mn / 2% Cr. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 50,000 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 130-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Gusdpfx Afjz A Dldo Tjh Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, rotor diameter: 1,000 mm, rotor width: 1,600 mm, Cutting mill, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 160 kW Guodpfoz Atqlex Af Teh Hopper: Conveyor belt hopper with forced feed via screw conveyor Working width: 1600 mm Rotor diameter: 1000 mm New machine, in stock.

Condition: used, RETSCH Ultra Centrifugal Mill / Laboratory Mill / Fine Grinding RETSCH ZM 200 Ultra Centrifugal Mill incl. DR 100 dosing unit and extensive accessories For sale is a used ultra centrifugal mill from the manufacturer RETSCH, including a DR 100 dosing unit and extensive accessories as shown in the pictures. The ZM 200 is suitable for rapid fine grinding of various materials and for use in laboratories, research, development, and quality control. Technical data ZM 200: Manufacturer: RETSCH GmbH Type: ZM 200 Equipment type: Ultra Centrifugal Mill Power connection: 1~ 200–240 V Frequency: 50/60 Hz Power according to nameplate: 1100 W Current consumption: 12 A Dimensions (L × W × H): approx. 515 × 410 × 365 mm CE marking Dosing unit: RETSCH DR 100 Dosing unit for controlled material feed with adjustable dosing speed Interfaces ZM 200: Connection for DR 100 RS232 RS485 Equipment: RETSCH ZM 200 Ultra Centrifugal Mill RETSCH DR 100 dosing unit Digital control and display panel Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts in various designs Several hoppers and stainless steel parts Further extensive original RETSCH accessories as shown in the pictures Application areas: Laboratory and research Fine grinding Sample preparation Godpfx Ajzxqhysf Teuh Material testing Quality control Research and development Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 dosing unit 1 × Operating manual ZM 200 1 × Operating manual DR 100 Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts Various hoppers, containers and accessories Further accessories as shown in the pictures Weight approx. 45 kg Condition: Used Signs of wear The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer further questions by telephone.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Drive: electro-hydraulic, electric motor 200 kW, Hydraulic unit with control cabinet and operator panel, 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Gujdpfszv U Ifox Af Toh Discharge conveyor belt recently replaced.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,000 mm, total width: 1,100 mm, total length: 1,900 mm, overall weight: 980 kg, rotor diameter: 260 mm, type of input current: three-phase, rotor length: 600 mm, sieve perforation: 10 mm, input voltage: 380 V, The PC-800,PC-600 and PC-400 Plastic Crusher is a heavy-duty rotor knife granulator designed for efficient recycling of thermoplastic waste and production scrap. Built for continuous industrial operation, it delivers high performance while producing uniform plastic regrind suitable for immediate reuse in the manufacturing process. The crusher is capable of processing a wide range of materials, including LDPE, HDPE, PVC, PP, PET, PS, PA (Nylon), engineering plastics, rubber waste, and non-abrasive thermosetting materials Guodpfozvmy Tex Af Tjh Technical Specifications Model: PC-600 • Rotor diameter: 260 mm • Rotor knives: 18 moving knives • Stationary knives: 4 knives • Capacity: 100–250 kg/h • Motor power: 15 kW • Power supply: 380 V, 3-phase, 50 Hz • Feed opening: 320 × 620 mm • Screen hole size: 10 mm • Rotor speed: 885 rpm • Maximum material wall thickness: up to 10 mm • Machine dimensions (L × W × H): 1900 × 1100 × 2000 mm

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Feed conveyor Erdwich HA800 hammer mill Gjdpfx Aoztp D Aef Teuh Soundproof enclosure Knock-off belt THM Overband magnet ERIES Elevator belt Vibrating feeder for re-separation Re-separator IMRO Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 2,500 kg, opening width: 1,400 mm, extraction nozzle diameter: 200 mm, power: 37 kW (50.31 HP), We are offering this used Gross GZ40 shredding plant, manufactured in 2021. Four-shaft shredder GZ 40 Feed opening: 1,400 x 1,300 mm Throughput capacity: material and screen dependent Disc diameter: 280 mm Cutting head: 700 x 760 mm Number of cutting shafts: 2 Number of cutting discs: 38 Number of clearing shafts: 2 Number of clearing discs: 38 Motor power: 2 x 18.5 kW Screen size: without screen Suction nozzle: 200 mm Weight: approx. 2,500 kg Machine with hopper, control cabinet Gusdpfjzr Rvdex Af Tjh Year of manufacture: 2021 If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Guedpfx Aozp Ilqjf Teh Engine power: 11 kW

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), We sell the shredder as a set including a pit conveyor, shredder, and discharge conveyor. The Vecoplan universal shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power output of 55 kW, is equipped with 60 cutting heads measuring 60x60 mm. A turbo coupling facilitates the start-up process, allowing the machine to be started even with a full hopper. Gedpfxozmzdus Af Tjuh The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. The machine, including the control panel, is offered for sale. The hopper and extraction hood are included. Spare parts are included in the price of the shredder. The machine was in operation at an R&D center in Israel. Now that the company is operating a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging for pallet transport.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s Gsdpjzl Shzsfx Af Tjuh • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.