Ht Solutions

Condition: good (used), Year of construction: 1996, Machine will come with tool holders. Parts shown by hand not come. Lajdszncpzepfx Aftod Technical details shown on picture.

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 24,000 rpm, Control system: SIEMENS 840 D solutionline Operating hours: 12,400 h Spindle hours: 2,850 h Table surface: 840 x 420 mm Max. table load: 300 kg Tool holder: BBT 30 Tool magazine: 25 positions Chip-to-chip time: 1.7 s Chip conveyor Software package: Lsdezkimxepfx Aftsad - Job Shop - Siemens Mdynamics Approx. 20 tool holders with ER collet chucks (ER 20, ER 25, ER32) 1 analog edge probe Dimensions L x W x H: 2340 x 1650 x 2500 mm Weight: 4,100 kg

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 220 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, table load: 10 kg, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, number of axes: 5, This 5-axis DMG Ultrasonic 10 was manufactured in 2010. It features a maximum spindle speed of 40,000 rpm and a travel of 220 x 200 x 280 mm. The machine is equipped with a Siemens 840D solutionline control and has a maximum table load of 10 kg. If you are looking to get high-quality machining capabilities, consider the DMG Ultrasonic 10 vertical machining centre we have for sale. Contact us for further details. • Working hours: 19,000 h Laedoy H Ea Nopfx Aftod • T-slots: 60 • Spindle interface: HSK-A32 • Power: 25 kVA

Condition: ready for operation (used), Year of construction: 2009, operating hours: 16,616 h, travel distance X-axis: 120 mm, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details. • Manufacturer: SAUER GmbH Ultrasonic • Component: Main Drive, 40,000 rpm Laodpfxoy Hhwko Aftod • Operational mode: S1 • Speed 1: 36,000 rpm • Speed 2: 42,000 rpm • Output performance 1: 6 kW • Output performance 2: 6 kW • Torque 1: 1.7 Nm • Torque 2: 1.3 Nm • Voltage 1: 400 V • Voltage 2: 420 V • Current 1: 10 A • Current 2: 9 A • Frequency 1: 1,200 Hz • Frequency 2: 1,400 Hz • Connection: Star • Protection type: IP54 • Vibration quality: < 1 mm/s • Cooling: Water • Rotor moment of inertia: 0.000252 kg·m² • Insulation class: F • Connection diagram: 635 • Max. ambient temperature: 40 °C • Thermal protection: KTY 84-130 and PTC

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 850 mm, total width: 780 mm, overall weight: 250 kg, spindle speed (max.): 2,000 rpm, spindle motor power: 750 W, product length (max.): 800 mm, number of axes: 3, This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details. • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min • Rapid traverse: 500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg Ledpfx Ajy E S Uqsftjad • Power supply: 230 V / 50 Hz Technical Specification Taper Size SK 30

Condition: used, Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, 2019 Brother Speedio M140 X2 (5 Axis 4+1) Plus 2019 Brother Feedio. Brother M140 CNC Machining Centre – 5 Axis – Available Immediately. The Brother M140 CNC machining centre is a compact, high-speed 5-axis machine designed for precision component manufacturing. Built in 2019, this machine offers excellent productivity with a high-speed spindle, 22 tool capacity and through-spindle coolant, making it ideal for subcontract machining environments. The machine has a full service history and is available immediately for inspection. Machine Details Machine: Brother M140 CNC Machining Centre Year: 2019 Control: Brother C Control Axis Configuration: 4+1 / 5 Axis Tool Capacity: 22 Tools Spindle: 16,000 rpm Face & Taper Through Spindle Coolant: 35 Bar CTS Equipment & Options Rear exit swarf conveyor NOP pumps for washdown and flood coolant Bag filtration system Air bench mist extraction Additional Information Full service history High-speed machining capability Feedio Robotic Machine Tending System with ABB 6 Axis Robot – Available Immediately The Feedio robotic machine tending system is an automated loading and unloading solution designed to improve productivity and reduce manual handling in machining environments. Built in 2019, this system is equipped with a 6-axis ABB robot and twin-head loading capability, allowing efficient automated part handling. The system includes 4 metre conveyors and is suitable for integration with CNC machines for fully automated component loading and unloading. System Details System: Feedio Robotic Machine Tending System Year: 2019 Robot: 6 Axis ABB Robot Conveyor Length: 4 Metres Loading System: Twin Head Load / Unload Ledpfx Aey Ewf Ujftoad Features Automated machine loading and unloading Twin-head handling for increased efficiency 6-axis robotic flexibility Integrated conveyor system for part flow Ideal for CNC production automation This system is well suited for subcontract machining environments looking to increase automation and production efficiency. For further information, pricing, or to arrange an inspection, please get in touch.

Condition: used, WILLEMIN MACODEL W 408 B is a 5‑axis machining center engineered for precision, high accuracy and reliability. Capacity: X250 Y200 Z300 mm; A360° B -10/+100°; res. 0.001. Spindle up to 30,000 rpm; 24 tools HSK E40; Ø50×L93 mm (1 kg); rapid traverse 30 m/min; 3x400V 50Hz, 18 kVA. Accessories: collets F‑35, BLUM Nano tool‑break control, spindle cooling, coolant system, automatic central lubrication, fire extinguishing system. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical. Ljdpfxoyxp Dcs Aftjad

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Lajdpfxeyxnzae Aftsd

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 213-65, Verfahrweg X-Achse: 300 mm Laedpfx Aoywmziofted Verfahrweg Y-Achse: 250 mm Verfahrweg Z-Achse: 250 mm Werkstückgewicht (max.):1 kg Anzahl der Werkzeugplätze：12 Pos Steuerungshersteller:Fanuc Steuerungsmodell: 21m 3x / 2x 21iM Kühlmittelzufuhr:1 bar Anzahl der Spindeln:1 Eilgang Z-Achse: 60 m/min Eilgang X-Achse: 40 m/min Eilgang Y-Achse: 40 m/min Drehzahl (max.): 10.000 U/min Werkstückdurchmesser (max.): 63 mm 4.Achse Peiseler AWU P100 die Maschinen wurden 2016 durch Chiron CMS überholt Ausstattung: Dokumentation/Handbuch, Drehzahl stufenlos einstellbar Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden.

Condition: used, control Siemens Sinumerik 840D table load 0,7 t work piece spindle speed 200 - 2300 U/min total power requirement 12 kW ATC, 10 positions Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Ledpfx Afsyqt E Tjtsad Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2019, operating hours: 15,034 h, functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 300 mm, feed length X-axis: 200 mm, feed length Y-axis: 440 mm, feed length Z-axis: 300 mm, controller manufacturer: Fanuc, rotational speed (max.): 16,000 rpm, spindle speed (max.): 16,000 rpm, spindle nose: BT30, Equipment: chip conveyor, documentation/manual, 5-Axis CNC Machining Center Brother Speedio M140X2 with Loading Robot Zerobot 100P 2.0 Price: €142,000 plus VAT Location: 83134 Prutting Sale exclusively as a complete system _____ Description For sale is a high-quality, automated turnkey system comprising a 5-axis CNC machining center Brother Speedio M140X2 and a Zerobot 100P 2.0 loading robot. The system is in very good, well-maintained condition, fully operational, and was in productive use until recently. The robot is currently adapted to the Brother machine, allowing for rapid recommissioning. Ideal for series production, unmanned operation, and flexible automation. _____ CNC Machine Brother Speedio M140X2 • Year of manufacture: 2019 • Control: Fanuc • Condition: very good, thoroughly cleaned o No coolant residue in the tank o Fully functional • Travel axes: o X: 200 mm o Y: 440 mm o Z: 300 mm • Spindle: o BT30 o 16,000 rpm o Through-spindle coolant o C-axis rotary function with simultaneous operation o Spindle replaced NEW in April 2024 • Total operating hours: 15,034 h • Accessories: various accessories (see photos) _____ Ljdpfxoyhwuuo Aftead Loading Robot Zerobot 100P 2.0 • Year of manufacture: 2021 • Model: 4-axis loading robot • Max. payload: 100 kg • Control: browser-based (web-enabled) • Material handling: o 3 racks o incl. 300 brackets for raw material • Accessories & Equipment: o CE declaration of conformity available o Grip jaw set: 6 pairs, clamping range 10–130 mm o various accessories (see photos) _____ Inspection & Handover • Inspection under power: possible by arrangement • Dismantling & collection: by purchaser • Sale to commercial customers, without target group restrictions _____ Summary • Sale price €142,000 plus VAT • Fully automated, ready-to-use manufacturing solution • Ideal for companies looking to automate quickly & cost-effectively If you are interested or have any questions, we look forward to hearing from you.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 164, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: GE FANUC Series 16i-M, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS X-axis travel: 250 mm Y-axis travel: 200 mm Z-axis travel: 300 mm Number of axes: 3 Max. spindle speed: 14,000 rpm Table length: 400 mm Table width: 250 mm Number of T-slots: 3 Distance between T-slots: 80 mm T-slot width: 14 mm Tool magazine capacity: 48 Tool holder: HSK E40 Working feed rate: 20 m/min Rapid traverse: 30 m/min Max. feed force: 3,700 N MACHINE DETAILS Control: GE FANUC Series 16i-M Resolution: 1 µm Compressed air supply: 6 bar Electrical connection: 50 Hz 3x 400 Volt Spindle drive power: 10.4 kW Total power requirement: 18 kVA Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,630 x 2,265 mm Machine weight: approx. 1,700 kg Lajdpfx Aoyhnzkeftjd Required floor space: approx. 2 m² EQUIPMENT Vice: Jaw width 100 mm Set of tool holders Coolant system Lighting

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm Lajdsyhcfkjpfx Aftjd • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: FANUC, controller model: 21i-M series, spindle speed (max.): 10,000 rpm, spindle motor power: 3,700 W, number of axes: 3, This 3-axis CHIRON FZ08W was manufactured in 2006. A vertical CNC machining center featuring a Fanuc 21i-M series control, it offers X, Y, Z travels of 300 mm, 250 mm, and 250 mm respectively. It includes a table size of 550 x 300 mm, a spindle speed of 10,000 rpm, and a 12-position tool magazine. Consider the opportunity to buy this CHIRON FZ08W vertical machining center. Contact us for more information. Ledpfjygl D Hex Aftjad • Condition: Used • Status: Good • Table size: 550 x 300 mm • Permissible load: 200 kg • Tool magazine: 12 positions Additional equipment • Chip evacuator

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Ledpfjx Hqwgox Aftjad Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Maximum tool weight: 15 kg Spindle speed: 40,000 rpm Tool holder: HSK-E32 Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Machine weight: 2,800 kg No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Year of manufacture: 2013 Axes: 5 Ledpjx Hqwajfx Aftjad Travel X axis: 300 mm Travel Y axis: 300 + 100 mm Travel Z axis: 330 mm Swivel range A axis: -90° – +90° Rotary axis C: 360° Table load capacity: 200 kg Maximum tool diameter: 40 mm Maximum tool weight: 3 kg Maximum total tool mass: 33 kg Number of tools: 21 Spindle speed: 24,000 rpm No liability is assumed for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Ljdpfx Aox Hqv Nsftoad Table load capacity: 80 kg Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 9,339 h, travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: Sinumeric 840D, total height: 2,253 mm, table load: 10 kg, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, number of axes: 5, This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with 40,000 rpm max speed, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options like a DMG PP-400 Infrared probe and RS NC-4 tool measurement. If you are looking to get high-quality milling capabilities consider the DMG ULTRASONIC 10 machine we have for sale. Contact us for more information about this machine. Additional equipment • Workpiece Measurement: DMG PP-400 Infrared probe • Tool Measurement: RS NC-4 • Coolant Conditioning Equipment: KM 10 Machine Benefits Lodpox D Naxefx Aftead Technical Machine Benefits • Surface area: less than 2 m² • Required space (lxwxh): 4100x3700x2300 mm • Machine on time: 2773 hours • A axis: -10° to 120° • C axis: 360° • Feedrate – feed speed range: up to 10000 mm/min • Repeatability in x / y / z: p8 μm Extra Information Workpiece NC Table with Clamping Surface: ø 190 mm ed of Rotary Axes (A / C): 100 rpm / 150 rpm Positioning Accuracy (A / C Axis): ± 5 Tools Tool Magazine: 60 items, chain magazine Chip-to-Chip Replacement Time: 15 seconds Media Compressed Air Required: 6 bar Average Air Consumption: 20 m³/hour Working Voltage: 400V (N / PE) / 50A Dimensions Machine Depth 775 mm

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Ljdpfxexxxu Uj Aftsad

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm Lsdpexd T Rzofx Aftjad The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well Lodpfewth Sbex Aftsad as subject to prior sale!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 010-001, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 300 mm, Machine purchased retrofitted in 2018 at GF Lasdpfxewg R N As Afted

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° Lsdpfx Afsu E El Ietsad OFFER SCOPE U.A: (non-exhaustive list): Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided

Condition: used, TECHNICAL DETAILS - number of hours : 34373 - strokes X x Y x Z : 220 x 120 x 170 [mm] - fixed table size : 350 x 140 [mm] - working feed : 0 - 5000 [mm/min.] - spindle speed : 20 000 [Rpm] - spindle diameter : 60 [mm] - tools type : ISO 25 - changer : RANDOM 20 positions Laodpjuhbq Nefx Afted - spindle motor : 1.5/3.4 [kW] - installed power : 6 [kW] - size : 1830 x 1250 x 1750 [mm] - weight : 1 500 [kg] EQUIPMENT - control CNC FANUC 16i - rigid tapping - spindle cooling unit - oil mist extractor - measuring rule on the 3 axis (1/10 [um]) - tools measurer Blum - Humard robotization for parts - 3 R parts cell - lubricating tank with pump

Year of construction: 2006, operating hours: 82,068 h, condition: good (used), functionality: fully functional, machine/vehicle number: 258-22, Moving column machine in steel-concrete composite construction with workpiece changing device. Low-maintenance model from the world-renowned manufacturer CHIRON. Double spindle - vertical - machining center incl. chip conveyor KNOLL AE 1058.009 and a compound unit (already dismantled). Prescribed maintenance intervals for plant and plant parts have always been observed. TECHNICAL DETAILS Drilling capacity in steel: 60: 2 x 6 36 mm (with insert drill) Guides: with long term grease lubrication speed range: 20-12.000 rpm CNC control: SIEMENS 840D spindle distance in X-axis: 250 mm X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plane) rapid traverse speed 60 m/min in X-, Y- and Z-axis Main spindle drive: 1 piece with 2 AC motors power at 100 % ED: 9,5 kW power at 15 % ED:14,0 kW Drive: digital direct drives with indirect absolute path measuring system (no reference point approach) tool places: 212 Tool diameter: max. 65 mm Tool diameter with free neighboring places: max. 175 mm Tool weight: max. 2.5 kg (5.0 kg at 2 stations) Tool change time: approx. 0.9 s (depending on control) Chip-to-chip time: approx. 2.1 s (control-dependent) Workpiece changing device: 0 / 180 Tool holder: HSK A 63 1 MACHINE DETAILS type of current: 3 / N / PE - 50/60 Hz operating voltage: 400 V power: 44 kVA rated current: 63 A Coolant system HL 450 / 900 LATE CONVEYOR Manufacturer: KNOLL Type: AE 1058.009 Year of manufacture: 2006 EQUIPMENT - CHIRON maintenance manual on screen - Operating hours and piece counter - Socket 230 V - Socket for portable mini handwheel - Control cabinet cooler as door-mounted unit - Signal lamp - splash guard cladding - chip conveyor - mini control panel - Rinsing gun - Central pneumatic connection - Fixture flushing - 70 bar HP pump - 1 internal cooling package with suction unit - Fully enclosed working chamber - Extraction unit with air cleaner Laedpemt A Ivefx Aftjd - Extraction capacity 800 m³/h - CHIRON mold life monitoring with: - Automatic loading door of the splash guard - "opening" and "closing", actuation via two-hand start release - Integrated IWW 0/180° workpiece changing device - Chiron Lasercontrol Single F500 - Ethernet connection RJ45 at the control cabinet instead of in the control panel - Pneumatic and hydraulic connections - Central hydraulic and pneumatic connection prepared for max. 20 connections, 6 connections are designed including connection couplings, 4 of them for hydraulics, max. 210 bar and 2 for uncontrolled pneumatics. - 4 Additional hydraulic connection(s) - Hydraulic power unit - 2 Hydraulic aggregate extension for further clamping circuits