Χ & Ε Χαιρετη Ο.Ε.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, production capacity: 12,000 unit/h, TECHNICAL DETAILS Maximum temperature: 125 °C Flow rate: 6,000 - 12,000 liters/h Redpozia D Eofx Aahsw EQUIPMENT Integrated deaerator

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar Rsdjziawrjpfx Aahew - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment - Technical Note: Functional condition, service history, wear parts and cooling / high-pressure safety components should be checked before recommissioning.

Condition: used, Year of construction: 2020, OVERVIEW This Permeare ADA 600-1000 ion exchange resin unit, manufactured in 2020, is designed for the treatment of food-grade liquids, especially wine and must. The system can be used for tartaric stabilization of red and white wines and musts by means of ion exchange resin technology. The machine is a compact, skid-mounted treatment unit with four vertical resin columns, stainless steel pipework, a dosing pump system and an integrated electrical control cabinet. The system operates with two resin columns working alternately, allowing one column to be in production while another column is regenerated. The process is controlled by PLC and monitored via a Siemens SIMATIC Touch Panel and a Mettler Toledo M200 analytical controller. The unit is manufactured with metallic parts in AISI 316 stainless steel, while the plastic parts are specified as suitable for food industry use. The resin volume is listed as 120 litres. The maximum column flow is indicated as approx. 40 hl/h. The machine is supplied with documentation including instruction manual, P&ID process diagram and electrical schematics.   TECHNICAL DATA - Manufacturer: Permeare S.r.l. - Manufacturer Location: Milan, Italy - Machine Type: Ion exchange resin unit / softening unit - Type / Model: ADA 600-1000 - Year of Manufacture: 2020 - Application: Ion exchange treatment / tartaric stabilization of wine and must - Process Principle: Ion exchange resin treatment with alternating resin columns - Resin Volume: 120 l - Resin Type: Type A - Resin Supply Form: OH- - Maximum Column Flow: approx. 40 hl/h - Flow Rate per Column: 4–10 BV/h - Dosing Pump: Chemical / regenerant dosing pump installed on skid Rjdpfx Aajzh T R Aehew - Maximum Operating Pressure, Process Side: 10 bar at 38°C - Maximum Design Operating Pressure: 10 bar - Maximum Liquid Inlet Pressure: 5 bar - Operating Temperature Range: 0 – 40°C - Storage Temperature Range: +5 – +50°C - Material, Metallic Parts: Stainless steel AISI 316 - Material, Plastic Parts: Suitable for food industry use - Skid Construction: Open stainless steel frame structure - Power Supply: 230 VAC - Frequency: 50 Hz - Nominal Power: 1 kW - Nominal Current: 4.2 A - Control System: PLC-controlled unit - Operator Panel: Siemens SIMATIC Panel Touch - Analytical Controller: Mettler Toledo M200 - Condition: Used, installed / as complete skid-mounted industrial process unit

Condition: used, Year of construction: 2021, Overview Rjdpfozh Il Ijx Aahow This belt press was manufactured in 2021 by Germany AMOS INDUSTRIE. The machine is designed for fruit juice processing. It is still installed and can be visited in production on request.  Technical data  - Capacity: 1,200 kg/hour - Application: Fruit juice - Configuration: Belt press - Operating hours: 200

Condition: used, Year of construction: 1998, Overview This complete glass bottling line was manufactured between 1996 and 1998 by various European manufacturers. The line is designed for the filling and packaging of bottles and includes depalletizing, rotary light vacuum filling, capsule application and smoothing, corking and screw capping, and automatic palletizing. The equipment is suitable for automatic bottling operations with a production capacity of approximately 10,000 bottles per hour.  Technical data - Capacity: approx. 10,000 bottles/hour - Application: Automatic bottling and packaging of bottles - Filling system: Light vacuum filling - Rinser: Penetrating nozzle rinser - Cleaning system: Compatible with automatic CIP cleaning - Closure types: - T-top corks - Pilfer caps - Stelvin caps - Compatible closure sizes: - 31.5 × 44 mm - 30 × 60 mm - Capsule application: Automatic capsuling machine with integrated thermal heads for PVC capsule smoothing - Capsule smoothing: Automatic smoothing machine for complex capsules and tin capsules - Palletizer: Rodezh Ikdopfx Aahsw - Drag-type automatic palletizer - Compatible with European and American pallets - Format memory for up to 15 palletizing patterns - Utilities: - OCME Dorado 162-T Depalletizer: 6 kW - Irundin 36/44-8 Filler: 10 kW - Robino & Galandrino M. Monostadio Z T 6: 4 kW - Nortan Aurora 160: 3 kW - Tedelta CR 504: 3 kW - OCME P115/N/S Palletizer: 15 kW Scope of Delivery  - Depalletizer | OCME | Dorado 162-T | 1998 | High-speed drag depalletizer - Rotary filler | Irundin | 36/44-8 | 1998 | Light vacuum filler with penetrating nozzle rinser and CIP compatibility - Capsule applicator | Robino & Galandrino | M. Monostadio Z T 6 | 1998 | Automatic capsuling machine with integrated thermal heads - Capsule smoothing machine | Nortan | Aurora 160 | 1996 | Automatic capsule smoothing machine - Corking and screw capping machine | Tedelta | CR 504 | 1998 | Automatic closure application for corks, pilfer and Stelvin caps - Automatic palletizer | OCME | P115/N/S | 1998 | Drag-type palletizer with format memory

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil Rsdpfszh Ifuex Aahjw - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, conveyor belt length: 15,000 mm, production capacity: 6,000 unit/h, For sale is a complete filling system from the manufacturer Tetrapak, consisting of the following components: TBA 8 filling system (year of manufacture: 1994) Tetra Cap Applicator 21 (Recap 3) (year of manufacture: 2003) Tetra Carton Packer 70 (year of manufacture: 2002) Inkjet printer EBS 6500 Approx. 15 m of conveyor belts with motors and brakes Spare parts TECHNICAL DETAILS Production capacity: 6000 units/h Conveyor belt length: approx. 15 meters Rodpjzh H Stsfx Aahow MACHINE DETAILS Operating hours filling system: 85,286 h Operating hours cap applicator: 36,416 h Operating hours carton packer: 38,626 h EQUIPMENT Tetrapak TBA 8 filler without pull tab Tetra Cap Applicator 21 (Recap 3) Tetra Carton Packer 70 Inkjet printer EBS 6500 The machine’s maintenance has been carried out exclusively by Tetrapak in recent years.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and sealing system + rinser, infeed conveyor, and automatic labeling system from the manufacturer ENOS! Note: The seller will handle the dismantling of the machine. The buyer is responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour MACHINE DETAILS Input voltage: 400 V Rjdpfx Aajzh Dtbehow Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling system

Condition: good (used), functionality: fully functional, We are selling 2 magnetic curve conveyors, 90°, 5-lane, for bottle transport. Price per unit: €400, both for €700. Rjdpfx Aajzhtnnjhjw

Condition: used, Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt systems for bottles and crates Redpfx Aaozhl Hpshjw Additional title: Reusable bottles; manufactured between approx. 1971 and 2016 Nominal capacity appr.: 12000 Fl/h Formats: 0.5 l Euro and NRW, 0.33 l Giesinger; crown caps Features: Uncorker; Unpacker; Crate washer; Bottle washing machine; Empty bottle inspector; Filler and capper; Labelling machine; Date coding; Fill level/label/cap inspector; Packer; Palletising system

Condition: used, machine/vehicle number: PST33, Sterilizer Tetra therm aseptic flex NG - 6.3T UTH with homogenizerTechnical Specifications & Performance DataThis Flash Pasteurizer and UHT sterilizer is engineered for high-efficiency thermal processing across dairy and beverage applications. The configuration described as 6.3T UHT + HOMO indicates a continuous aseptic module with integrated homogenizer capability and a maximum process temperature up to 144°C. Designed around tubular or plate heat exchangers, it delivers stable performance with precise thermal control.Process type: Indirect, continuous UHT in aseptic conditionsHeat exchanger configuration: Tubular or plateCapacity range (standard fixed modules): 4,000–32,000 L/hTurndown option: up to 1:3 with split heater and F0 control availableMax process temperature: 144°CElectrical power (excluding homogenizer): 23–60 kWUtilities consumption (reference tubular HX with product-to-product regeneration): Rinse water 1,000–2,000 L/h; Cooling water 0–100 L/h during production and 500 L/h during cooling; Steam 22 kg/h typical (110 kg/h peak during heat-up); Instrument air 50 Nl/minVoltage / Frequency: 400 V / 50 HzModel/Configuration: Tetra Therm Aseptic Flex, 6.3T UHT + HOMOMaterials: Product piping in stainless steel AISI 316Approximate layout dimensions (14,000 L/h reference module): Length 12,350 mm; Width 5,400 mm; Height up to 3,165 mmAdvanced Automation & Control SystemsThe system is fully automated and structured into defined operating phases for consistent product quality and simplified operation. It integrates modern PLC control and operator-friendly HMI to ensure repeatability, traceability, and safety.Operating phases: Pre-sterilization, Production, AIC (aseptic intermediate cleaning), CIP (clean-in-place)PLC: Allen Bradley CompactLogix or Siemens S7HMI: TPOP operator interfaceElectrical: 400 V, 50 HzAutomation features: Frame-mounted frequency converters, prewired power and signal cablingSafety and monitoring options: Conductivity meter for CIP control, differential pressure gauge, UPS, turbidity meter for phase fine-tuning, paperless data recorderQuick optimization: Swing-bend sections for manual thermal-area adjustment; F0 control optionProduction Line Integration CapabilitiesThis UHT Flash Pasteurizer integrates seamlessly within industrial packaging and beverage production plants. It can be paired upstream with deaeration and mixing and downstream with aseptic holding, sterile tanks, and filling monoblocks in a used bottling line or second hand processing setup.Inline/standalone: Operates as a standalone thermal unit or integrated within a complete beverage production lineUpstream options: Deaeration module (eco-mode available), product preparation, split heater for high-viscos... Rjdpfxezhk T Ie Aahsw

Condition: used, Year of construction: 2016, Overview  Rodpszhaadsfx Aahew This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle - Application: Cold-glue labelling of beverage bottles - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates - Label positions: Front, back, neck - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: used, Inspection machine for detecting labelling errors, under- and overfilled bottles, and faulty closures. Defective bottles are diverted. The bottles passing through are also counted. The fill level is measured using gamma absorption. Additional title: Full-bottle inspection machine; years of manufacture appr. 1997 - 2008 Capacity max.: 30000 bo/h Power: 300 VA Redpfxozg I Ndo Aahow Voltage: 230 V Frequency: 50 Hz

Condition: used, Year of construction: 2002, A counter-pressure filler for glass bottles, featuring a total of 40 short-tube filling valves and a capping machine for crown caps. The bottles undergo a double pre-evacuation prior to the filling process. Additional title: Counter-pressure fillers with short-tube filling valves Capacity: 12000 bo/h referring to 0.5 litre bottles Power: 13 kW Current: 18,75 A Voltage: 230 / 400 V Redpfx Aaszg I H Ashew Frequency: 50 Hz Machine partitioning: 125 mm Running direction: left -> right Operation / Control: Simatic S7-300 Position: in auf Füßen stehendem Edelstahlgehäuse Base construction: Carousel-type machine Features: 40 short-tube filling valves, 10 capping heads for crown corks, protective enclosures with doors, control cabinet

Condition: used, Year of construction: 1995, A cap remover for removing crown caps from bottles in beer crates. Two crates are uncapped per cycle. The removed crown caps fall into a tray positioned beneath the machine. Additional title: Cap remover for crown caps with 2 uncapping heads Capacity filling line: 12000 Fl/h Formats: crown caps Running direction: left -> right Operation / Control: Simatic S5-95-U Position: in a footed stainless steel housing Base construction: straight-running Features: 2 uncorking heads, motorised crate transport, control cabinet with control buttons Rodezg Iy Aepfx Aahow

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Rsdpfx Aajzg In Tshsw

Condition: new, Year of construction: 2021, machine/vehicle number: LC645, Used KRONES Aseptic filling line for PET 54000 BPH - 2021Technical Specifications & Performance DataThis Krones aseptic PET complete bottling line delivers high-speed performance and sterile processing for sensitive, high-acid beverages. Engineered for efficiency and reliability, it combines advanced stretch-blow molding, dry aseptic filling, capping, inspection, labeling, and end-of-line handling to ensure consistent quality at scale.Production speed: 54000 bphContainer types: Designed for PET bottle handlingBottle formats: Compatible with 0.15L, 0.23L, 0.5L bottle formatsNeck and cap: 38mm neck finish with double-layer 38mm capAseptic method: Dry Aseptic (high-acid product capability with gas unit)Blow molder: CONTIFORM 324 SPEED, 24 cavitiesFiller-Capper bloc: CONTIPURE ASEPTBLOC DA VFJ 4.320-132-103, 132 filling valves and 44 capping nozzlesInspector: CHECKMAT 731 FM-X+LYear of manufacture: 2021Operating hours: 0 (never used)Documentation: All manuals availableAdvanced Automation & Control SystemsThe line integrates Krones SitePilot Line Diagnostics for real-time performance monitoring, data analysis, and process optimization. Coordinated controls across blow molding, aseptic filling, capping, inspection, labeling, and conveying enable stable, repeatable operations and efficient ramp-up to nominal speed. Dry aseptic technology minimizes media consumption while maintaining sterile conditions for high-acid beverages.Production Line Integration CapabilitiesEngineered as a complete system, this bottling line includes cap sorting and feeding, preform handling, container conveying, coding, multiple labeling technologies, drying, and quality inspection. It supports smooth inline operation and rapid format changes within the 150 ml to 500 ml range.Cap sorting and feeding systemPreform feed unit and PREFORMCHECK RT preform inspectorContainer conveyor systemLaser and inkjet coding unitsSleeve labelers with tunnel, neck labelers, and anti-counterfeit labelersFull-bottle X-ray inspection and Krones CHECKMAT inspectionDrying system and extraction hood for the blow molderHigh-pressure compressor and pure steam generatorMachine Condition & Maintenance HistoryBrand new, never used, and still in original packaging with 0 working hours. Manuals are included to support commissioning and operation. Equipment has not been in production and presents as factory-new.Operational Performance & VersatilityThis aseptic PET bottling line is optimized for high-acid beverage production, combining Krones dry aseptic technology with precise stretch-blow molding and hygienic filling. Multiple labeling stations (sleeve, neck, anti-counterfeit) and integrated coding provide strong brand presentation and traceability. Inline inspection with X-ray and CHECKMAT enhances quality control for fill level, closure, and packaging integrity.Installat... Rjdpfx Aezg D Tlsahow

Condition: used, Year of construction: 1994, We offer this used KETTNER RBS 90-80 M pallet destacker, manufactured in 1994. Two machines are available. Rodjzgv Egepfx Aahew Adjustable for different pallet sizes; the first destacker is set by default for 100x120 pallets, and the second for 80x120 pallets. Manufacturer: KETTNER Model: RBS 90-80 M Order number: 944707/02 Year of manufacture: 1994 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2010, machine/vehicle number: LC601, Technical Specifications & Performance DataThis complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs.Production speed: 24,000 bphPrimary application: Hot-fill juiceContainer handling: PET bottlesValidated format example: 0.5L, 0.3L, 1.5LNeck mesurment: 28mmManufacturing years: 2010 (core equipment), 2011 (palletizer)Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400)Line type: Blow, fill, cap, label, wrap, and palletizeConfiguration: Integrated continuous production with matched throughput across stationsAdvanced Automation & Control SystemsThe line is designed for synchronized operation from container production to end-of-line packaging. Coordinated controls help maintain stable performance at high speeds and reduce bottlenecks across blowing, filling, labeling, and packaging stations. Operator interfaces facilitate routine adjustments and monitoring, while safety interlocks and guarding support reliable operation in a production environment.Centralized line control with coordinated drives for consistent throughputOperator-friendly interfaces for speed matching and format adjustmentsSafety guarding and interlocked access doorsEmergency stop circuitry across critical stationsQuick-change features to support format and product adjustmentsProduction Line Integration CapabilitiesThis second hand bottling equipment set is engineered to function as a complete packaging line for PET juice, from bottle blowing through palletizing. It can integrate with upstream utilities and downstream warehouse systems. Format changes are supported to align with market requirements, with confirmed capability on 0.5L PET and suitability for similar cylindrical PET formats.Inline operation from blow molding to palletizingCompatible with PET cylindrical bottle formats; validated at 0.5L, 0.3L, 1.5L Hot-fill processing designed for juice productsEnd-of-line shrink wrapping and palletizing for stable distribution packsPotential to adapt speeds and formats within the design envelope of each componentMachine Condition & Maintenance HistoryThe line is currently in production, reflecting regular operational use suitable for immediate deployment after relocation. Component years indicate modern engineering with durable construction standards expected from the listed manufacturers. It is a used bottling line that has been maintained in an industrial beverage environment.Operational status: I... Rodpfxjzgtpvo Aahsw

Condition: used, Year of construction: 1998, Vertical stainless steel tank with content measurement. Capacity approx. 7 hl Additional title: Buffer tank Content: 693 l Working pressure: 0 bar Max. Temp.: 100 °C Material: Stainless steel Position: Free standing Rsdpezgc Hqefx Aahew Base construction: Cylindrical tank with square tube feet Features: Central bottom outlet, side manhole cover, safety valve at the top, two cleaning spray balls, float for measuring contents

Condition: used, vertical stainless steel tank with a capacity of 25 hl Additional title: mixing tank Volume: 2500 l Length: 1400 mm Redpfjzgc Eyex Aahjw Width: 1400 mm Material: stainless steel Position: free standing Base construction: Cylindrical tank with rounded feet in tank shape Features: Manhole in the frame, two side taps, two connections on the tank cover, cleaning pipe

Condition: used, Mixing tank with two different agitators. Capacity approx. 20 hl Additional title: Vertical stainless steel container with two agitators Rsdpozgc Arsfx Aahjw Content: 2000 l Length: 1500 mm Width: 1500 mm Height: 2200 mm Material: stainless steel Position: free standing Base construction: Cylindrical container with flat lid Features: 2 top-entry agitators, hinged lid, side outlet

Condition: used, upright stainless steel container with removable lid and 3 side outlets Additional title: vertical stainless steel vessel Content appr.: 600 l Rodjzgcwispfx Aahew Length: 1000 mm Width: 1000 mm Height: 1230 mm Material: stainless steel Base construction: standing on 3 feet Features: lid, 3 side outlets

Condition: used, vertical stainless steel tank with side-entry agitator, cleaning line, central bottom outlet, side outlet, sampling tap, and level gauge Additional title: vertical stainless steel tank Volume appr.: 3100 l Rjdpfx Aajzgcv Sjhew Length: 1600 mm Width: 1600 mm Material: stainless steel Base construction: standing on 4 feet Features: cleaning pipe, agitator with motor (Turbo-Müller, 3 kW), central outlet, sampling tap, hose level indicator, side outlet, ladder bracket

Condition: used, vertical stainless steel tank with torispherical heads Additional title: Vertical stainless steel tank Volume appr.: 5500 l Material: stainless steel Rodpfezgcvxex Aahjw Position: standing on 3 feet Features: center floor outlet, cleaning pipe, additional connections in the tank dome and frame