INDUX Sa de CV

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle Bjdpfx Aj Agwvmopdodi >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 2820-0484, total height: 1,930 mm, total length: 2,060 mm, total width: 2,430 mm, Equipment: documentation/manual, Product Milling Machine Brand Deckel Type FP 3A Bdedpfxe Aguy Es Apdji Measurements WxDxH approx. 206x243x193 cm Specifications Serial number 2820-0484, Grundig control unit. The machine has been disconnected from the power supply and all fluids have been removed. Details Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 RPM >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel distances X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: Bdsdpfxe Agn Rxe Apdsi >> Coolant system About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on site while it is powered. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school! Technical data: >> Machine No. 1847 >> Swivel-tilting table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Bjdpj Agn Injfx Apdodi Accessories and equipment: >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional cost, the machine can be equipped with a new digital display from K&C.

Condition: used, This DECKEL universal tool milling machine, type FP2A, will be auctioned off in our online industrial auction / machine auction, which includes liquidation of industrial machinery – injection molding machines, CNC machining centers, universal lathes, and more. Bedps Agi Tqsfx Apdjdi You can find this and many other items on our platform.

Condition: good (used), Deckel FP1 3-Axis Active Milling Machine Technical Data: Manufacturer: Deckel Type: FP1 Machine: 3-Axis Active Milling Machine Travel in X-axis: 300 mm Travel in Y-axis: 160 mm Travel in Z-axis: 340 mm Spindle Speed: 40–2,000 rpm Feed: Automatic feed and rapid traverse on the X, Y, and Z axes Bodpfx Aps Agghpsdodi Table Size: 600 × 210 mm Digital Position Display: 3-Axis Heidenhain Spindle Taper: SK 40 Equipment: Work light Emergency stop switch Coolant system

Condition: good (used), Year of construction: 2004, Equipment: documentation/manual, Deckel FP1 Universal Milling Machine – Heidenhain TNC 123 Technical Data: Manufacturer: Deckel Type: FP1 Bdedpfx Apj Agghajdsi Machine: Universal Milling Machine Control System: Heidenhain TNC 123 Travel in X-axis: 300 mm Travel in Y-axis: 160 mm Travel in Z-axis: 340 mm Quill Travel: 80 mm Spindle Speed: 40–2,000 rpm Spindle Taper: ISO 40 Feed Rate Range (3 axes): 5–500 mm/min, continuously adjustable Rapid Traverse Rate (3 axes): 1,200 mm/min

Condition: good (used), functionality: fully functional, Feed rates continuously adjustable in all 3 axes Spindle travel 60 mm Table surface 600 x 250 mm Spindle speeds 45 - 1950 rpm Feed rates 10 – 470 mm/min...continuously adjustable... Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Bsdpfo Agfg Tox Apdjdi Vertical travel (Z) 320 mm

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: Bjdpfx As Agbypjpdsdi >> Machine no. 1114 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal spindle - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be easily moved. All bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, This DECKEL FP1 universal tool milling machine will be auctioned off online in our industrial auction / machine auction – large warehouse clearance – tools, machines, workshop equipment, and metalworking accessories. Bedpfj Af Ir Rjx Apdodi You can find this and many other items on our platform.

Condition: good (used), functionality: fully functional, FOR SALE: DECKEL FP1 Milling Machine Technical specifications: • Model: FP1 (Serial number: 54212/08) • Machining travels: X = 300 mm | Y = 150 mm | Z = 340 mm • Spindle: SK 40 taper • Speeds: Mechanical adjustment via a circular selector on the front panel • Power supply: 400 V / Three-phase • Weight: Approximately 750 kg Included equipment: • VISOMAT 3-axis digital display on an articulated arm • Circular rotary dividing table mounted on the table • Articulated work lamp • Protective bellows for the slides, in excellent condition • Chip collection tray integrated into the machine frame Very clean used machine, slides in good condition, and ready for use. Bsdpfx Apo Af Au Nodsdi

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 9502, year of manufacture approx. 1978 >> Swivel-tilting rotary table >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Equipment: Vertical and horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system Bjdpfe Afy Ngox Apdedi >> Brake motor About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be easily moved. Most of the bellows are new. The previous owner installed a brake motor. An oil change was carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered up. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: >> Machine no. 1399 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel ranges X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication Bdedpfo Afy Elex Apdji About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school!! Technical specifications: >> Machine no. 1212 >> Swivel and tilting table >> Speed: 40 - 2000 rpm Bedpfx Ao Afyy Hopdedi >> Feed rate and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been performed. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: good (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 4,000 rpm, table load: 300 kg, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Table length: 900 mm Table width: 530 mm Table load capacity: max. 300 kg Spindle speed: 40–4,000 rpm Number of speed steps: 21 Spindle power: 2–4 kW Tool interface: SK 40 (M16) Number of tool positions: 20 Bedpfx Ape Afxauodsdi EQUIPMENT 20-position tool changer

Condition: good (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,600 rpm, controller model: DECKEL Contour 3, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 700 mm Table width: 460 mm Table load capacity: 350 kg Spindle speed: 40–3,600 rpm Tool interface: SK 40 MACHINE DETAILS Control system: DECKEL Contour 3 Bdsdj Afxabepfx Apdoi EQUIPMENT Automatic tool changer

Condition: good (used), Year of construction: 1986, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Bdsdpfxe Afvnie Apdei Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Deckel Type: FP1 Machine number: 54.099/08 Machine type: Tool milling machine Bdedj Adulqopfx Apdoi SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 WORK TABLE Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL X-axis: approx. 300 mm Y-axis: approx. 300 mm Z-axis: approx. 300 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,500 mm Weight: 700 kg EQUIPMENT 2-axis digital display

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Bdodps Adui Aofx Apdji TECHNICAL DETAILS TRAVEL X-axis: 400 mm Y-axis: 300 mm Z-axis: 300 mm WORK TABLE Table dimensions: 600 × 210 mm Number of T-slots: 4 T-slot width: 12 mm SPINDLE AND FEED Spindle speed: up to 2,000 rpm Feed range: 10–500 mm/min MACHINE DETAILS Manufacturer: Deckel Type: FP1 Machine type: Tool milling machine Dimensions (L × W × H): 1,000 × 800 × 1,500 mm Weight: 700 kg EQUIPMENT Workshop cabinet Matching accessories for the machine

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Bdsdpfx Aps Aduhlodei Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 WORK TABLE Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL RANGES Travel in X-axis: approx. 300 mm Travel in Y-axis: approx. 300 mm Travel in Z-axis: approx. 300 mm MACHINE DETAILS Machine type: Tool milling machine Manufacturer: Deckel Model: FP1 Machine dimensions length: 1,000 mm Machine dimensions width: 800 mm Machine dimensions height: 1,500 mm Machine weight: 700 kg

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Bdodpfxs Aa Ikrs Apdoi Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: used, machine/vehicle number: 2880, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal tool milling machine Bedo Aaz N Iopfx Apdodi Machine weight: approx. 0.6 t Travel distances X-axis travel: 290 mm Y-axis travel: 120 mm Z-axis travel: 350 mm Work table Table clamping surface: 690 × 175 mm Spindle Spindle mount: SK 40 Speed stages: 17 Speed range: 50–2,240 rpm Spindle drive: dual-pole, switchable with clockwise/counterclockwise rotation Feed Feed range: 42–680 mm/min Feed stages: 14 Electric feed: X-axis Rapid traverse: X-axis via handwheel Milling head and horizontal milling Vertical head: rotatable ±90° Horizontal milling: possible via cross slide Operation and safety Handwheels: Vernier handwheels for all 3 axes Cam switch: 3-way in the X-direction for program sequence Emergency stop: present Main switch: present EQUIPMENT Rotatable vertical head ±90° Vernier handwheels for all 3 axes Rapid traverse via handwheel in the X-direction Electric feed in the X-direction Feed stages adjustable via change gears Cross slide for horizontal milling 3-way cam switch in the X-direction for program sequence Safety emergency stop Main switch

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine Manufacturer: Deckel, Type: FP 5 CC Year of manufacture: 1990 Control system: Dialog 11 X-axis travel: 800 mm Y-axis travel: 600 mm Bdedsz S Ubcjpfx Apdji Z-axis travel: 550 mm Spindle speed: 25 - 6,300 rpm Tool holder: SK 40 Drive power: approx. 12 kW Machine weight: approx. 5000 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. Bdedpfxjz Sqq Ts Apdji • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in very good condition and comes from a training workshop. Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg Bsdpfx Aez Rpcrjpdjdi dimensions of the machine ca. 2000 x 2200 x 1655 mm Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual