Volbo BV

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and closing machine - Currently configured for aluminum tubes - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Machine prepared for hot-air sealing of plastic tubes - Electrical connection for hot-air sealing head available - Hot-air sealing head currently not included / not available - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION In its current configuration, the machine is equipped for filling and closing aluminum tubes. The machine is prepared for the installation of a hot-air sealing system for plastic tubes, including the corresponding electrical connection. However, the required hot-air sealing head is currently not available with the machine. CYCRON is presently in contact with AXOMATIC in Italy to clarify the availability of the original hot-air sealing head or a suitable replacement, as well as further technical documentation, spare parts, and the possibilities for completing the machine for plastic tube processing. Lajdezyu R Uopfx Albeh CONDITION Used machine in very good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. Exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available on request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic table-top tube sealing machine from Neweco is available. Tube materials: LDPE/HDPE/PE/PP/laminate, max. tube diameter: 50mm, max. tube length: 250mm, max. sealing capacity: approx. 720tubes/h, machine dimensions X/Y/Z: approx. 600mm/800mm/800mm, weight: approx. 70kg, estimated counter reading: approx. 80000tubes. Documentation available. An on-site inspection is possible. Lasdszpyymopfx Albsh

Condition: like new (used), A company is selling a wide variety of items due to liquidation. Machinery and miscellaneous items! Check out my other listings too! . A custom-made adhesive dispenser for sale. Works perfectly. Features multiple adjustment options. Lasdey Ahixepfx Alboh

Condition: like new (used), functionality: fully functional, filling weight (max.): 50 g, filling weight (min.): 1 g, overall weight: 50 kg, Various types of machinery for sale due to company liquidation. Check out my other listings too! . Custom-made glitter powder dispenser for sale. Works perfectly. Features multiple adjustment options. Lodpjy Ahifofx Albjah

Condition: used, Year of construction: 2007, The Romaco Unipac U2080 is a versatile, high-performance tube filling and sealing machine designed for pharmaceutical, cosmetic, and chemical products. Operating at a mechanical speed of 80 tubes per minute, it features 9 stations and handles tube diameters from 10–50 mm and lengths from 60–220 mm, offering flexible, precise filling. Key Features and Technical Specifications: Machine Type: Automatic tube filling and sealing machine. Capacity: Up to 80 tubes per minute (mechanical speed). Working Stations: 9. Tube Dimensions: Diameter: 10 – 50 mm. Length: 60 – 220 mm. Lsdpjyvuhnjfx Albsah Application: Suitable for liquids, creams, and gels for pharmaceutical and cosmetic applications, say Makinate and MLTC-Europe.

Condition: used, Year of construction: 1992, Manufacturer : Norden Model : Nordenmatic 700 Year : 1992 Type: Automatic tube filling and sealing machine Capacity: 70 tubes max Filling volume: 1 - 300 ml Dosing accuracy: +/- 0.1-0.5% Tube size range: Length: 50-250 mm / Diameter: Ø 10-50 mm Empty tube feeding : automatic Cleaning + Tube orientation device with a stepper motor Sealing Module: HA - Hot Air Number of buckets: 22 units Product feed hopper + dosing pump Vulcanic Vulcatherm cooling unit (year: 2004) - 3.5 kW (10°C - 35°C) / Outlet temperature: 25°C max - min 3°C Laminar flow Machine dimensions: 135 x 190 x 210 cm Laodpfx Ajx R D Exslboh Weight : 2 400 kg Spare parts sold with the machine. Choose from two formats among many available formats (additional formats can be added as an option). Full documentation available Video in operation available

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Laodpfx Alex R Arkebjh Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Tube holders for plastic tubes Ø 35 mm and 48 mm Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm Laedjx Rqlfepfx Albsh

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 913 mm, total length: 634 mm, total height: 1,700 mm, warranty duration: 12 months, compressed air connection: 6 bar, overall weight: 200 kg, power: 1.9 kW (2.58 HP), input voltage: 230 V, Semi-automatic tube filling machine. Efficiency up to 13 tubes per minute. Dose from 5ml to 270ml Tube diameter from 19mm to 50mm Tube height from 70 to 210mm Made in Poland Machine available to view and test at the firm's premises. Jedliński Packaging sp. z o.o. Lasdpfx Aexx Uihjlboh ul. Wodna 3 05-090, Raszyn Poland

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZTF01, Equipment: CE marking, The fully automatic tube filling and sealing machine is a highly automated device for filling and sealing cylindrical metal tubes or composite tubes with paste materials. It adopts SS304 piston pump to fill the paste materials driven my servo motor, that meets GMP standards, and high accurate in filling. It uses PLC programmable control and a photoelectric identification mechanism for accurate and reliable trademark positioning; it uses frequency conversion speed regulation, a composite opening mechanism for indexing and positioning, and is equipped with the latest international folding and sealing mechanism.Widely used in cosmetic, chemical, adhesive and food industries. Lsdpfx Aoxum Alelbjah

Condition: new, Year of construction: 2025, High-speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. External tube feed lift, water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 160 cycles/minute; filling range: 1-300ml; accuracy: ?±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 50-240 mm; number of filling heads: 2; storage hopper capacity: 70L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 6kW; compressed air: 0.6MPa; machine dimensions: L2870xW1770xH2340 mm. Lajdpfev Nld Iex Albeh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade plastic tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-250ml; accuracy: ±1%; tube diameter: 10-50mm (one mould is required for each tube diameter); tube length: 50-200mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 7kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW760xH1850mm; machine weight: 950kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lsdsv Nldbopfx Albsah

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-120ml; accuracy: ±1%; tube diameter: 10-28 mm (one mould is required for each tube diameter); tube length: 50-180 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW750xH1850 mm; machine weight: 900kg. Laedev Nldhspfx Albsh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; filling range: 1-300ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 50-210 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L2270xW960xH2100 mm; machine weight: 1200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lsdpsv Nldnofx Alboah

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 80-230 mm; number of filling heads: 1; storage hopper capacity: 45L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa; machine dimensions: L2000xW1160xH2100 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lsdpfov Nldusx Albjah

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-60 mm (one mould is required for each tube diameter); tube length: 50-240 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa. Ledjv Nldzjpfx Alboah Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Norden 700 Plastic Tube Filler Provides outputs of up to 70 tubes per minute and is designed and manufactured to produce the highest possible packaging quality standards at maximum operational efficiencies. Plastic and laminate tubes may be sealed using the Norden´s patented Hot-Air Sealing system. Year: 2006 Model:700 Key information: – Production capacity: 70 tpm – Filling volume: 1-300 ml – Tube length: 50-250 mm – Tube diameter: 10-60 mm – Infeed system: cassette Laodpfx Alev Hxu Uoboh – Blow off filling nozzle - Fully working condition

Condition: ready for operation (used), Year of construction: 2022, A complete tube filling and packaging line for ointments is available. 1) Tube feeder IWK TZK 200, year of manufacture: 1991. 2) Tube filling machine IWK TFS 30, year of manufacture: 1991. 3) Cartoner IWK CPS-R, year of manufacture: 1991. 4) Serializer Laetus MV-70-F-130-TL, year of manufacture: 2019. 5) Checkweigher Mettler & Toledo C3570, year of manufacture: 2019. 6) Bundle packer Kiener ASK 450, year of manufacture: 1993. 7) Case packer Skinetta PAL 145, year of manufacture: 1997. 8) Palletizer Skinetta PAL 1400, year of manufacture: 1997. 9) Horizontal laminar flow machine Marchhart LF-ZP-Horizontal, year of manufacture: 2020. 10) Accumulating roller conveyor RBS 140, year of manufacture: 1998. 11) Ointment pump Netzsch BEF200/NM045BH, year of manufacture: 2022. Documentation is available. On-site inspection is possible. Lodpfx Alsuf T Nljboah

Condition: new, Year of construction: 2026, functionality: fully functional, air pressure: 6 bar, Tube filling machine, tube filler Efficiency Up to 40 tubes per minute Dosing Range From 5 ml to 270 ml (High precision ensured by servo drives) Tube Diameter From 19 mm to 50 mm Tube Height From 70 mm to 210 mm Tube Material Heat-sealable (laminate/plastic) or aluminum tubes Dosing System Servo Drives (High repeatability) Control System PLC + Intuitive HMI Panel (with recipe saving capability) Formats One tube format included Automatic Tube Filling Machine JTB-40 Fenix | Up to 40 tubes/min | Wide Dosing Range: 5-270ml | Made in Europe. Professional Automatic Tube Filler JTB-40 Fenix - Perfect for Cosmetics, Chemicals and Pharmaceutical Production. We offer for sale the highly efficient, automatic Tube Filling Machine JTB-40 Fenix – a flagship model from Jedliński Packaging, designed for maximum precision and production flexibility. This reliable machine is the ideal solution for companies looking to optimize the tube packaging process for laminate (heat-sealable) and aluminum tubes. With a high output of up to 40 tubes per minute, the JTB-40 Fenix guarantees a significant acceleration of your production lines. Machine Dimensions and Ergonomics The JTB-40 Fenix Tube Filler features a compact, well-thought-out design, making it easy to integrate into existing lines: Height: 1.9 m Length: 1.7 m Width: 1.3 m Lodpfx Alsk Abyvebjah Main Advantages and Standard Features Precise Dosing: The system based on servo drives ensures accurate dosing of products with various viscosities – perfect for tube filling creams, gels, pastes, and ointments. Process Automation: The machine automatically feeds, orients (using a marker sensor), fills, seals/closes, and codes the tubes, minimizing operator involvement.AISI 316 Materials: All parts in direct contact with the product are made of high-quality AISI 316 stainless steel – the standard required for cosmetics manufacturing and pharmaceuticals. Hot Air Sealing: The version for heat-sealable tubes uses reliable Hot Air sealing technology, ensuring an aesthetic and durable closure. Intuitive Operation: The control panel allows for quick parameter changes and switching between saved recipes.Inspection and ContactThe JTB-40 Fenix machine is available for immediate viewing and testing under load at our company premises. Please contact us to schedule a visit! Seller Contact Details: Company Jedliński Packaging sp. z o.o. Address ul. Wodna 3, 05-090 Raszyn, Poland Location Machine available for viewing and testing at the company's premises Don't miss out! Invest in a new quality of packaging with the JTB-40 Fenix automatic tube filling machine.

Year of construction: 2018, condition: new, For sale is a magnetic filter that has only been used once. Sealed. Includes 9 magnetic filter rods, with cleaning function. Laedpfx Aodzp R Tjlbjh