1,500 pcs. LENOX plastic boxes LB 6040

1.500 St. LENOX Kunststoffkisten LB 6040 LB 604022 Volumen 43,7l, L 60cm B 40cm

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Hedpfog Ufvbjx Ag Usn Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: good (used), Agnelli Automatic sheeter Hodpfx Agetu N A Te Usn Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph

Year of construction: 2023, condition: new, Chillers with different refrigerants and low GWP values can be ordered ex works. We will be happy to advise you on the various refrigerants, application purposes, installation conditions. Hsdpshtfggjfx Ag Uon

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Hedpfxorx Rxtj Ag Uen Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm Hodpfx Agefv Awas Usn spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: L23001388, overall weight: 208 kg, tank capacity: 14 l, type of cooling: water, input voltage: 380 V, Semi-industrial machine designed for mixing dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to producing short pasta, long pasta, and dough strips. Suitable for medium-scale pasta production as well as feeding dough strips to cutters or nest-shaping machines. All parts in contact with dough, as well as the entire structure, are made of stainless steel. The mixers and screw are easily removable for cleaning. Equipped with an automatic cutter with a full set of knives. Additionally, I am offering a new set for penne pasta production for sale (2200 euro). Hsdpfxjw Av Sno Ag Uen

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm Hodpfx Agjfv Avve Uen spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 50.5 kW (68.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 604 kg, input voltage: 400 V, total width: 780 mm, total length: 2,360 mm, total height: 1,680 mm, warranty duration: 6 months, heating capacity: 50.3 kW (68.39 HP), Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYRBA (scroll, inverter) + 2 pcs. Daikin JT170G-KYEBA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x1.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Used, tested, fully operational Hsdpfew Hzyxsx Ag Usn CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Hand-operated, water-cooled spot welding gun Hedpfx Ageg Ew H Ne Usn DALEX Type A 3119 with double-stroke mechanism and short-stroke latch Short stroke 25 mm – long stroke 57 mm with electrode force switch and secondary transformer for current monitoring Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 9.5 kA Electrode force: 180 daN Arm gap: 120 mm Arm reach: 250 mm with synchronous welding control RS 11-2 Main switch, connection cable, and 16 A CEE plug Extensive range of water-cooled electrode arms in stock

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm Hodpsfv Av Iofx Ag Ujn table surface area 120 x 60 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.