High Lift stacker

Yale MS12IL

Condition: excellent (used), Fully automatic filling machine, De Vree V 156 Dkjdpfxeztc Sge Al Aeu Filling capacity: 1-20 liters Automatic cap feeder Automatic cap closer In very good condition, directly from production!!!

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. Dkjdeyx Uy Ajpfx Al Aou • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: like new (used), Frozen block cutter Manufacturer: Magurit Dkodpfx Alsxrvwas Aeu Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

Condition: good (used), Toyo Jidoki pouch packing machine with vacuum option. Has come from major UK food factory but not used for at least five years. Dksdpfxjuf A Idj Al Aeu

Condition: good (used), 1200 m² steel platform Used, good condition, see pictures. Column grid approx. 10x6m Load per m² 800 kg Stairs, railings, transfer station, lift and much more available! Negotiable price: € Price on request! Partial sale and CAD planning possible. All plans and structural calculations available. Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by appointment. Further information on request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse platforms & steel platforms immediately available • 30–50 articulated lorries of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. Dkedjt Ivwxepfx Al Aju 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you came across us because of heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Dodpfx Aox Dcpgjl Aeku

Condition: like new (used), functionality: fully functional, Year of construction: 2018, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Dksdpfx Ajy Nk Hael Asu Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Dkodpfx Alem Ux Tio Aeu Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Dimensions: L: 2300 x W: 1800 x H: 2200mm Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, Single-color flexographic printer for tissue paper. Year: 1991 Dsdpfoy Iddvox Al Ajku Model: Fabio Perini 8930 Printing width: 2800 mm This printing unit must be integrated into your converting line.

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Dksdpfx Alew Nvkio Aeu