Electric 4-wheel forklift

Yale ERP50VM6 (Containerfähig / Container-compatible)

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Bdjdsgf H Saspfx Ab Tek Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm Bdsdpewm Rqajfx Ab Tok

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Bjdpetr U Hlsfx Ab Todk Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Year of construction: 1987, condition: excellent (used), machine/vehicle number: Abus 2to MM2, ABUS crane sky crane runway bridge crane indoor crane crane Payload / lifting load 2t - 2000KG, track about 2700mm External dimensions approx. 3100mm approx BJ 1987 with corridor control Overall height from top edge of crane to hook approx. 900mm Bedpjifyhhsfx Ab Tedk Head carrier length without buffer approx. 2200mm Crane is dismantled, stored and immediately available. Very good condition There are also pillar slewing cranes and wall slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agency possible, please ask for postal code Collection preferred

Condition: ready for operation (used), total length: 900 mm, total width: 400 mm, total height: 1,100 mm, empty load weight: 140 kg, gasleiding: Ø50 x 3,91 mm Bodpfx Ajxllirsb Tsdk stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 2,5 rpm video klik hier Motor power: 1,5 kWt

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h weight max. 8 t Bjdpfx Aewx R T Esb Tedk weight of the machine ca. 13400 kg

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 221910295, Year of construction: 1989, load capacity: 1,750 kg, lifting height: 3,000 mm, load center: 500 mm, fuel type: electric, mast type: triplex, gearing type: mechanical, battery capacity: 480 Ah, battery voltage: 48 V, fork carriage width: 100 mm, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 40 mm, ground clearance: 60 mm, overall weight: 3,140 kg, total height: 2,100 mm, total length: 3,000 mm, total width: 1,000 mm, Equipment: lighting, pallet forks, sideshift, The battery of the forklift was recently replaced. Battery type 24/6 PzS 480, battery serial number 1114597 Charging station included. The forklift has always been operational. Bdodpowmlkhsfx Ab Tjk When the ignition of the forklift is switched off, it continues to function. The battery must be disconnected to switch off the forklift. Some refurbishment work is required.

Year of construction: 1990, condition: used, cutting diameter 420 mm saw band length 4800 mm table height 600 mm total power requirement 3,8 kW Bjdpfx Absl Ichnj Tedk weight of the machine ca. 1,3 t dimensions of the machine ca. 2500 x 1200 x 1600 mm

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg +++++ Bjdpfefym Huex Ab Tjdk Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2008, condition: ready for operation (used), A CNC double-spindle lathe Spinner is available. Turning length: 650mm, turning diameter: 400mm, travel X/Z: 275mm/700mm, travel Y: +50mm/-40mm, tool positions: 16, tool holder: VDI 30. Main spindle: speed: 5000rpm, power: 18kW, torque: 13Nm, bar capacity: 52mm. Counter spindle: Speed: 6000rpm, bar capacity: 42mm. Machine dimensions X/Y/Z: approx. 3700mm/2200mm/1800mm, weight: approx. 5600kg, control: Fanuc 31iTA. Documentation available. On-site inspection is possible. Bdodpswnr Hfsfx Ab Tsk