Electric 4-wheel forklift

Yale ERP35VL F2945

Condition: used, functionality: fully functional, machine/vehicle number: A976B05260N, Year of construction: 2015, operating hours: 13,082 h, load capacity: 3,500 kg, lifting height: 4,610 mm, fuel type: electric, mast type: duplex, construction height: 2,900 mm, fork carriage width: 1,050 mm, fork length: 1,350 mm, drive type: Elektro, Electric 4-wheel forklift Nsdjxn Eg Njpfx Ad Njkt Chassis number: A976B05260N Load centre: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 80V Battery type: PzS

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Nodoxd Au Aspfx Ad Nskt

Condition: used, Year of construction: 2004, Bottling Blower, PET Blowing Machine KRONES Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport, year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety protections Nsdpfx Adswuyt Te Nekt

Condition: excellent (used), Year of construction: 2017, SYNCROBLOC FOR LABELING AND BEER BOTTLING IN GLASS Model: CFT S 94 / A Year: 2017 Production Capacity: Up to 12,000 bottles/hour Container Types: • 0.33 L glass bottles (long neck and champagne type) • 0.75 L glass bottles (champagne type) Supported Caps: • Crown Ø26 mm on 0.33 L long neck bottles • Crown Ø29 mm on 0.33 L champagne-type bottles • Crown Ø29 mm on 0.75 L champagne-type bottles Labeling: • Self-adhesive front and back labels for 0.33 L long neck bottles • Wrap-around self-adhesive labels for 0.33 L and 0.75 L champagne-type bottles PE LABELER Maximum Output: • 12,000 bottles/hour without orientation • 11,000 bottles/hour with orientation Operations: • PLC + touch-screen panel for control • Automatic speed adjustment via inverter and sensors • Status indicator column light Main Components: • 4 self-adhesive labeling stations • Optical fiber system for bottle orientation • Photoelectric sensors for transparent labels • Label ionizer to eliminate static charges • No-Stop labeling system (label change without stopping production) Safety and Structure: • CE-compliant safety guards with protective doors • Plate rotation with servo motors and encoders • Electrical cabinet in AISI 304 stainless steel CFT MONOBLOCK COMPOSED OF: • Fixed nozzle rinser, single treatment, 30 grippers • Isobaric filler with 30 valves • Crown capper with 6 heads • Pitch between valves: 113 mm • Supported bottle diameters: 50 - 98 mm • Supported bottle heights: 125 - 365 mm • Production Capacity: 12,000 bph on glass bottles Filling Features: • Servo-controlled valves for electronic filling phase management • MasterTronic system for automatic regulation of filling phases (pre-evacuation, filling, decompression) • CIP/SIP system for sanitization with automatic dummy bottles Crown Capper • Suitable for Ø26 mm and Ø29 mm crown caps • Centrifugal cap feeder with cap presence sensor • Pick & Place device for cap transfer • Pressure heads with magnetic pickup AUTOMATIC QUALITY CONTROL INSPECTOR Checks Performed: • Minimum and maximum filling level (with foam compensation) • Cap presence via photoelectric sensor • Label presence with dedicated sensors • Automatic ejection of non-compliant bottles Software Features: Nodpfx Aewnybqod Nskt • Real-time visualization of filling and production statistics • Storage for up to 60 bottle formats • MODBUS connection for remote data management INKJET CODER • Printing of codes on bottles and labels • Support for different types of ink CAP ELEVATOR

Condition: excellent (used), Year of construction: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner 10500kw, oil+gas. Year of manufacture 2013. Nsdpfx Adovrkcnj Njkt

Condition: used, Year of construction: 2004, operating hours: 55,000 h, Krones Flat Water Filling Monoblock 2004 KRONES TRIBLOC filling machine with CIP and CTA and HEUFT BOTTLE INSPECTOR. Product type: Non-carbonated water, non-carbonated fruit juices. Rinsing Machine Brand : KRONES Model: Variojet 2,160-54-126 Rinse heads: 54 Wheelbase: 126 Year: 2004/2005 Filling Machine Brand : KRONES Model: SENSOMETIC VP-G-PET 4,320-108-126 Filling valves: 108 Pitch: 126 mm Product: non-carbonated water Sizes: USED FOR 2.0 liters. Can also fill 0.5, 1.0 L and 1.5Lt. Capacity: 30000 b/h Effective size: 2.0 L PET Neck: 30/26 Maximum possible height of the container: 350.00 mm Minimum possible height of the container: 150.00 mm Direction of rotation of the carousel after clockwise entry (from left to right) Year: 2004 With stainless steel KRONES cleanroom housing Capping Machine of Krones triblock Brand: ZALKIN Number of heads: 18 Neck: 30/26 CIP Year: 2004 Voltage 230/400 V Frequency 50 Hz CAT – CTA – CONTROLLED AIR TEMPERATURE Brand: CIAT Year: 2009 Controls the air temperature inside the KRONES CLEAN chamber to maintain the same temperature and also for clean room over-presurization. FILL LEVEL INSPECTOR Brand: HEUFT Krones Used Filling Monoblock for Still Water –  IMMEDIATELY AVAILABLE – AND READY FOR PACKING AND SHIPPING! We can assist your company both in disassembly and assembly, we have competent staff and able to use the correct technology to reinstall this krones equipment. We can carry out a complete project of reinstallation and start-up of production with replacement of every damaged part or to be changed. We need about 1500 square meters for the entire bottling line, with the current layout. The disassembly work requires at least 30 days to be carried out carefully and marking all the cables and mechanical parts. All the programs are downloaded to ensure that no information is lost. Njdpfx Adsvgugtj Njkt

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Nkodpfxeu Scr So Ad Nst

Condition: excellent (used), functionality: fully functional, machine/vehicle number: A976B06555R, Year of construction: 2017, operating hours: 5,080 h, load capacity: 3,500 kg, lifting height: 5,800 mm, fuel type: electric, mast type: triplex, battery model: 80V750Ah, battery capacity: 750 Ah, battery voltage: 80 V, DGUV certified until: 11/2026, fork carriage width: 1,350 mm, fork length: 1,200 mm, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), overall weight: 5,870 kg, Equipment: UVV, pallet forks, sideshift, Very well-maintained forklift truck. In excellent visual and technical condition. Nodex Avacspfx Ad Nekt

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 7,134 h, load capacity: 4,500 kg, lifting height: 3,320 mm, fuel type: electric, mast type: simplex, construction height: 2,375 mm, drive type: Elektro, Electric 4-wheel forklift Nodjv Ihvwepfx Ad Nskt ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery voltage: 80V Battery year of manufacture: 2017 Side shift, 3rd valve, 4th valve, heating, full cabin,

Condition: used, Year of construction: 2017, Overview The blowmoulder was built in 2017 by the manufacturer SIPA. The machine is until February 2026 in operation and can be visited. It is used in a mineral water factory. The blowing machine is in a very good condition due to regular maintenance. Technical data  Nominal capacity: 18.000 bph Nr. of moulds: 8 Last used formats: 0,5l 1,0l 1,5l Neck type: PCO-28-1810 Incl. preform feeding system Incl. preform cooling system Min. - max. bottle diameter: 50 - 125 mm Min. - max. bottle height: 80 - 349 mm Nkedpfex Ti R Ejx Ad Net