Forklift

Yale ERP 20 VF LWB 2000kg freelift heftruck (2702HOURS)

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Lhodpfx Abjylp Slozol Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, working width 4 m Ljdpfxoyv Iu Us Abzehl Number of gangs . 0 Number of folders 2 0 Number of rollers 1 St.

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Ljdpfet Hal Dox Abzshl Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, mileage: 171,210 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 3,220 mm, first registration: 09/2020, fuel tank capacity: 80 l, CO₂ emissions: 215 g/km, emission class: euro6, color: white, number of seats: 2, number of previous owners: 3, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, all wheel drive, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, power assisted steering, trailer coupling, General information Number of doors: 2 Model range: Mar 2019 - Jul 2022 Cab: single Technical information Torque: 420 Nm Number of cylinders: 4 Engine capacity: 1.996 cc Transmission: 6 gears, Manual gearbox Top speed: 180 km/h Measures Dimensions (LxBxH): 543 x 187 x 184 cm Weights Empty weight: 2.114 kg Carrying capacity: 1.156 kg GVW: 3.270 kg Interior Interior: black Consumption Average fuel consumption: 7 l/100km (40 MPG) Urban fuel consumption: 8,2 l/100km (34 MPG) Extra urban fuel consumption: 6,3 l/100km (45 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL Ljdpfx Aoxhdppobzohl = Additional options and accessories = - Alloy wheels (16") - Automatic dipped headlights - Car kit - Driver's airbag - Electrically adjustable door mirrors - Electrically folding door mirrors - Electrically operated front windows - Four-wheel drive - Front fog lights - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Multifunctional steering wheel - Multimedia enabled - Passenger airbag - Radio/CD player - Start / stop system - Telephone enabled with Bluetooth

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 6F070, total length: 1,800 mm, total width: 1,150 mm, total height: 1,600 mm, type of input current: three-phase, input voltage: 200 V, power: 3 kW (4.08 HP), overall weight: 1,400 kg, Equipment: documentation/manual, 1978 very original in excellent condition one color offset machine from the Japanese Sakurai with never used Number Perforating and Impression unit (sprayed in tectyl and deliberately not cleaned by us) is really for that time, compared to other makes incl Heideleberg's GTO46 a top class machine. Very nice and solid machine. Ljdpfxeuga U Ds Abzohl Paper size 32 x 49 cm working with the same size plates as at that time the Rotaprint broadened models as well as Romayor and Fuji 50. The condition is so fine that it would almost be allowed in the reception room of the manufacturer. All documentation is included, electrical schematics are complete with legend and parts book belongs to this machine.

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Lhedpfx Abjw U A T Ijzsl Length: 2600 mm Width: 5000 mm Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Condition: new, Year of construction: 2025, Model: C3T Working Area: 3048mm*1524mm Laser Output Power: 6000w/3000w/2000w/1500w Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double Fast Exchange Tables Fast exchange of two tables greatly improves efficiency. Chain-drive system has better rigidity and higher accuracy, saving feeding time. 2. Tenon-and-mortise Welded Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. Lhsdpfx Abjg D Nz Rjzel 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation Lhodpfx Ajtr U Hlsbzel → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: good (used), Year of construction: 1976, Polygraph OM II Letter press machine good condition running in production avaiable immediately Lhedpfx Abetdcipjzel

Condition: new, 50 linear meters of Jungheinrich MPB pallet racking, new New item, see pictures Height: 9 m Depth: 110 cm, blue Beam length: 2.7 m, yellow Beam capacity per level/bay: 3000 kg Negotiable price: €12,750 net, ex warehouse Offer includes: + 19 units of pre-assembled frames, depth 110 cm, height 9 m + 144 units of beams, length 2.7 m, 3000 kg capacity per level/bay + 288 units of safety locking devices + 78 units of concrete anchors Load capacity signs, documents, etc. are included. Additional accessories can be found in the accessories catalog. Frames are blue, infill panels are galvanized. Heights from 3.5 m to 9 m in stock. Bay load capacity: 12 tons. Beams are yellow. Item is in stock. Transport and assembly are available upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices are excluding VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). Ljdelp Ntgspfx Abzehl ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer truckloads of goods delivered weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF BUSINESS: ONLINE AUCTIONS & UTILIZATION For dismantling and clearance orders, we offer a complete, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete warehouse stocks including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of customers. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!