Trench roller

Wacker Neuson RT 82 SC 2

Year of construction: 2006, condition: good (used), Generator, emergency generator, generator, generator, power generator, generator, emergency generator -Electric start -Power: 3.8 KVA 50 Hz Dljdeflmm Sopfx Ab Tsa -petrol engine -only: 95 operating hours -2x Schuko: 230 volts, 1 socket slightly damaged -Dimensions unit: 580/530/H615 mm -Weight: 79 kg

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. Dledjtyy Sfepfx Ab Tja In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations Dlsdst E Nthepfx Ab Tea

Condition: new, ELMAG Portable Powerstation ENERGY 2400, LiFEPO4 battery with 2232Wh ENERGY 600 - 2400 The new ENERGY series comprises 4 performance sizes of portable power stations for a mains-independent power supply and emergency power supply for your consumers. The extensive range of applications covers all areas of use. Whether for camping, at festivals, as a power source for sales stands or as a self-sufficient emergency power solution in the event of a blackout, the ELMAG Powerstations are always your reliable companion. Display - Battery capacity in % and segments - Remaining runtime - Power output - Power consumption - Output status - Symbol display for protective function Features Outlets: - 4x Schuko 230 Volt - 1x 12V KFZ 10 A - 1x 12V round 10 A - 2x USB-C 60 W - 1x USB-A 5V 2 A - 3x USB-A QC3 Dsdpfx Aet H E Iqeb Tsla Inputs: - 2x 7909 12V - 45V - 2x ANDERSON 12V - 45V - 1x 12 KFZ 10 A LED light 7W Digital display Protection class IP21 Protective functions: - Deep charge - overvoltage - overcharge - short circuit - Overtemperature - Undertemperature 2x mains adapter 200W included 1x car charging cable included ADVANTAGES Lithium iron phosphate battery (LIFEPO4) for maximum safety and durability Also ideal for operation in high ambient temperatures High cycle stability > 2500 cycles 3 charging options: Solar, 230V and 12V Intelligent battery management system with extensive protection functions against undervoltage, overvoltage, overheating, short circuit and overcharging Extensive connection options: Schuko 12V DC, USB-A, USB-C etc. Digital display with detailed status monitoring Integrated MPPT solar charge controller Simultaneous charging and discharging possible Internal lighting with SOS function TECHNICAL DATA Battery type LIFEPO4 Battery capacity 2.232 kWh Voltage type pure sine wave Dimensions LxWxH 425x275x315 mm Weight 25 kg Maximum power 1~230V 5000 W Continuous power 1~230V 2400 W Maximum charging power 400 W

Condition: new, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Dljdoga T Dpjpfx Ab Tja Max. angle of attack ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: ready for operation (used), Year of construction: 2011, vibratory plate Wacker Neuson DPU 6555 He, year 2011, ser.no.10043154, E-Start, power 9,6 KW, weight 481 kg, with widening Djdpfsh Ha Dajx Ab Tsla

Condition: used, Year of construction: 2015, * WACKER NEUSSON DPU 3050 * vibrating plate * from 1st hand * fully functional * 16.5 mm³/H * 1B30-2 * N Dlodpfsr Ext Rjx Ab Tsa * 2,600/min. * 4.2 kW ----Subject to prior sale and errors! Function of the extras without guarantee! We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, mobile WhatsApp, Viber Over 20 years of experience in buying and selling commercial vehicles! - RELIABLE & FAIR -

Condition: new, functionality: fully functional, power: 56 kW (76.14 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 6.5 l/h, fuel tank capacity: 100 l, color: yellow, overall weight: 8,650 kg, empty load weight: 6,741 kg, operation weight: 6,760 kg, tire size: 12.5/80-18, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.2 m³, Year of construction: 2025, operating hours: 1 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, differential lock, gripper hydraulics, hydraulics, low noise, parking heater, standard shovel, traction control, === MAIN SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 0 h Operating weight: 6,741 kg Max. digging depth: 3,795 mm Digging reach: 6,445 mm Bucket capacity: 0.15 – 0.20 m³ Engine manufacturer: Perkins 404F-E22TA Engine power: 56 kW (≈ 76 hp) Drive: Diesel Type: Wheeled excavator Quick coupler: Yes (Easy Lock preparation) Hydraulic functions: 4 AUX circuits (AUX I – IV, incl. Powertilt, High Flow) Air conditioning: Automatic climate control Cabin: Enclosed, heated Travel speed: 30 km/h Stabilisers: No Tyres: Pneumatic tyres Emission standard: Stage V CE certification: Yes === HIGHLIGHTS === 3-point kinematics for superior digging performance Intuitive operation with ergonomic joysticks Dedexrpccspfx Ab Tsla Powerful LUDV hydraulic system with four AUX circuits Triple boom for maximum reach and flexibility Overload valve (AUX I) and Powertilt circuit (AUX III) Easy Lock preparation (AUX IV) and electric refuelling pump Automatic air conditioning and heated cabin Fully CE certified and immediately available === CONDITION === New 2025 model – in excellent working condition, fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). The Wacker Neuson EW65 combines power, precision, and comfort. Equipped with a Stage V Perkins engine, four auxiliary hydraulic circuits, and a triple boom, this wheeled excavator is ideal for intensive daily use in construction, infrastructure, and urban projects. Fully CE-certified and immediately available via Collé Rental & Sales. === DELIVERY === Crane loading available upon request for smooth transport. Flexible shipping options tailored to your destination and logistics preferences. All transports are handled professionally by the Collé Rental & Sales logistics team.

Condition: ready for operation (used), Year of construction: 2010, vibratory plate Wacker Neuson DPU 6555 He, year of manufacture 2010, ser.no.2147924, E-Start, power 9,3 KW, weight 476 kg, with extension Dsdpfx Aboh Ha D Es Tela

Condition: excellent (used), Year of construction: 2005, It is a precision measuring device for simple and fast measurement of through-hole drills and blind drills of burrs and end mills. This device is indispensable as basic equipment for modern tool shops, sharpening shops and CNC machine operators. The equipment is used in the woodworking and metalworking industries, as well as in glass and stone processing. Everywhere where tool inspection is required. It allows checking the dimensions of the tool its radii or profile and the quality of the cutting surfaces. - measuring range: - Z axis 370 mm - X axis 115 mm Dlodpfsu Sbpcex Ab Tsa - Total weight: about 200 kg