Mini excavator

Wacker Neuson ET90

Condition: used, functionality: fully functional, overall weight: 9,300 kg, Year of construction: 2021, operating hours: 4,060 h, Equipment: UVV, Wacker Neuson ET90 – Crawler Excavator Year of manufacture: 2021 General equipment Fully glazed, tilting safety cab Cab heater Side sliding window Front windshield that can be recessed inwards Air-suspended driver's seat with seat heating Automatic climate control Complete DAB radio Rear view camera LED work lights at the front and rear Additional ballast (+291 kg) Diesel refueling pump Proportionally controlled auxiliary hydraulics (AUX I) Shock absorber for auxiliary hydraulics "Advanced" overload warning system with safety valves for boom, stick, and blade cylinders Proportionally controlled control circuit (AUX II) Grapple control circuit (AUX V) Preparation for Easy Lock / hydraulic quick coupler (AUX IV) Gsdpfx Aezbrfmofhsiu Preparation for PowerTilt (AUX III) Engine Water-cooled Perkins turbo diesel engine Model: 904J-E28T 4-cylinder engine Power: 55.4 kW (75.3 hp) Emission standard: Stage V / Tier IV Final Exhaust gas aftertreatment: AGR (Exhaust Gas Recirculation) DOC (Diesel Oxidation Catalyst) DPF (Diesel Particulate Filter) Air filter with integrated cyclone pre-separator Idle speed automatic control Hydraulic system Load-Sensing Hydraulic System (LUDV) with variable displacement pump Pump output: 180.5 l/min Hydraulic pilot control with joystick operation Valve control according to ISO, DIN, SAE, PCSA and EURO standard Auxiliary hydraulics for two directions of movement, piping to the stick (AUX I) Auto-2-speed travel drive: Two travel speeds with automatic switching Gear can be locked manually Hydraulically pre-controlled and dampened travel pedals and travel levers Hydraulic oil cooler Proportional control for auxiliary hydraulics (AUX I) "Basic" overload warning system

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length Giodpfxetrlv Se Afhsu - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Power Split S30 (30 tons) = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, Year of construction: 2021, operating hours: 2,787 h, Equipment: air conditioning, Technical information Drive: Track Engine type: Perkins 904J-E28T Empty weight: 9.372 kg Dimensions (LxBxH): 669 x 250 x 256 cm Gedpfx Aey Rfykjfhsiu Functional Mast: articulated arm Length of jib: 7,88 m Working height: 819 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Hammer/sorting function - Hammer function - Radio - Rotation function - Rubber tracks - Sliding leaf - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier V General Country of production: Austria Powertilt and 3 digging buckets, 3-section adjustable boom and rear-view camera

Condition: good (used), Year of construction: 2005, Excavator CASE WX125 no. HHCWX125N5LB00688 Year: 2005 86 kW 9786 hours one bucket Godpjx Atlisfx Afheiu weight: 13 t No documents

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: blue, operation weight: 3,375 kg, Year of construction: 2025, New RIPPA R 32 Pro mini excavator, Japanese Kubota engine, 4 cylinders, 18.5 kw, Euro 5 emission, Tier 4 Stage V, picker installation, air conditioning, mansalier camera, year of manufacture 2025, quick coupler, 1000 mm slope bucket, warranty. Gedpfxowlvzuj Afhsiu

Condition: used, Year of construction: 2017, operating hours: 14,612 h, Drive: Wheel Make of engine: Deutz Dipper / stick length: 250 cm Please contact Kristoff Van Havere for more information - Tiltrotator SMP - Hydraulic quick hitch CW30 - Very beautiful condition ! - New bucket 1800mm Gisdpeyyt Uhefx Afheu

Condition: good (used), machine/vehicle number: 85382, UNIVERSAL MACHINING CENTER MAHO MH 800 C, series: 85382 X axis stroke 800 mm Y axis stroke 500 mm Z axis stroke 600 mm Giedpoldgf Hsfx Afheu Work table dimensions: 900x625 mm Maximum weight allowed on the table: 600 kg Spindle rotation speed: from 20 to 5.000 rpm, 15 kW Tool taper: ISO 40 cone Tool shop with 30 positions MAHO numerical command Machine dimensions: 3,350mm x 2,520mm X 2,500mm; Car weight: 6,200 kg Good technical condition Price EURO 13.000 + VAT Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with independent motorisation Squaring carriage length 3800 mm Main blade diameter 400 mm Scoring blade diameter 120 mm Blade tilt 0-45 degrees Max cutting height at 90 degrees 140 mm Max cutting height at 45 degrees 97 mm Godeytufgopfx Afheiu Blade rotation speed rpm 3000/4000/5000 Scoring rotation speed rpm 8500 Main blade motor power Hp 9,5 Scoring blade motor power Hp 1,7 Cutting width at parallel guide 1500 mm Parallel guide programmed with THK sliding Electronic adjustment of the scoring unit Squaring frame with ‘COMPEX’ device for angled cuts with automatic compensation of the stop position. Start/stop buttons integrated into the carriage Eccentric workpiece clamping arm Extension to the work surface Squaring guide with 3 LCD readers for stop positions Full support and Wireless: adjustable frame for angled cuts complete with wireless function Suction mouth diameter: at the base 120 mm - at the suspended guard 100 mm Overall dimensions of assembled machine mm 4200 x 4300 x 1800 h Overall dimensions for transport mm 4200 x 2350 x 1800 h + Pallet mm 1600 x 1000 x 800 h Weight kg 1140

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining Gjdox Nqqxepfx Afhoiu * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Godpfx Aedf Ud Sefheiu Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: