Curtain sider van

VOLKSWAGEN Crafter Pritsche 35 mittel L2 Doppelkabine

Year of construction: 1990, condition: ready for operation (used), A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible. Dledev Nn Hxjpfx Ab Tea

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, 1 Used Concrete Batching Plant In excellent condition! Manufacturer: EUROMECC Model: EURO 5 MIX Year of manufacture: 2019 Theoretical capacity: approx. 120–150 m³/h (each mixer approx. 60–75 m³/h) Total production to date: approx. 145,000 m³ Aggregate storage in high silo / inline silo (reihensilo) • Capacity: 5 bins – each 45 m³ Dlodpfx Asxn A Azsb Tja • 4 load cells (each 5,000 kg capacity) • Silo loading via feed conveyor belt • Truck feed via loading hopper (25 m³ volume) Complete plant with winter enclosure / insulation Mixers • 2x Planetary mixers with agitators • 2x EUROMECC MEP 3000/2000 Dosing system • Aggregates: Weighing container • Mixer feed: via Y-dosing unit (1 aggregate weigh bin for 2 mixers) • Water dosing: 2 units – 1 water scale per mixer (500 kg per scale) • Admixture dosing: 2 units – 1 admixture scale per mixer (2x12 liters) • Cement dosing: 2 units – 1 cement scale per mixer (1,000 kg per scale) Control system • Operator/control container included • Main control system: ElettronData Cement silos – total: 6 units • 4x 150 m³ (Diameter: 4.6 m) • 2x 75 m³ (Diameter: 3.5 m) Optional equipment: • Warm air heating system inside container • Chemical admixture storage in container • Rest concrete recycling system (optional) Condition: • The plant is in very good and fully functional condition. • AVAILABLE IMMEDIATELY • Location: Denmark • Price: on request Note: Offer is net ex-works, subject to prior sale. Errors, omissions, and/or misrepresentations excepted. No warranty or guarantee. Sold “as-is”, lying or standing. Any duplication, publication or reuse of this offer – in part or whole – is strictly prohibited.

Condition: used, mileage: 6,000 km, power: 375 kW (509.86 HP), first registration: 06/2024, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: mechanical, emission class: euro6, Year of construction: 2024, Equipment: air conditioning, MAN 35.510 TGS 8x4 SWAN S 47-5 Dodexw Apgjpfx Ab Tjla German documents CoC available! CONCRETE PUMP Without registration / NEW (only transfer mileage) * Production date: 2024 * Manual transmission * Aluminium rims

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available immediately for rental periods of 4 weeks or more - Contact O. Schinke o. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, ramp incline 1,300 mm, Dodexwk Evepfx Ab Tela Rear loading ramps 2,950 x 1,700 x 900 mm ramp angle approx. 11 degrees, hydraulic ramp jack, ramp hydraulically movable, Grease aid, smart board, loading bed extension, Spare wheel holder, including spare wheel, storage box, 1 support at the front: telescopic support aluminum leg for uncoupling, 2 foldable support legs at the rear with spring holder, To operate the hydraulic components, a corresponding truck hydraulic system with forward and reverse air is required (not included in delivery) also available as a rental vehicle in the long term! Contact us - we will make you our individual offer.   * ABS * Steering knuckle on the 2nd and 3rd axle * Side impact protection * Rubber-metal pads on the loading ramps * Plastic tool box * Single lift axle * Platform side walls * Hydraulic ramp jack * Hydraulically movable ramps * Spare wheel holder * Rotating beacon * SAF axles * Smart board * Supports * Warning package * Central lubrication system We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information about accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Some of the images have been edited and are for initial viewing only. If you are interested, please contact us and request current images.

Condition: used, empty load weight: 11,140 kg, maximum load weight: 33,860 kg, overall weight: 45,000 kg, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 9,000 mm, loading space width: 2,550 mm, loading space height: 920 mm, loading space volume: 21 m³, suspension: air, wheelbase: 1,310 mm, color: grey, Year of construction: 2025, gearing type: other, rear tire size: 235/75 R 17.5, driver cabin: other, emission class: none, 3-axle low-bed semi-trailer with wheel loader recesses and hydraulic steering, maneuvering steering with radio remote control, hydraulic rear supports with radio control, electrohydraulic pump unit, extensions up to 3,000 mm. * 2 aluminium ramps to the platform Djdpfx Aexxqmiob Tsla * 4 extendable warning boards with lighting * 4 wheel loader recesses with cover * Support device * Steering knuckles on 2nd and 3rd axles * Excavator recess 1,250 x 700 x 505 mm * Control box for air suspension * Permissible fifth wheel height 1,220 mm * ECAS * Electrohydraulic pump unit without batteries * 2'' king pin * Double loading ramp * LED reversing lights * Hydraulic steering axle * Double steering axle * Single lift axle * Platform side walls * Wheel loader recesses * Hydraulic ramp lift * Hydraulically adjustable ramps * Beacon * Reversing lights * Smart Board * Supports * Drum brake * Warning package * Central lubrication system Vogel

Condition: used, maximum load weight: 38,440 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available upon request. - Loading area with rear taper approx. 1,000 mm x 8° - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm - JOST landing legs (mechanical) with 2-speed gearbox rated for approx. 24 t lifting capacity (approx. 50 t test load) - BPW axles and suspension, 1 axle self-steering - Technical axle load: 12,000 kg each - Air suspension with raise/lower valve - Topcoat in solid RAL 3002 carmine red - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Electro-hydraulic unit mounted at the rear under the loading area - Load gauge for determining axle loads, including load chart - On the gooseneck: removable ALU side walls and rear wall, approx. 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 6 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area - Galvanized extensions, extendable by approx. 230 mm per side - Lift axle on the 1st axle - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 2 LED reversing lights mounted on the rear plate Dlsdpfxjxthz Te Ab Tsa - HRM metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 37,635 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment features. Complete specifications available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area * Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each * Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift/lowering valve * Axle tool kit Tyres: Dlodpfxsxtc Ubo Ab Tsa * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data Braking system: * WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with turbine blasting machine after welding * Second blasting treatment with corundum for optimum coating adhesion * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray mist test according to ISO 9227-NSS * Cavity sealing with special wax Including the following extras: * 2-inch kingpin * One

Condition: new, overall weight: 42,000 kg, axle configuration: 2 axles, Equipment: ABS, Internal reference number for inquiries: PAVIC 2-axle forestry machine low loader Type: STLT2Z for harvester transport ---- In pre-order! Color freely selectable!!!! ----Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis as a welded steel construction made from high-quality fine-grain steels Lashing rings 130 kN, 5 per side Additional lashing rings, 3 pairs on the raised platform Removable stanchion system made from galvanized steel with aluminum drop sides (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety interlock Central lubrication system SKF with reservoir (brake light controlled), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Coupling height: 1,330 mm Ground clearance at driving level: 184 mm Fifth wheel lead distance: 600 mm R1 dimension (from king pin to front): 410 mm (swing clearance radius) R2 dimension (from king pin to frame): 2,150 mm (swing clearance radius) Further dimensions available upon request (technical drawing) Axles: 2 x 12,000 kg (technical) Gigant axles with drum brakes, equipped with 8 x 245/70 R17.5" branded tires on Alcoa Dura Bright wheels Suspension: Pneumatic suspension with lift and lower function Second driving height + approx. 50 mm can be activated from the cab. At 20 km/h driving speed, the vehicle automatically lowers again. Incl. axle load manometer Coupling device: 2" kingpin (interchangeable, single position) WITHOUT support legs! -> Customers use a large timber beam placed under the front frame here. Brake system: Wabco EBS with axle load measuring system (smartboard) incl. odometer Dodpfjxvz Sksx Ab Tela Parking brake: spring-loaded Lighting system: Taillights: 2 pairs (3-chamber lights) Side marker lights: LED Outline marker lights: LED Front and rear position lights: LED Reversing and auxiliary lights, each as round lights License plate light: LED 1 removable beacon, switchable from the cab via dedicated switch 4 LED work lights 4 oversize warning markers, double secured (wing nut and pin), with red/white LED illumination Steering: Tridec HF-E (hydraulic displacement steering on both axles) including automatic alignment and straight-line positioning. Tridec remote control (wireless remote control), also usable in wired mode Paintwork: Complete steel structure, shot-blasted after welding and primed with special adhesion primer. Final two-component paint finish in RAL color of your choice. Axles and wheel hubs in black, or painted in RAL color for an additional charge Other attachment parts are galvanized and/or painted/powder-coated, or made from aluminum (with or without anodizing) Approval: Including §13 inspection certificate Including §70 exemption certificate (Customer must provide a suitable and approved 3-axle tractor unit), includes, among other things, a swept path test at TÜV Nord in Meppen. Financing, as well as leasing or hire purchase, is possible. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.