SCREDDER FOR PLASTICS

VEM

Condition: good (used), Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Construction type: 1x B5 6x B3 -Protection class: IP 44 -Price: per piece -Quantity: 1 available Codpfxsckd Efo Akcjrb -Dimensions: 450/250/H310 mm -Weight: 57 kg

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: Crjdpfxsiyyf Io Akcjb complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: used, functionality: fully functional, power: 7.5 kW (10.20 HP), protection type (IP code): IP54, VEM KPER 132 SX2 7.5 kW functionally tested Crodpfx Aox H N Dljkcob

Condition: used, Year of construction: 2019, functionality: fully functional, input frequency: 50 Hz, Complete Fuel Polishing & Storage System – 130,000 L Capacity Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Independently controlled via front-panel PLC Operational indicators and flow meters (L/h) Crsdpfx Akew Hdg Uocob Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Underground Diesel Storage Tanks (x4) Total capacity 130,000 litres Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Designed for safe and precise operation External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill Credpfx Akeh Di H Dscsb -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: used, functionality: fully functional, Various electric motors in stock Different renowned German manufacturers From 1 to 160 kW All electric motors function tested Crjdox Nh S Tjpfx Akcjb

Condition: good (used), electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B5 -Bolt circle diameter: 300 mm -Hole spacing: 212 mm Cjdpfxoct A Iws Akcerb -Recess Ø: 250 mm -Protection rating: - -Dimensions: 475/285/H330 mm -Weight: 69 kg

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Cjdpfx Akoyh Nfuecerb Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 50 rpm -Power: 0.25 kW Cjdpfx Akec U Tz Aecjrb -Design: B5 -Shaft diameter: 28 mm -Protection class: IP 54 -Outer flange: Ø 160 mm -Recess: Ø 110 mm -Price: per piece -Quantity: 2 available -Dimensions: 405/160/H215 mm -Weight: 14.2 kg

Condition: used, Year of construction: 1978, functionality: fully functional, wheel diameter: 500 mm, Bevel Gear Milling Machine ZFTKK 500 (spiral bevel) Cedpfx Asyw Rpkekcjrb For sale: bevel gear milling machine ZFTKK 500 designed for machining spiral bevel gears. The machine is ideal for gear production applications, offering high precision and consistent repeatability. Technical specifications: Max. gear diameter: 500 mm Max. module: 10 mm Max. face width: 71 mm Number of teeth: 6 – 100 Max. ratio: 1:6 Radial adjustment: 30 – 220 mm Bevel angle adjustment: 0 – 90° Cutting speed: 40 – 80 m/min Machine in very good technical condition, ready for operation.

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM Cjdpfx Aotqd Ndekcjrb THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: like new (used), Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, power: 1.1 kW (1.50 HP), rotational speed (max.): 32 rpm, input current: 3 A, total length: 2,000 mm, Dust seal with very few hours in very good condition, have bean used with tree power after a cuclone, Credeyza U Ropfx Akcsb

Condition: refurbished (used), functionality: fully functional, An electric motor from VEM motors GmbH is for sale. Technical details can be found on the nameplate. The motor was overhauled by Alfred Schmid. It has an output of 7.5 kW. Crjdpfx Aksv T U Azocsb

Condition: like new (used), Manufacturer: V. Randwijks Rotor Dia.: 500mm Credpfx Aksg Snt Sjcob Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Condition: excellent (used), For sale: VEM electric motor in industrial version. The motor is used, in good visual condition. Visible signs of use and deposits and rust on the flange resulting from operation and storage. The motor is operational. Ideal for industrial applications, machinery, pumps, fans, and production lines. Technical data: Manufacturer: VEM Power: 7.5 kW Rotational speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Supply: 3 phase Cos φ: 0.86 Crodoyv Uuzjpfx Akcsb Protection class: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: Used Signs of use Visible corrosion on parts