Machine stairs

VA 6 stufig Höhe 1680 mm

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Lrjdpfx Ahjm Ux Tievji Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Dimensions: L: 2300 x W: 1800 x H: 2200mm Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Condition: like new (used), Year of construction: 2002, Stainless Steel Shrink Wrapping Tunnel Wrapping Tunnel for packing products with strech foil, Producer: Schur Machine Model: E 340 Lredehqfnljpfx Ahvji Year of production: 2002 Complete Stainless Steel Tunnel Opening dimensions 750 x 400 mm. That is not used long time, like new one!

Condition: excellent (used), Factory new stainless steel transport container / silo Item number: 10441 Last use: Unknown Quantity: 46 pieces Volume: 1000L Type: Standing in stainless steel frame Material (wetted): 1.4301 / AISI304 Design: Single-walled Ledpfx Ajd S H Rqjhvsri Bottom: Cone bottom Top bottom: Curved Working pressure according to type plate: ATM Dimension tank: Distance drain to bottom: 130mm total height: 1610mm Total width: 1160mm Total length: 1160mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Facilities: Nameplate: yes Outlet valve: cone closure For this IBC you can get the matching dosing unit article number: 10445

Condition: good (used), Used electrically heated stainless steel container / transport container item number: 10453 Final use: paints and varnishes volume: 1000 L Type: Standing in galvanized frame Material (in contact with media): 1.4301 / AISI304 Design: With electrical heating and insulation Base: Vaulted Top soil: Vaulted Operating pressure according to type plate: 0.20 bar Tank dimensions: total width: 1010mm total length: 1200mm Ljdpofdgraefx Ahvjri total height: 1860mm distance drain to floor: 340mm materials: Interior: 1.4301 / AISI 304 Frame: stainless steel facilities: Nameplate: Yes Outlet Type: Pump Electrical trace heating

Condition: like new (used), VD Process Industry big bag discharging station with bag tipping cabinet Refurbished Big bag discharging station equipped with frame for electric hoist and big bag cross beam (excluding electric hoist) Bag tipping cabinet Fitted with DMN stainless steel rotary valve type: BL200 2 Lsdpfxexc I I Sj Ahvjri See our other advertisements VMA Wekerom

Condition: like new (used), Used stainless steel container / transport container / IBC Item number: 10654 Last use: Pharma Lrodpfx Ajig Huzehvji Number of pieces: 97 Volume: 785 liters Type: Standing in stainless steel stacking rack Material (wetted): 1.4404 / AISI316 Height of feet: 930mm Manhole 400mm Empty weight: 178 Kg Construction: Single wall Working pressure according to nameplate: ATM Tank dimension: Total width: 990mm Total length: 1190mm Total height: 1545mm Materials: Interior: 1.4404 / AISI316 Outer parts: 1.4301 / AISI 304 Facilities: Nameplate: No Diameter blind nut: DN 80 Diameter outlet: DN 100 DIN11851 Spigot at the top: DN 50

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 03/2027, total length: 700 mm, overall weight: 285 kg, total width: 650 mm, total height: 1,420 mm, electrical fuse: 10 A, input frequency: 50 Hz, empty load weight: 285 kg, Planetary Beater Boku - Diosna Model: RS 30 S 2 working functions: 1 x mixing / 1 x beating 1 mixing whisk 1 beating whisk 1 25-litre stainless steel bowl Work shaft/mixing shaft as new Bowl quick lift Mixer with bowl lighting Timer - manual/automatic Connection: 400V, 16A-CEE plug Ledpfx Ahjwyrzmsvjri Refurbished and SAB-tested used machine with warranty + spare parts service Options: New stainless steel bowl Ring gas burner Service package Delivery service Maintenance contract Commissioning and instruction Many more planetary beaters available from stock!

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Lsdpfxoigyp He Ahvjri Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de Lredpfx Aoibx S Nohvji