Automatic pressure casting machine

Unimak ECM B 12/8

Condition: good (used), Manufacturer: Haver & Boecker Documentation available Mechanical conversion from 50 kg to 25 kg bags in 1999 Control system: Siemens S7 Gujdpfxjv Sz Tdj Anksb Upgraded to the latest standard with spare parts support in 2015 Supported bag types: Quicklime, hydrated lime, cement, gypsum

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter Gusdpfx Aoxzq Ncsnksb 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Gsdpfxjd Tiu Ej Anksub Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units Gusdpfx Ajdfgg Ijnkob D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers Gjdpfx Anslxzl Eskjub - container for liquid extracts, etc.

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe Guedpfxjxxm Hfj Anksb 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Year of construction: 2002, condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Price: on request Gujdpfx Anoitcvuokeb

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Gjdpfx Aneyk R Dyjkjub Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks!

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. Gujdpjtpxy Tofx Ankob The machine is brand new and has not been commissioned.

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Punching force 220 kN Godpex D Nwwsfx Ankjub This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching