High Lift stacker

Toyota BT SWE160L

Condition: used, functionality: fully functional, machine/vehicle number: 2488108, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, power: 3 kW (4.08 HP), battery capacity: 300 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, turning radius (inner): 1,493 mm, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical Data - Year of manufacture: 2019 - Drive: Battery - Operation: Walk-behind Rsdpfexlcc Aox Ahzobt - Load capacity: 1,600 kg - Support arm lift capacity: 2,000 kg - Lift height: 4,150 mm - Mast height extended: 5,056 mm - Load centre: 600 mm - Weight: 1,439 kg - Fork dimensions (L x W x T): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m - Max. travel speed: 0.6 – 6.0 km/h - Max. lift speed with/without load: 0.17 m/s / 0.33 m/s - Max. gradeability with/without load: 7% / 12% Fully functional, standard signs of use.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: used, functionality: fully functional, machine/vehicle number: 2488118, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, power: 3 kW (4.08 HP), battery capacity: 300 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, turning radius (inner): 1,493 mm, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical Data - Year of manufacture: 2019 Redpjxlccvjfx Ahzobt - Drive: Battery - Operation: Walk-behind - Load capacity: 1,600 kg - Support arm lift capacity: 2,000 kg - Lift height: 4,150 mm - Mast height extended: 5,056 mm - Load centre: 600 mm - Weight: 1,439 kg - Fork dimensions (L x W x T): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m - Max. travel speed: 0.6 – 6.0 km/h - Max. lift speed with/without load: 0.17 m/s / 0.33 m/s - Max. gradeability with/without load: 7% / 12% Fully functional, standard signs of use.

Condition: used, functionality: fully functional, machine/vehicle number: 2488178, Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,150 mm, free lift: 1,666 mm, load center: 600 mm, fuel type: electric, power: 3 kW (4.08 HP), battery capacity: 300 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 70 mm, turning radius (inner): 1,493 mm, overall weight: 1,439 kg, total height: 1,946 mm, total length: 2,045 mm, total width: 790 mm, color: red, Equipment: pallet forks, Technical specifications - Year of manufacture: 2019 - Drive: Battery - Operation: Pedestrian - Load capacity: 1600 kg - Support arm lift: 2000 kg - Lift height: 4150 mm - Free lift: 1666 mm - Mast height extended: 5056 mm - Load centre: 600 mm - Weight: 1439 kg - Fork dimensions (L x W x H): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 2.05 m x 0.79 m x 1.95 m - Max. travel speed: 0.6 - 6.0 km/h - Max. lifting speed with/without load: 0.17 m/s / 0.33 m/s Rjdpfx Ahsxnwpcjzebt - Max. gradeability with/without load: 7% / 12% Fully functional, normal signs of use

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Rjdowugczspfx Ahzjbt Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 price: 9.400€ Rsdogpwgaepfx Ahzobt contact : Mr. Rainer Eckerle

Condition: like new (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, injection pressure: 2,500 bar, plate length: 695 mm, plate width: 695 mm, power: 49.5 kW (67.30 HP), type of input current: three-phase, Equipment: documentation/manual, Arburg Allrounder 520 E 1500-400 Golden Electric Machine as new. Very little used, only for sample production. Machine is fully equipped: 40 mm screw High wear resistant cylinder 2nd core pull control for sequential movements – holding pressure via check valve Rbjdsxbpbkjpfx Ahzjt 4 free water manifold circuits with optical flow indicator Conveyor belt – electric 6 electric heating control circuits for mold temperature control Full documentation available. Complete specification list available by email upon request.

Condition: like new (used), Year of construction: 2021, operating hours: 301 h, machine/vehicle number: 257240, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, injection pressure: 2,000 bar, plate length: 637 mm, plate width: 637 mm, power: 42.7 kW (58.06 HP), type of input current: three-phase, Equipment: documentation/manual, Arburg Allrounder 470 E 1000-170 Golden Electric Machine as new. Very little used, only for sample production. Machine is fully equipped: 30 mm screw High wear-resistant cylinder 2nd core pull control for sequential movements – holding pressure via check valve 4 free circuit water manifold with optical flow indicator Conveyor belt – electric Rbjdsxbn T Sopfx Ahzst 6 electrical heating circuits for mold temperature control Full documentation available. Full specification list on demand via email.

Condition: used, Year of construction: 2007, functionality: fully functional, Transformer station 630kVA 20kV, Gräper/SGB, 2007, used, Transformer with HV plug-in bushing, dial thermometer Rbjdpfx Ajx Swn Ajhzot

Condition: excellent (used), Year of construction: 2011, Engel VIPER 40 stand alone linear robot (2011) Number of axis: 3 Euromap 67 on the robot X= 900mm Y=1900 mm Rbjdpfexc E S Iex Ahzst Z=3320mm Data must be chcecked with our technical team