Forklift

Toyota 02-8FGF25 2500 kg LPG heftruck

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm Fedpfx Akjy Tbf Iovegf max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Fgjdpjh Iy Ruefx Akvof Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Fgedezi Ra Ropfx Akvef Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: ready for operation (used), Working width: 2350mm, min. slitting knife spacing: 110mm, slot width: 5mm, slot depth range: 0mm-550mm, binding edge area: 45mm, max. material weight: 2000g/m². Documentation available. An on-site inspection is possible. Fsdpfxoyi E E As Akvsgf

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Equipment: CE marking, Drent Gazelle 6 Imr (Blue Series) Model: P (485 mm) Year: 1998 4 wet offset printing units Web width: 485 mm Print width: 485 mm Paper weight: 40 to 180 gsm Mechanical speed: 250 m/min Delivery: reel-to-reel, reel-to-fold, reel-to-sheet Printing cassettes: 24" (12"), 22" (11"), 23"+1/3 (11"+4/6 x A/4), 18" (9"), 17" (8"+3/6), 15", 14" Cross-hole perforation cylinders Grafi-control system Archive holes Double-track perforations (SHOEBER) Magnetic cylinder station Die-cutting station with waste removal Stack delivery folding station Rewinding station Punching machine + folding machine for offset plates Trim and confetti extractor Fedpfx Akezcal Rsvogf Etc. Complete with all accessories for operation, manuals, and wiring diagrams Location: Italy Availability: Immediate Condition: Good (still in operation)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,610 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,675 mm, fuel type: gas, mast type: triplex, construction height: 2,245 mm, fork length: 1,200 mm, empty load weight: 4,200 kg, total length: 2,700 mm, drive type: Treibgas, construction width: 1,150 mm, LPG Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Very Good Front Tires Type: Super Elastic Front Tires Condition: 100% Rear Tires Type: Super Elastic Rear Tires Condition: 100% Description: Used Toyota factory-reconditioned truck, including a new inspection and new FEM (ex-UVV) approval. Sideshift, 3rd valve, front work lights, roof cover, windshield, full free lift, CE certificate. Fgjdpfswh Dpljx Akvef

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,800 kg, Bale clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020, ISO 2A (41 cm), Capacity 1800 kg, Opening range 530-1900 mm, Width 1050 mm, Clamps 1000 mm ID OS1975 Fodpfx Aozigttekvsgf

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,020 h, load capacity: 3,000 kg, lifting height: 6,000 mm, fuel type: gas, mast type: triplex, empty load weight: 5,500 kg, Equipment: CE marking, front guard, head guard, sideshift, Specification: Forklift type: Petrol/LPG Item code: 11191 Manufacturer: TOYOTA Model: 02-8FGJF35 Fgjdpfsy Nwp Iox Akvef Year: 2014 Lifting capacity, kg: 3000 Mast type: Triple Lifting height, mm: 6000 Drive type: Automatic Operating hours: 8020 Country: Japan Weight (kg): 5500 Forklift attachments: Side shift, front and rear windscreen, 4th hydraulic function Note: The forklift has been inspected – technically sound. A complete service will be performed prior to delivery.

Condition: ready for operation (used), functionality: fully functional, Submitting a bid obligates you to collect the items on time by 31 December 2025! The offer includes: Fgedsxyh Rhspfx Akvef Web offset printing press with cutting unit Edelmann Graphics Webprint 48 Five (Serial No.: 6160-64, Year of manufacture: 2004) Sorting unit Edelmann Graphics HS (Serial No.: B-534, Year of manufacture: 2004) Extraction system incl. piping, frame Roll collator Rotatek Model RC2 (Serial No.: 007, Year of manufacture: 1994) Note: The green unit outside is not included in the system.