Manual stacker

TCM VORKHEFTRUCK FD25Z1

Condition: used, different types available Lhodpfxsdc A Sbj Ad Nob

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm Lsdpfx Aexukrqjd Nehb (up to 70 kg/mm2 Strength of the material)

Condition: used, Year of construction: 2023, Samasz Fisher pruning saw PT3-190 Year of construction 2023, demo machine used 1.90 m working width 3 saw blades Hydraulically driven, pressureless return required Mounting suitable for Claas Scorpion or JCB Q-fit available incl. parking supports | Internal no.: 11198883 Lodpfeuk Sghox Ad Nehb

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer with pneumatic drive can only be offered without putting into operation in our warehouse video at seller's site before dismantling available Lhjdpfxevuullo Ad Njb

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW Ljdsg Ip Efepfx Ad Nohb weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Lhjdpfxjwudhuj Ad Nob Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head Lhodpfxjvi Hrys Ad Neb spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; Lhjdpfoumhm Ajx Ad Njb ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: new, mileage: 3 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, IVECO DAILY 35S18HA8/P: * Permissible total weight: 3,500 kg * EURO VI * 8-speed automatic transmission * Factory rear axle air suspension * Central locking with remote control * Driver’s air-suspended seat * Radio with Bluetooth * Navigation system * Multifunction leather steering wheel * Electric windows * Automatic climate control * Electrically adjustable exterior mirrors * LED headlights * LED daytime running lights * Exterior color: red (other colors freely selectable for ordered vehicles) * Roof storage above the windshield * 90 l fuel tank * VDI interface for telematics system, ACC + traffic jam assist * Emergency braking assistant AEBS with City Brake * Tachograph * Electronic parking brake Platform: * Load area approx. 510 x 210 cm * Tare weight approx. 390 kg * Welded aluminum C-profile frame * Aluminum loading ramps * LED lighting on left and right integrated in the body’s exterior profile * Electric winch with radio and cable remote control Lhedpjgqndxsfx Ad Njb * Winch sliding system * Mudguards with mudflaps * Tow bar with ball head and additional socket on the platform * Work lights with switch in driver’s cab * 2 toolboxes * Optional: Integrated LED work lighting on the sides of the loading platform Load securing equipment also available: * Tensioning and lashing straps * Load bars * Warning vests * Transport boxes * Edge protectors * Load cushions * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Subject to errors and prior sale. No liability for printing or input errors.

Condition: good (used), turning diameter over cross slide: 380 mm, spindle bore: 70 mm, turning diameter: 640 mm, turning diameter over bed slide: 900 mm, Characteristics: Length between points: 2.000mm Diameter admitted on bed: 640mm Lodeudh Slopfx Ad Nohb Diameter admitted on carriage: 380mm Diameter admitted on neckline: 900mm Shank pitch: 70mm Includes: 400mm 3-jaw chuck 390mm 4 independent jaw chuck Open steady rest and closed steady rest Quick-change toolholder with 4 tool holders.