Electric 4-wheel forklift

Still RX 20-16 P / AKKU 2023 mit 89 %

Condition: as good as new (ex-display), Year of construction: 2025, 5 KW Air-cooled chiller for outdoor installation with axial fans. In standard equipment incl. p3 pump. Technical data on request . The machine is available from stock in Güglingen. We advise you gladly and free of charge for your application . We have constantly changing chillers from stock in all sizes as a demonstration machine or new partly also used . Bodofqllljpfx Ahvecw In addition, we partly take refrigeration systems in payment or buy them.

Condition: good (used), functionality: unexamined, overall weight: 80 kg, total width: 990 mm, total height: 870 mm, total length: 1,180 mm, stack height: 800 mm, tank capacity: 900 l, empty load weight: 80 kg, We hereby offer you, without obligation, around 200 used steel stacking boxes and storage containers made of galvanized steel sheet. Manufacturer: unknown Bcsdjvtckmepfx Ahvow Dimensions of the stacking box (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Note: The steel stacking boxes were used by the previous owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers was carried out using a forklift with a rotating fork. For this reason, the stackable containers are manufactured with extra thick-walled construction. Sale takes place without obligation, excluding warranty and guarantee, to commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your service team, Mertens & Frowein GmbH

Condition: used, Working width 500 mm Number of knives 4 St. Bedpfxex Eykgs Ahvecw knife system Streifenhobelmesser

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm Bsdpodmbrxsfx Ahvjcw total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,560 h, load capacity: 1,600 kg, lifting height: 4,950 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, total length: 2,114 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 Mast type: Triplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: normal Front tyre type: Non Marking Front tyre condition: 60 - 80% Rear tyre type: Non Marking Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Bcodpfx Asw U E Uushvjw Battery type: PzS Sideshift, 3rd valve, rear work light, front work light,

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 280 h, load capacity: 1,000 kg, lifting height: 4,620 mm, free lift: 1,000 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,200 mm, empty load weight: 2,200 kg, total length: 1,613 mm, drive type: Elektro, construction width: 1,030 mm, Electric 3-wheel forklift Fork width: 1020 mm ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Triplex Technical condition: very good Front tyres type: superelastic Bodex Nz Egopfx Ahvscw Front tyres condition: 80 – 100% Rear tyres type: superelastic Rear tyres condition: 80 – 100% Battery voltage: 24V Battery capacity: 500Ah Battery manufacturer: Still Battery year: 2022 Battery condition: 80 – 100% Description: Battery year of manufacture 2022; Accu YOM 2022 Sideshift, 3rd valve, rear work lights, front work lights, roof cover, windscreen,

Condition: new, Year of construction: 2025, Tapping device OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Tapping capacity max. - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Projection (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with toothed rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor three-phase current 400V with frequency converter (kW) 4.0 Stepless spindle speeds R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Manual feed Weight (kg) 400 Optional drilling package 6 (€ 890.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? Bodpfx Aod Su Agjhvocw WE ALSO STOCK OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: excellent (used), Year of construction: 1990, Make: Kunzmann Type: WF5/3 Year of construction: 1990 X - axis: 500 mm Y - axis: 360 mm Bodeffyfropfx Ahvscw Z - axis: 420 mm Clamping surface: 700 x 350 mm tool holder: SK40 spindle bore: 22 mm quill stroke: 60 mm Dimensions: approx. W 1.50 x D 2.40 x H 1.90 m Weight: approx. 1.6 t All information without guarantee. The machine is in a very good condition. A demonstration is possible at any time in our exhibition hall.

Condition: used, dimensions 1000 x 1100 mm Ideal as a floor for heavy duty shelving Bcsdpjvpr Tiofx Ahvew Pressed grating galvanized DIN EN ISO1461 Support bar: 30x2mm cross bar: 9x1,6mm Mesh: 31x31mm Edge bar: 30x3mm

Condition: new, Year of construction: 2026, Thread cutting device Undercutting device Programmable drilling depth stop Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Option R1: Infinitely variable spindle speeds with intermediate gearing, speed range 100-2000 rpm Option R2: Infinitely variable spindle speeds with intermediate gearing, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle taper MK 4 Drilling depth 160 mm Throat 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, stepless Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-reversible, 1.5/3.0 kW Weight 420 kg Bedpfx Ajd H Rh Rehvocw Option Drill Set No.6: Taper arbor B18/ MK 4, Keyless drill chuck B18/ 3-16 mm, Machine vice No. 2-140 and T-slot bolts, EUR 910.00 Option: Automatic spindle stop at upper drill spindle position, EUR 432.00 Option: Chip break module EUR 432.00 Delivery: free to site including packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – REQUEST AN OFFER! FLOTT AUTHORIZED DEALER