Warehouse technology

Still EXV SF16i

Condition: used, Year of construction: 2022, total length: 2,020 mm, lifting height: 4,350 mm, load capacity: 1,600 kg, · Bedienung Geh/Stand · Nenntragfähigkeit 1600 (2000)kg Ijdpfxoyb Tmfe Ahvjhw · Lastschwerpunktabstand 600 mm · Lastabstand 724/646 mm · Achslast mit Last antriebsseitig/lastseitig 979/1850 kg · Achslast ohne Last antriebsseitig/lastseitig 962/268 kg · Bereifung Polyurethan · Reifengröße antriebsseitig mm ⌀ 230 x 90 · Reifengröße lastseitig mm ⌀ 85 x 85 (⌀ 85 x 60) · Stützrollengröße mm ⌀ 150 x 50 · Spurweite antriebsseitig/lastseitig 534// 380/500 mm · Höhe Deichselgriff in Fahrstellung min./max. 1175/1380 · mm · Gabelhöhe gesenkt mm 86 · Arbeitsgangbreite bei Palette 800 x 1200 längs 2390 / · 2777 mm · Wenderadius 1507/1894 mm · Fahrgeschwindigkeit mit/ohne Last km/h 4,0/4,0 6,0/6,0 8,0/10,0 · Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 · Senkgeschwindigkeit mit/ohne Last m/s 0,40/0,35 · Max. Steigfähigkeit kB 5 mit/ohne Last %: 10,0/22,0 · Betriebsbremse Elektromagnetisch · Fahrmotor, Leistung S2 = 60 min kW 2,3 · Hubmotor, Leistung bei S3 = 15 % kW 3,2 · Batterie nach DIN 43531/35/36 A, B, C, nein 2PzS · Batteriespannung/Nennkapazität K V/Ah 24/230 · Li-Ion: 24/205 · Batteriegewicht ±5 % (herstellerabhängig) kg 212 · Energieverbrauch nach DIN EN 16796 kWh/h 0,84 · Art der Fahrsteuerung AC-Steuerung · Schalldruckpegel (Fahrerohr) dB(A) ≤66

Condition: excellent (used), Year of construction: 2004, Clamping force: 35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 25 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Ijdpfxjuykh Ds Ahvohw Injection pressure: 1040 bar Working hours: 34.748

Condition: new, Year of construction: 2022, total length: 2,000 mm, lifting height: 5,700 mm, load capacity: 1,600 kg, · Bedienung Geh/Stand · Nenntragfähigkeit 1600 (2000)kg · Lastschwerpunktabstand 600 mm · Lastabstand 724/646 mm · Achslast mit Last antriebsseitig/lastseitig 979/1850 kg · Achslast ohne Last antriebsseitig/lastseitig 962/268 kg · Bereifung Polyurethan · Reifengröße antriebsseitig mm ⌀ 230 x 90 · Reifengröße lastseitig mm ⌀ 85 x 85 (⌀ 85 x 60) · Stützrollengröße mm ⌀ 150 x 50 · Spurweite antriebsseitig/lastseitig 534// 380/500 mm · Höhe Deichselgriff in Fahrstellung min./max. 1175/1380 · mm · Gabelhöhe gesenkt mm 86 · Arbeitsgangbreite bei Palette 800 x 1200 längs 2390 / · 2777 mm · Wenderadius 1507/1894 mm · Fahrgeschwindigkeit mit/ohne Last km/h 4,0/4,0 6,0/6,0 8,0/10,0 · Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 · Senkgeschwindigkeit mit/ohne Last m/s 0,40/0,35 · Max. Steigfähigkeit kB 5 mit/ohne Last %: 10,0/22,0 · Betriebsbremse Elektromagnetisch · Fahrmotor, Leistung S2 = 60 min kW 2,3 · Hubmotor, Leistung bei S3 = 15 % kW 3,2 · Batterie nach DIN 43531/35/36 A, B, C, nein 2PzS · Batteriespannung/Nennkapazität K V/Ah 24/230 · Li-Ion: 24/205 · Batteriegewicht ±5 % (herstellerabhängig) kg 212 Ijdpjxtq E Iofx Ahvjhw · Energieverbrauch nach DIN EN 16796 kWh/h 0,84 · Art der Fahrsteuerung AC-Steuerung · Schalldruckpegel (Fahrerohr) dB(A) ≤66

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Ihodpfxjtyaypo Ahvsw

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ Ihsdpfxotpf N Us Ahvew - Clamping force: 55T - Working hours: 24,210

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm Ijdjlz Rvlepfx Ahvjhw ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1986, condition: ready for operation (used), A universal tool milling machine Deckel from the 1980s is available. Travel X/Y/Z: 300mm/160mm/340mm, table dimensions X/Y: 600mm/250mm, max. table load: 150kg, tool interface: SK40, speed: 2000rpm, feed rate: 1200mm/min, machine dimensions X/Y/Z: approx. 1200mm/1100mm/1500mm, weight: approx. 700kg. On-site inspection is possible. Iodpfxsygmcwe Ahvehw

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 191523, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3086- Offered here is a used injection molding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Ijdjv Tb U Dopfx Ahvshw Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine number: 191523 Screw diameter: 30 mm Tiebar spacing: Tiebarless Centering diameter: 125 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, PLC controlled grinding function, Table size 1500 x 700 mm, Table load max. 1400 kg, Ijdexywgfjpfx Ahvohw Max. spindle - table distance 800 mm (magnetic table 60 mm high), Prismatic "V" guildes & flat guides with Turcit-B coating, Spindle power 11kW, Wheel size D405 x 50 x d127 mm, Machine weight 8100 kg, Accessories and features - Electromagnetic table 1500 x 700 mm, - Automatic demagnetizing, - Automatic infeed - Portal electrical handwheel - Coolant system with paperband filtering - Magnetic separator. - New spindle bearing 1,5 years ago. Good working condition. Still in production. Located in Hungary.

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Iodpfx Ahorg Hh Novohw Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket