Scaffolding tubes

Steigerbuizen gebruikt op maat

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 1600kVA, voltage ratio 20(2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report. Cjdpfxowpb Emj Ailjgw

Condition: good (used), Year of construction: 2011, functionality: fully functional, Industrial steam boiler Brand Loos Bosch Group Model U-ND 800 Serial number 109582 Year of construction 10/2011 Total capacity: 1108 liters Cgedpsv I E Tgjfx Ailsw Steam output 800 kg per hour with Weishaupt GmbH burner Burner type WM - L10/3-A Year of construction 2011 Minimum: 250 kW Maximum: 800 kW Steam boiler dimensions: 2500 mm x 1600 mm x 1900 mm, Storage tank Achenbach GmbH Capacity: 800 liters Dimensions: 1600 mm x 850 mm x 2600 mm Control cabinet Dimensions: 1000 mm x 180 mm x 750 mm. Burner after major renovation in 2024.

Condition: good (used), Layher Allround Stand with pin 1.00m uses ring 50 Saves assembly time through the ring system and dimensional stability of components. Cgsdpfx Aew Ei Rioilsw Sturdy and reliable: Made of high-quality steel for maximum stability. Great versatility: Suitable for high scaffolding constructions and various applications. Durable design: Resistant to intensive use and heavy loads. Safety guaranteed: Meets the strictest safety requirements. The Allround system for all scaffolding applications!

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox Cgodpfx Ajharwveilow - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: good (used), the machine is in good condition, includes electrical cabinets, sharpening machine Codpovdyr Njfx Ailsgw

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 Cjdpfx Aju Dw I Ejiljgw With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Year of construction: 2026, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. We deliver and install throughout the EU. Cgedpfx Aehmfctjilow

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 0651044, color channels: 1 kleur, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 105 mm, paper height (max.): 360 mm, space requirement length: 1,800 mm, space requirement width: 1,290 mm, space requirement height: 1,650 mm, counter reading (black): 13,084,844, type of input current: three-phase, input current: 16 A, input voltage: 220 V, Equipment: documentation/manual, In exceptionally good and original condition, only 13 million prints (!) High-quality "heavy duty" B3 (35x50cm) 1-colour offset machine for high-quality streak-free printing due to typical constructive qualities; Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Cedpfx Asv Nv Sveilegw Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 3.2kW Built-in circulation pump and water tank for the damp work Dimensions L x W x H = 1800 x 1290 x 1650 mm Net weight 1,960 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220 VAC, no transformer included

Condition: good (used), functionality: fully functional, Various Layher Base Jacks Used – Adjustable Base Supports for System Scaffolding Looking for used base jacks for system scaffolding? We offer a wide range of original Layher Allround base jacks, including both fixed and tiltable versions, with different lengths such as 0.48 m and 0.60 m. These steel screw jacks provide a stable and height-adjustable foundation for your scaffold structure, even on uneven surfaces. Suitable for professional use in construction, industrial, and renovation projects. Examples of available models: • Layher AR Base Jack 0.60 m – Fixed Model For standard Allround scaffolding, coarse thread for quick adjustment • Layher Base Jack 0.60 m – Coarse Thread (Non-Branded) Cgodpfx Aow Ddavoilow Compatible with various systems, extra robust • Layher AR Base Jack 0.48 m – Fixed Model Compact design, ideal for limited build heights • Tiltable Base Jacks – Used Flexible application on slopes or uneven terrain (available on request) Benefits of Used Base Jacks: • Fully functional, professionally inspected • Made of galvanized steel, suitable for heavy-duty use • Perfect for height correction and levelling • Coarse thread for fast, precise adjustment • Excellent price-to-quality ratio compared with new material _____ International Trade via BuildingEquipment.eu Our used base jacks are not only suitable for customers in the Netherlands, but are also delivered worldwide by us. Unique advantages: • Worldwide delivery: by pallet, container, or freight carrier • Complete export documentation & bulk quotations available • Can be combined with scaffold frames, brackets, ledgers, and more

Condition: like new (used), Year of construction: 2008, dry - cast epoxy resin distribution 3 phase transformer manufactured by ABB Zaragoza, Spain, type DTE 1000/24, 50Hz, 1000kVA, 20000 ( ± 2 x 2.5 %) /410V; Dyn11, IP00, IEC losses, year of manufacture 2004 and 1996, available 2 pcs on stock, rutine test protocols. Codjxvlm Eopfx Ailogw