Transport trailer, heavy duty trailer,

Stapler >Center Fritz GmbH TPW 8000 AL - AS

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm Bledpfx Ahshzbipjvsd IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Bedped Hxx Asfx Ahveld Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Bljdsd Ixadjpfx Ahvjd Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, General information Field of application: Construction Serial number: Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Blodovl Dl Aepfx Ahvsd Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2010, pillar-mounted slewing crane: mobil arm length ca. 2500 mm weight of the machine ca. 4 t weight max. in kg 125 kg bucket net weight 430 kg Bledpfx Asmt Rpwshvsd bucket filling weight mindestens 416 kg bucket - total weight mindestens 846 kg max. wheel load 391 kg max. support load 544 kg .

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Bodjuzx T Ropfx Ahvsld

Condition: used, mileage: 167,000 km, fuel type: diesel, color: white, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, differential lock, IVECO Stralis AD 260S36 - 6x2 – 167,000 km - Euro 6: - First registration: 2015 - Approximately 167,000 km - 360 HP engine - Euro 6 - Three axles, 6x2 configuration, wheelbase 4200+1395 mm - Automatic transmission - Rear air suspension - Intelligent third axle (steerable forwards/backwards) - Gross vehicle weight: 26,000 kg - Payload: approximately 12,400 kg Features: - Differential lock, air conditioning, electric windows, electric adjustable mirrors, ABS, ASR, air-suspended driver's seat, cruise control, central locking. Bodywork: - Flatbed measuring 5.60 m - Rear-mounted Palfinger PK16001-K hydraulic crane with tip-mounted hydraulic functions, radio remote control, and rotator The vehicle is available for viewing and test drives at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona) Tel. 045-7950955. Please contact us to schedule an appointment in order to best organize visits to our premises. Bedora Dmbopfx Ahveld For further information, technical details, or to request the sale price of the vehicle, please contact our sales managers directly at +39 045-7950955. Note: The vehicle description is indicative and may contain errors or inaccuracies. Interested parties are required to verify the exact specifications of the vehicle prior to purchase. PSL Autocarri Srl declines any responsibility for any errors or discrepancies in this description. PLEASE NOTE: WE WILL ONLY RESPOND TO INFORMATION REQUESTS THAT INCLUDE THE REQUESTER'S FULL NAME AND TELEPHONE NUMBER.

Condition: used, Year of construction: 1992, x-travel 1400 mm y-travel 1200 mm z-travel 1000 mm Control ZM total power requirement 0,5 kW Bledpfoftfczjx Ahvod weight of the machine ca. 2 t dimensions of the machine ca. 2 x 1,5 x 2 m

Year of construction: 2020, condition: as good as new (ex-display), 1x drive unit with trolley 1x travelling unit with trolley and height adjustment -Centric roller block adjustment with hand crank. -Manual height adjustment, locking with socket pin - height difference 0-350 mm adjustable - Load capacity: 2.500 kg / unit - Component diameter: 200mm - 2.000mm - Rollers: PUR wheels - dim. length/width: approx. 1.900mm x 460mm - Chassis track width: 1435mm - turning speed: 0 - 2,000 mm/min Bjdpfxofxgrdj Ahvold - Operation: hand remote control and foot switch

Condition: new, machine/vehicle number: 0620, empty load weight: 2,800 kg, maximum load weight: 20,000 kg, overall weight: 22,800 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, loading space height: 640 mm, tire size: 450x300x305, tire condition: 100 %, Year of construction: 2025, operation weight: 22,800 kg, Transportwagen TPW 20 AL-AS Typ: TPW 20 AL-AS Nutzlast: 20.000 kg Baujahr: 2024: Länge Ladefläche: 6000 mm Breite: 2000 mm Höhe: 620 mm Transportboden: 40 mm Fichte Blsdpohbh Rtefx Ahvsd Lenkung: Allradlenkung-Achsschenkel-Niederflur Bereifung: 450x300 Zugdeichsel: 1.600 mm Lackierung: RAL 2000 #Schwerlasttransport #Innerbetriebliche Transportsysteme #Schwerlastanhänger 6-100 Tonnen #Schwerlastanhänger ab 3 Tonnen bis 100 Tonnen #Schwerlast Transport Plattformwagen #Plattform Schwerlastanhänger #Allradlenkung #Transportwagen #Niederflur