Cardboard packaging machine

Soco PRM-L 1210

Condition: like new (used), Year of construction: 2009, functionality: fully functional, type of input current: AC, Horizontal flowpack packaging machine by Ilapak Carrera 1000 PC C1000 Machine in very good condition - ready to work Included: - Markem Imaje Thermal Transfer Printer - Promark Labeller - Vacuum Air Extraction System Machine data: - Efficiency up to 100/min - Sealing jaw length: 325mm - Maximum product dimensions: length: 550mm, width: 300mm, height: 120mm - Adjustable forming box - 3x400V AC power supply - Computer with display in 12 languages - Machine weight: 900kg - No product/no bag system - Registration mark sensor for printed film - Possibility of connecting a printer/labeler Possibility of adapting the machine to a specific product. Ledpfx Agovrv Tle Rshp

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60-SNG L GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 110kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Ljdpfx Asflz Hfjg Rehp Transport : TWO containers. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * LOW SHIPMENT COST(TWO 40F-OT containers or TWO standart trailers) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 60 m³ / 80 m³ Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x14.500 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: ready for operation (used), Year of construction: 2007, For sale Randek line Machines are used manufactured in 2007 Lsdpowczlyjfx Ag Rshp

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Line consisting of: SIDEL Blower Model: SBO 16/16 ROUE Number of cavities: 16 Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Lhodpetu Hy Nsfx Ag Rjp Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper

Condition: new, Year of construction: 2021, functionality: fully functional, surgical mask line, high speed surgical mask line, Food Pad, wound pad, mask line The 3-ply surgical mask line , wound pad, mask production system offered here combines efficiency and safety features with a first-class meat pad, food pad, fruit pad . The integrated extra module "Single Pack" enables the food pad production machine to pack each mask individually wrapped at full speed of up to 800 pads / min. The film rolls also have an autosplice function, so that the system weld the film together on the fly while unit operation. Surgical mask line can be used as following outer layer Spunbond nonwoven middle layer is meltblown layer bottom layer is spunbond nonwoven The food pad is made up of 3 layers of non-woven material: - An outer layer of spunbond/film - A meltblown filtration layer/sap , saf , fluff, pulp absorbent layer - An inner layer of spunbond/film surgical mask line food pad meat pad fruit pad These product features are realized thanks to the use of precise welding rollers, a modern and intuitive HMI with touchscreen function for simple and clear operation, as well as web guiding systems implemented. Intelligent sensors ensure that the material levels are precisely determined. If a low material level is detected, the material is welded to one another using the autosplice function without stopping the system. Plant details: - Solid, high-quality system structure with over 25 tonnes for maximum stability - Pneumatic material winding shafts for flexible and easy exchange of the rolls - Pneumatic material winding shafts in double design for quick set-up times and convenient handling - Adjustable web tension through pneumatic modules - Autosplice function for convenient material welding at the end of the roll - Individually controlled winding shafts for maximum precision E3b2qnt - Servo driven unwinder, PLC control - Sensor technology for material presence control - Automated alarm & stop function in the event of material tear - Web guiding for maximum precision of the raw material - Large and intuitive touchscreen - The touch screen can display the diameter of the rolls, the material ratio, the servo load and alarm codes - The machine speed can be conveniently set on the touchscreen - Error messages can be tracked in the alarm and error history. These include: Lsdpsh Rwk Tofx Ag Rjhp Raw material, joining, splicing and fan defects - The production quantities and other details can be viewed on the HMI aswell Performance data: - Power consumption: on request - Power connection: 380 V / 50 Hz - Number of cycles: up to 800 masks / min. - depending on the material - Carton: depending on the packaging format - Compressed air: 6-8 bar with sufficient volume / reserve - Dimensions: 15 m x 4 m x 3 m (LxWxH) - different depending on the equipment - Weight: 25 tonnes - varies depending on the equipment System modules: - Unwinding units for spunbond, meltblown andfilm with automatic splicing unit side embossing unit - Triple folding food pad. - food pad n the side embossing unit - End cutting unit (high speed steel) - Product exit conveyor - Single pack packaging module - Security doors with sliding construction

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms Ledpfx Agstzmifo Rehp -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: used, Year of construction: 2010, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 2TMYear 2010 - Serial-No. KN 096776 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on railsDimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mmSehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lhjdpfx Asq Sbqceg Rsp On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Lhsdjtiy Ntepfx Ag Rep Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 2025, condition: new, consisting of: - Trailer - Washing Elevator KWEM 2000 - Apple Belt Press KEB 500 - 2 x 220 l tank with Hanging Sieve for Buffer Tank - Oil Pasteurizer PAS 750 - Bag in Box Filler KBF 2000 for mobile trailer - Accessories like pumps, air pressure compressor, high-pressure cleaner. . . . Lhedecl Tvgopfx Ag Rep

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver Lsdpfswbvhaox Ag Rshp no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg