Work platform

SINOBOOM AB 16 EJ PLUS

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Dujdpsxghngofx Ah Nou Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). Dsdpfx Aorahzgoh Nouu • Oil spraying system. • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. Duodpfjv T Uvzsx Ah Nsu To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: used, Year of construction: 2004, machine/vehicle number: 02919475, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock Dsdpjv N D Ewjfx Ah Njuu - Voltage fluctuations max. +/- 5 _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2000, Ateco 12 mtr Year 2000 Working height 12 m Own batteries Working well Dedpfx Ajxxdmcsh Neuu No license plate

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 3,800 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 40 Condition: New machine Dsdpfx Ajw Eqc Tsh Neuu Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% Description: - FEM carrier incl. forks and load hook - € 2.650,00 - Earth bucket 2200 mm 1 m3- - € 1.998,00 - Adapter Euro mount - € 1.339,00 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, air conditioning, CE certificate, exterior mirrors, joystick, rotating beacon, windshield wipers, LED, Specifications: -load capacity 3800kg -lift height 10,0m -MAX gradeability 40% -unladen weight 7330kg -engine KUBOTA 79,5kw ( 107 HP ) -capacity 3769 cm³ -exhaust standard Tier4f -steering all-wheel steering / crab steering / front wheel steering -rear hydraulics - 40 km/h -air conditioning -air suspension seat -carrier plate with hydraulically operated quick coupler -steering indicator light

Condition: new, Year of construction: 2026, Double line and fitting drilling machine in SYSTEM 32. Line boring machine with 2 drilling units each with 25 precision drilling spindles. Short introduction: • Row of holes as well as line drilling in the SYSTEM 32 mm • 50 (2 x 25) holes in one drilling cycle Djdpfx Ahjdxz Ntj Neuu • Drilling depth correction for different drilling depths • Massive precision drilling unit from GANNOMAT • Furniture connector and hinge drilling (option) • Optional 3rd drilling unit

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 5,421 h, load capacity: 3,800 kg, lifting height: 15,740 mm, fuel type: diesel, construction height: 2,850 mm, fork carriage width: 1,500 mm, empty load weight: 12,650 kg, total length: 4,700 mm, drive type: Diesel, construction width: 2,290 mm, Rotating telehandler Djdpfexir Enjx Ah Nouu Fork width: 125 mm Fork thickness: 50 mm Mast type: None Technical condition: good Front tire size: 405/70-20 Rear tire size: 405/70-20 Full cabin, safety light,

Condition: used, functionality: fully functional, fuel type: diesel, lifting height: 17,550 mm, mast type: telescopic, Year of construction: 2015, operating hours: 1,850 h, construction height: 2,500 mm, drive type: Diesel, load capacity: 4,000 kg, machine/vehicle number: G 5363, Rigid telescopic forklift Chassis number: G 5363 Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Duodpfx Asu D Tm Dsh Neu Front tires Type: Pneumatic Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Condition: 60 - 80% Roof cover, windshield, heating, full cab,

Condition: used, Year of construction: 1980, for machining aluminium, plastic and steel Milling area 100 x 250 mm Three-phase motor 1 HP 12,000 rpm 380 Volt Location: Nattheim Dedjw Ulcxspfx Ah Njuu