Siemens engine 75kW

Siemens 1PH8186-1MD23-1AA1

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Nlodpfjk Dz N Isx Ad Ssc max turning diam 1100mm range of turning diam 460-1250mm

Condition: good (used), Year of construction: 2000, Ref. -No.: 10623 Manufacturer: WEILER Type: E90 x 4500 Year of construction: 2000 Type of control: CNC Control: SIEMENS D1 - Zyklen Storage location: Halberstadt Country of origin: Germany Bed width: 600 mm Turning Length: 4500 mm Swing Diameter Over Bed Slide: 900 mm Spindle Bore: 128 mm Max. Torque: 6000 Nm Feed Capacity - Z: 20000 kN Feed Capacity - X: 20000 kN Rapid Speed: 10/5 RPM Tailstock Quill Diameter: 140 mm Tailstock Quill Stroke: 300 mm Lathe tool dimensions: 32 x 25 mm Front bearing diameter: 178 mm Nsdpjy Ed Rqjfx Ad Solc Circumferential diameter over facing slide: 530 mm Spindle head according to DIN 55027 (size): Gr. 11 Tailstock inner cone: MK 6 / 140 Type Machine length: 6900 mm Machine width: 2600 mm Machine Height: 2150 mm Weight Of The Machine Ca.: 10,5 t Further information: The machine can be viewed while powered up.

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min Njdpfxeu N D Rqj Ad Selc table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: excellent (used), Year of construction: 2008, Machine is stocked in our Bulgaria Plovdiv showroom Nledpfxenyh Rwo Ad Sjc Spindle bore is 254 mm Machine has hydraulic turret system Hydraulic tailstock machining length is 4000 mm Swing over bed:1070 mm Swing over cross slide: 680 mm Fanuc control system Machine have steady rests. IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Nlodpfsyagidex Ad Sjc Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Max helical angle 45° Nsdpfowdmy Esx Ad Selc Internal and external Head. 44/50 kW.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 5,400 mm, travel distance Z-axis: 900 mm, feed length W-axis: 900 mm, spindle diameter: 200 mm, travel distance W-axis: 2,000 mm, table load: 40,000 kg, table length: 2,500 mm, table width: 2,000 mm, year of last overhaul: 2022, power: 140 kW (190.35 HP), Equipment: rotational speed infinitely variable, We offer a Skoda Skoda W200H boring machine from the year 1992, in very good condition. Manufacturer: Skoda Model: Skoda W200H Year of manufacture: 1992 Condition: very good Category ID: 1601 Type ID: 1276 Type: Boring machine Nodpfx Adeymnv So Solc If you have any questions or need further information, feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. Njdpfxobatame Ad Solc The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, controller manufacturer: FANUC, controller model: 31i-B5, overall weight: 2,250 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis FANUC Robodrill D21MIB 5ADV Plus was manufactured in 2023. It features a high-torque spindle capable of 10,000 rpm and a robust automatic oil lubrication system. The machine includes a center-through coolant system and a servo turret for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill D21MIB 5ADV Plus vertical machining centre we have for sale. Contact us for further details. • Mechanical unit: D21MiB5 • Spindle: BIG-10000-MAS-CTC • Spindle motor: high torque CTC • Center-through coolant system (CTC) • Air blow center-through • Flood coolant piping • CTC coolant piping • Automatic oil lubrication system • Servo turret: BT-T21-MAS • Compact flash card adapter • Operator panel: English • Internal LED lighting • Designation of control axes • Designation of two additional axes • Parameter setting: 4th axis possible • Parameter setting: 5th axis possible • High column: 300 mm • Spindle head full cover • Z-axis single plate cover • Splash protection enclosure • Air-through CTC kit • Transformer: 20 kVA IP23 • Base machine only: approx. 2250 kg • Condition: New machine • Warranty: 1 year Additional equipment Nlodpfx Ajy E Iknod Ssc • Robot interface 2 without hub • Robot connection function • Additional I/O: DI/DO 48/32

Condition: used, Year of construction: 1974, x-travel 9700 mm y-travel 3500 mm z-travel 640 mm w-axis 3000 mm Control Siemens type 840D PL spindle diameter 200 mm Spindle capacity 85 Kw surface area 9000x2800 mm Table load 40000 kg Nlodsyq Sxljpfx Ad Ssc column daylight 3400 mm high speed spindle taper ISO 50 weight of the machine ca. 193,8 t dimensions of the machine ca. 22,4x10,2x8,2 m Retrofit 2009 Steep taper ISO 60 DIN 2079 Speed ??12-450 rpm Milling heads: 1x WF 680/450 1x WFU 180/350 1x WFU 70/300 1x 550 mm extension for WFKs The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team