Generator set

SDMO

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. Gedowu Dbuspfx Agbobg The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 Gbodpswc A Shsfx Agbjg milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The GEA CFS Autogrind 280 is a powerful industrial grinder built for high-performance applications, particularly in meat processing. Designed to work with frozen blocks up to -25°C Key Features: Enhanced Power: The 117 kW motor delivers increased grinding performance, enabling faster processing of both frozen and fresh meat blocks. Processes frozen blocks at temperatures as low as -25°C without compromising quality or texture. Suitable for a variety of raw materials, including beef, pork, poultry, and fish. The upgraded motor supports even higher production rates, making it ideal for large-scale industrial use. Features a 280 mm throat with robust cutting plates and knife options to ensure uniform particle size. Suitable for fine or coarse grinding, depending on your needs. Integrated block pusher and feeding system reduce manual labor and improve efficiency. Made from stainless steel for easy cleaning and compliance with stringent hygiene standards. Smooth, crevice-free surfaces minimize contamination risks. Minimizes heat generation during grinding to maintain product integrity and comply with food safety regulations. Safety interlocks and overload protection mechanisms safeguard both the operator and the equipment. Intuitive control panel for easy operation and monitoring. Despite its high power, the design is optimized to consume energy efficiently during continuous operation. Processes frozen and fresh meat for various end products such as: Minced meat Gsdpjvt R A Defx Agbebg Burgers Sausages Nuggets Other meat-based products This model is an excellent choice for high-demand production environments requiring consistent quality and reliability.

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Gbodpoxlkq Ujfx Agbog Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Gbedpfxsi Nthqo Agbog Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Condition: excellent (used), Year of construction: 2015, usable tank capacity: 500 l, Heatable mixing tank Volume: 500 liters Year of manufacture: 2015 Condition: Excellent The tank is equipped with a fully functional agitator and a pressure jacket. The water circuit of the double jacket features a heating element and a circulation pump to circulate the water within the jacket, ensuring that the product in the tank is heated quickly. Provision for an inlet/outlet pump is available; the controls are already installed in the control cabinet. Gjdpfxsw Dr I Ie Agbobg Suitable for heating liquids up to just below boiling point. Technical drawings available. Dimensions (LxWxH): 1500mm x 1100mm x 2050mm

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, Gbedjwa Dx Ropfx Agbog - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: used, Technical details: rated capacity: 16,5 kVA rated current: standby: 72 A type of fuel: Diesel tank capacity: 66 l rated voltage: 230 / 1 Phase V rated frequency: 50 Hz dimension machine xH: 1,7 x 0,9 x 1,3 m weight of the machine ca.: 0,72 t Gbodpju Nu Utjfx Agbeg Engine: Perkins Diesel; type 404D-22G; 4 cylinders; speed 3000 rpm; water-cooled; battery 12 VDC-NEG Generator: 230V, 1 phase; 72 A; protection class IP 23; speed 1,500 rpm; excitation voltage 20.6V and excitation current 1.68A; insulation class H Ambient temperature: +25°C *

Condition: used, Telescopic loader Haulotte HLT 3614 Year of construction 2012 Lifting height 13.60 m Gbedevzmq Hepfx Agbog Lifting capacity max. 3.6 tonnes Operating hours approx. 3950 hours Dead weight 12,400kg Deutz TCD 2012 L04 2Vm engine with pallet fork Tyres very good The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers!

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Gbsdpovca Izofx Agbog Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.