Hydraulic lifter 1000t

Schiess Defries 172 | 18442168

Condition: used, Technical details: Ksdpfx Aevz Abhjh Njll welding current: 500 A weight of the machine approx.: 128 kg dimensions L x W x H: 1,2 x 0,8 x1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 4.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm *

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Lifting height 9 meters Kljdpfx Aeqiz N Roh Nol

Condition: good (used), Year of construction: 1980, travel distance X-axis: 1,985 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 1,330 mm, table load: 10,000 kg, table length: 1,700 mm, table width: 1,520 mm, incl. universal milling head incl. spindle extension incl. angle plate height 1400 mm incl. digital read out sytem X - Travel: 1985mm Y - Travel: 1620mm Kljdpfxewrn Ims Ah Nel Z - Travel: 1330mm W - Travel: 410mm Table Length: 1700mm Table Width: 1520mm Table load: 10000 Speeds / ranges:2,5 - 1000Rpm Spindle Taper: iso 50ISO/Bt/Mk Length: 460mm Width: 4800mm Height: 6000mm Weight: 25000kg

Condition: ready for operation (used), functionality: fully functional, power: 78 kW (106.05 HP), fuel type: diesel, Year of construction: 1992, operating hours: 10,027 h, Equipment: cabin, Tire size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22000 kg Load hook: 20000 kg Boom design: upper section 3500 mm / lower section 3500 mm / intermediate section / 3000 mm / intermediate section 1500 mm Basic equipment: with 4-point sliding beam support Kjdpervgyxjfx Ah Noll Engine manufacturer / type / power: Deutz / F6L 912 / 78 kW Max. Load capacity: 25000 kg Extension length: 11500 mm

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Klodecblc Sepfx Ah Nol Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Kedpjkwcdbsfx Ah Noll Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1969, faceplate diameter s mm swing diameter 1000 mm turning height 1000 mm Klsdpfx Ahev Dx Dko Nol weight of the machine ca. 5 t

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm Klodpfx Ajfc R D Ajh Njl -Weight: 49 kg

Condition: used, Year of construction: 1987, pressure / t Klsdjuddcaspfx Ah Njl stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: excellent (used), Year of construction: 2008, 300 Kg load capacity welding rotary table, with hollow shaft diameter 125mm with jaw chuck 320mm or 400mm very robust speed infinitely variable from 0,15 to 5,0 rpm current transmission 350 A diameter rotary table 400mm inclination up to 135 Kjdpfslamtbsx Ah Njll height horizontal 835mm, tilted to center approx. 735mm length 850 mm x width 580 mm