Recycling

SALUR HİDROLİK MAKİNE SLR

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Kjdpfxsic Rl De Afgolt Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: new, functionality: fully functional, power: 5 kW (6.80 HP), fuel type: electric, empty load weight: 4,200 kg, Year of construction: 2024, filling bunker with bunker gutter bunker capacity 10.5m³ S355 / St52-3 Kledpfxouqynms Afgot vibratory feeder with 10mm Hardox 450 wear plate gutter fully stress relieved annealed 2 x imbalance motors 2,5kW NEW

Condition: excellent (used), Year of construction: 2019, Type: TS 1.8x10.5 Year of manufacture: 2019 Only approx. 2,900 hours, TOP condition Length: approx. 10,050 mm Diameter: approx. 1,800 mm Fractions: 4 plus riprap / oversize material Screen 1: 100x100 mm mesh, product 0-100 mm Kledpfxex Ei Sgs Afgjt Screen 2: 120x200 mm mesh, product 63-180 mm Screen 3: 270x270 mm mesh, product 5-40 kg (90-250) Screen 4: 420x340 mm mesh, product 10-60 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, Ksdsv T I Evspfx Afgolt We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), Year of construction: 1981, functionality: fully functional, Equipment: documentation/manual, Automatic channel baler BOA Continu 25 LB + conveyor belt. The baler is in good condition and has been regularly serviced. Recently, the Denison pump underwent a complete overhaul. Fully functional and in continuous operation. Please contact us for further information. Kedpfxew S Tv Us Afgelt

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera Ksdpfeyh A Iisx Afgolt LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Year of construction: 2017, condition: excellent (used), machine/vehicle number: PO3503522, very high capacity overbelt magnet length overall = 3610 +0/-100 | magnets = 1600+800 Ksdoivdg Dopfx Afgjlt width overall = 2240 | belt = 1600 | cleats = 1500 height = 1120 weight = ca 8000kg electro pick up magnet 10kW, enclosed, oil cooled belt drive SEW, 5,5kW belt speed 1.35m/s

Year of construction: 2018, condition: ready for operation (used), This MAYPRO LC2 was manufactured in 2018. It features an industrial PC with proprietary software, PLC integration, and can produce up to 2,000 pallets per 8-hour shift. Minimum and maximum pallet dimensions are 600 mm x 600 mm and 1,500 mm x 1,500 mm, respectively. It includes an automated wood feed system, multi-head nailing, and an integrated stacking system. Total installed power is 20-40 kW. Contact us for more information about this machine. Application Types Kedpjx Hlh Tjfx Afgelt Complete Production

Condition: used, 2 Pcs. “Goudsmit 1.500mm.” for Sale Manufacturer: Goudsmit Magnetics Belt widthness: 1.500 mm (New belt) Kjdpfx Afew R N Taogjlt Included: – New Control-unit Eddy Current Separator will be overhauled, sandblasted and painted.

Condition: like new (used), Year of construction: 2019, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 10804, overall weight: 3,800 kg, rotor diameter: 500 mm, number of blades: 5, total length: 2,100 mm, total height: 3,878 mm, total width: 2,283 mm, rotor width: 1,000 mm, power: 52.5 kW (71.38 HP), filling opening width: 1,200 mm, filling opening length: 1,200 mm, input voltage: 400 V, Includes 1 set of new knives, various screens, extraction fan, and cyclone filter. Klodpfxsyrc E Es Afgst