Truck aerial platform

Ruthmann Ecoline RS240

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Crodovmz N Ujpfx Ab Tok Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, power: 33 kW (44.87 HP), overall weight: 1,570 kg, fuel type: diesel, color: original, axle configuration: 1 axle, fuel: diesel, Schliesing 325EX‑D chipper: The compact one with a rotating chipping unit The Schliesing 325EX‑D chipper is a powerful wood chipper that is ideal for demanding wood chipping applications with its powerful motor, flexible feed options and robust design. With a pivoting feed hopper and a variety of safety features, it meets the highest standards and offers an efficient solution for processing logs up to a diameter of Ø 20 cm. Technical data: Type: Schliesing 325 EX Logs: Up to Ø 20 cm Feed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Kubota common rail turbo diesel engine with DPF, output 33 kW / 44.9 HP. Industrial freewheel clutch between engine and chipping disc to protect the engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with EU homologation. Robust, fixed sheet steel fenders. Device for support wheel at the front and parking support at the rear. Lighting in accordance with StVZO with impact-protected components. Pneumatic tires 205/65 R15C with EU homologation. Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth. Fully galvanized hopper flap for durability. Hopper dimensions (inside): width = 1,040 mm, height = 960 mm. Pivoting blow-out pipe with adjustable spreading flap. Blow-out pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping mechanism: Rotatable chipper housing with adjustable input angle of 270°. Safety circuit in accordance with EN 13525. Chipping disk with a diameter of Ø 655 mm and a thickness of 35 mm. Closed blade system for quick and safe blade changes. Continuously adjustable chipping knives, can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size. Csdpfxjv Ev E Ue Ab Tork Fill level indicator for the hydraulic oil tank.

Condition: refurbished (used), Year of construction: 2018, operating hours: 135 h, functionality: fully functional, working width: 750 mm, area performance: 4,500 m²/h, overall weight: 330 kg, total height: 1,470 mm, total width: 810 mm, total length: 1,525 mm, water tank capacity: 95 l, battery voltage: 24 V, The Kärcher B95 RS R75 dates back to 2018 and has only logged 135 operating hours. We completely overhauled it, including installing four new maintenance-free gel batteries, which can be conveniently charged using the integrated charger. It features a roller brush deck, which is particularly suitable for coarse dirt particles such as wood splinters. The wood splinters are swept into a separate coarse dirt container behind the roller brushes, reducing the amount of particles that can cling to the squeegee and impair the suction performance. For efficient use of cleaning agents, the machine features a chemical dosing system that automatically adds cleaning agents to the cleaning process. As a stand-on machine, the operator has a very good overview of the machine, and the maneuverability of the Kärcher B95 RS makes it easy to clean even narrow aisles and similar areas. Credswa Syvopfx Ab Tek It is perfect for medium-sized areas such as shops, warehouses, or workshops, etc. Technical specifications: Working width: 750 mm Fresh water tank capacity: 95 liters Theoretical area performance: 4500 m²/h Weight: 330 kg

Condition: used, Year of construction: 2024, Truck working platform Crodpfx Ajvb Rdweb Tok

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 250 kg, mast type: duplex, Typ: GSR B240PX COMPACT Condition: NEW Year of manufacture: 2025. Working height: max.23.7m Side reach (250 kg): max. 8.25 m Side reach (80 kg): max. 12.3 m Basket load capacity: max. 250 kg Swivel basket: 2 x 70 º Codpfx Aoxvx S Usb Tork Working range: 450 º Aluminum basket dimensions: 1.4m x 0.7m Color: white 4 hydraulic stabilisers Maximum truck load capacity: 3500 kg (B-kat.) All components are exclusively of EU origin. Warranty: 24 months. PRICE 99.500,- € 10% discount TOTAL PRICE 89.550,- € ACTION PROMO PRICE

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,625 h, Year of manufacture: 2019 Operating hours: 3,700 Mileage: 39,500 km Technical Data: Max. working height: 27 m Outreach: 18.10 m Max. lateral outreach: 15 m Basket load capacity: 250 kg Permissible leveling inclination: 5° Credpjv I T Rmjfx Ab Tjk Work platform size: 1.40 x 0.70 m Work platform load capacity: 250 kg Carrier vehicle wheelbase: 3,665 mm Slew range: 2 x 225° 3 movements possible simultaneously: lifting, slewing, telescoping + basket rotation +++NEW PRICE €189,500.00 net plus 19% VAT+++ This offer is non-binding. No guarantee for equipment details. Errors, changes, and prior sale excepted.

Condition: used, Year of construction: 2023, - Brand : Comet - Type: Leopard 21 - Year of construction: 2023 Crsdpfxowhiyps Ab Tok - Weight: 2500 kg. - Hours: 7 hours - Drive: Petrol + 220 volts - Working height: 21 meters - Lateral reach: 9.2 meters - Lifting capacity: 200 kg. - Remote control - Adjustable tracks - Rotatable work tray - New safety inspection - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Comet *Type: Leopard 21 * Construction year: 2023 * Weight: 2500 kg. * Hours: 7 hours * Drive: Petrol + 220 volts * Working height: 21 meters * Lateral reach: 9.2 meters * Lifting capacity: 200 kg.

Condition: used, Year of construction: 2010, operating hours: 4,524 h, Telescopic chain work platform Teupen Leo 25 plus, AH 25 m * Platform height 23 m * Working height 25 m * Lateral reach 15m 200kg, 18m 80kg * Year of manufacture 2010 * 4524 hours according to counter * Telescopic aluminum construction * Drive via 3 cylinder Kubota diesel engine + 230 volt light current * Hydraulic 4 point support variable * Support dimensions 6000 x 5600 * Chain size 1660 x 240 * Profile depth 14 mm * Overall dimensions 7600 x 1750 x 2200 mm * Weight 3760 kg * Basket load 200 kg * Basket dimensions (L x W x H) 780 x 1150 x 1100 mm Crodpfx Aoqxcvmsb Tsk * Basket and Ground control * Adjustable drive * Hydraulic basket arm 930 mm * Rotatable basket We will be happy to send you more information and pictures on request. This description does not represent a binding offer and may contain errors. No guarantee for all information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 950 h, load capacity: 300 kg, mast type: free lift with telescopic boom, overall weight: 7,490 kg, fuel type: diesel, color: white, Equipment: ABS, The truck-mounted work platform 20m 3.5 t can be operated with a standard category B driving licence and is ideal for all tasks at heights. Delivery of the work platform is possible but will be invoiced separately. Crsdpfjxvmn Rex Ab Tok

Condition: excellent (used), Year of construction: 2015, operating hours: 2,088 h, fuel type: hybrid, color: blue, Drivetrain Make of engine: Honda Weights Empty weight: 1.900 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 740 m Transport dimensions (LxWxH): 4,325x1,4x2 Latest inspection: 2024-11-15 Production country: IT Credpfxexpfyxs Ab Tjk Additional information Please contact Vink Machinery for more information Bluelift SA16 * 2015 * 2088 working hours * Petrol and 230-volt drive * Remote control * Rotating basket * Automatic outrigger * Coming-home function * Removable basket * 78 cm clearance * 16-meter working height * 7.4-meter horizontal reach * 230 kg lifting capacity * 1900 kg net weight * Includes all documents