Other

Porsche Traktor Master 419

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Itsdpfxjv N Hc Sj Affor

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth Itjdpfxevmz N Uo Affjr

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². Iodpsul Uizefx Affotr 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Condition: used, machine/vehicle number: 1410A, mileage: 86,487 km, power: 93 kW (126.44 HP), first registration: 07/1994, fuel type: gasoline, fuel consumption (combined): 14 l/100km, color: green, gearing type: automatic, emission class: euro1, Equipment: all wheel drive, trailer coupling, TUV and AU are made NEW and gets a green environmental badge :-) Special army version with long wheelbase, the Mercedes-G is in a super good condition, even the body is in a good condition! unimaginable how the Swiss manage that) The top is super fast from PKw with 8 seats to pick-up with 2 seats to convert, there are about 10 G-models of this export train in stock, the interior isL/W/H 1760/1520/1250, immediately ready for use, directly from the military very well maintained and maintained!!! Equipped with: 2850mm wheelbase, automatic with 4 gears plus off-road reduction, four-wheel drive, 4-cylinder gasoline engine with 2299cm? The fuel consumption on the highway is about 13 liters per 100km and on short distances just under 15 liters (this information I got from my customers), rear axle lock, (truck registration possible then only 2 seats in front), good tires 205R16, and much more. - We also have some accident vehicles in stock at favorable prices! - Ideal as a rally vehicle or hobby vehicle, also as a vehicle for hunting just great, to the G I also have the matching 1-axle off-road trailer with overrun brake on offer, - Several other all-wheel drive vehicles and other military vehicles are still available in my offer. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Iodpfoqx Sybsx Affjtr

Condition: new, power: 18 kW (24.47 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 1,810 kg, total length: 2,895 mm, empty load weight: 1,300 kg, maximum load weight: 510 kg, suspension: other, number of seats: 1, Equipment: all wheel drive, differential lock, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, hydrostatic transmission, 3-cylinder, 20 km/h, differential lock, power steering, 1 seat, analog fuel gauge, rear swiveling work lights, 2 front weights at 15 kg each, roll bar with beacon, cross-ply tires front: 6.0-12, rear 8.30-20, overall length 2,895 mm, weight 1,300 kg, permissible total weight 1,810 kg. Turf tires available for an extra charge of €500.00 net. FOR US, CONDITION AND FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller by phone. EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE POSSIBLE. All details provided without guarantee. For more offers, visit our homepage. The description and data provided do not constitute a warranty and are not binding. The only binding agreement is the purchase contract signed at our dealership. Subject to errors and prior sale! Isdpfx Aewtpvzoffjtr

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Itjdsv Evx Ujpfx Affsr Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Year of construction: 1998, condition: good (used), machine/vehicle number: PM 1000_01, 1x polishing machines for robot processing sold. Execution 1 x left Manufacturer: SHL polishing wheels DM - 1000 mm drive power 7,5 kW Infeed suction flap Itodod S R Agjpfx Affer

Condition: new, Year of construction: 2025, cutting speed 35 m/s grinding height 210 mm workpiece length / mm weight of the machine ca. 210-260 kg required space 1100 x 760 x 860 mm The G115 Surface Grinder is a compact grinding machine designed for processing the circumference or face of the grinding wheel on the horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, inclined or shaped surfaces can also be processed. The machine is ideal for small businesses, maintenance industries, home workshops, laboratories, teaching demonstrations, and more. Itsdpevuuvksfx Affsr TECHNICAL DATA Maximum cutting amount: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal stroke of the worktable: 340 mm Transverse travel of the worktable: 170 mm T-slot of the worktable: 1-12 mm Outer diameter × inner diameter × thickness of the grinding wheel: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical feed handwheel interval: 0.025 mm Lateral feed handwheel interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Package size: 1100×760×860 mm FEATURES The worktable can be moved back and forth as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. The grinding head runs smoothly. Compact design with low noise. The machine is lubricated by a manual oil pump. To lubricate, simply pull out the handle. Work cabin is available separately. If you need any other special accessories to improve work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: From the proximal end of the main spindle to 100 mm, the radial runout of the tapered hole axis is 0.01~0.02 mm.

Condition: used, Year of construction: 1985, operating hours: 3,500 h, Please contact ATS Norway for more information Please provide reference number upon request: 20847 Specifications: Itjdpfx Afswvzfysfer Model year: 1985 Hours: approx. 3,500 Rear tire size: 18.4-26 Support legs Hydraulic tilt Digging bucket included Control panel for drill tower Description:JCB backhoe loader from 1985, sold with mounted drill tower and associated control panel.A digging bucket is included.According to the owner, all machine functions are working properly.The rock drill was replaced a few years ago.The compressor reportedly delivers slightly low air pressure.Quick delivery possible. Hours: 3500 Own weight: 8000 Model: Traktorgraver

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 170 h, functionality: fully functional, machine/vehicle number: MKS20728, power: 36.8 kW (50.03 HP), overall weight: 560 kg, color: yellow, Technical data: TYPE Schliesing 175MX LOGS: Up to Ø 16 cm FEEDING WIDTH 24 cm DRIVE POWER 18–36.8 kW / 25–50 HP WEIGHT approx. 560 kg 3-point rear attachment (540 rpm) Operating hours: approx. 170 Logs up to 16 cm Iodpfxovmz Rxj Affetr Feeding width 240 mm Basic weight approx. 550 kg Recommended drive power: 18–36.8 kW (25–50 HP) Cardan shaft with freewheel. Properties: Drive and attachment: Wood chipper with PTO drive. 3-point rear attachment with an operating speed of 540 rpm. Recommended drive power from 18 to 36.8 kW (25 to 50 HP). PTO shaft with freewheel for safe operation. Fully galvanized, light and solid base frame for stability and durability. Housing/hopper/blow-out pipe: Foldable intake hopper with a minimum input depth of 1,500 mm. Hopper dimensions (inside): width = 890 mm, height = 720 mm. Fully galvanized, light and stable base frame for optimal support. Pivoting blow-out pipe with adjustable spreading flap for precise blowing. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Two control units (right and left) and three emergency stop buttons for increased safety. Chipping mechanism: Safety circuit in accordance with EN 13525. Chipping disc with a diameter of Ø 655 mm and a thickness of 30 mm. Closed blade system for quick, safe and precise blade changes. 2-blade chipping disc with continuously adjustable blades. Chipping knives can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size.