Construction machine

Perii PALETY 1200x1100x40

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Codpfx Akstvau Ascsrb Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, Year of construction: 2024, The Just Lift JL250 to JL750 crane from Just Lift has been designed to speed up and optimize all lifting and logistics operations, increasing productivity while ensuring maximum safety and ergonomics for the operator. - Motorized tiller head guidance - Arm control with remote controls - Hydraulic lift and extension - Anti-tipping system as standard - 100 % electric Max. Forward travel speed km/h 4.0 Max. Reversing speed km/h 4.0 Lifting system Max. Load capacity kg 250 to 750 No. Operator 1 Arm lifting speed mm/s 22.00 Arm descent speed mm/s 15.00 Arm extension speed mm/s 7.00 Arm return speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Codpfxjh Tx R Ts Akcjrb Oil quantity l 2.00 Weight without batteries kg 610 to 1,080 Weight incl. 105/130A AGM batteries kg 680 to 1,146 Length max mm 2,835 Length min mm 1,891 Width mm 980 Height handlebar/drawbar mm 1,229 Height max mm 3,030 Height min mm 2,313 Lifting height max mm 3,010 Wheelbase mm 1,000 Turning circle mm 1,050 We can currently only offer new equipment.

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service Cjdpsb A Ny Eefx Akcorb -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Condition: used, Flow steam generator with 13,2 kW Electricity: 400 V Crjdjxyttbepfx Akcob Pressure steam max.: 2,5 bar Сapacity:  approx. 20 kg/h steam

Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S130-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 130m³/hour freshly compressed concrete Mixer Capacity : 4500/3000 lt (3m³ Compressed Concrete) Total Motor Power : 168kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 130 m³/h Air Compressor Capacity : 1300 lt/min Aggregate Hopper : 4 Bins:4×30 = 120m³ Mixer Type : TWIN Shaft (3m³). 4500/3000 lt capacity Aggregate Conveyor Band : 1000 mm * 32000 mm Weighbridges: Aggregate/ Cement /Water/ Additives Crsdjflz Idjpfx Akcsb OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, axle configuration: 3 axles, first registration: 03/2009, color: other, Year of construction: 2009, Empty weight: 7.300 kg Axle 1: left 8 mm right 8 mm Axle 2: left 7 mm right 7 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!  Credpfsv Tcqtsx Akcsb

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH planetary concrete mixers enable the production of homogeneous concrete in a short time thanks to their high-performance mixing technology. In planetary mixers, the mixing arms rotate both around their own axis and around the center, ensuring that every part of the mixture is processed evenly. Thanks to this unique design, it is possible to produce concrete with a perfect consistency in as little as 30 seconds after adding water. Planetary mixers stand out from classic twin-shaft mixers with their energy efficiency, cement savings, and superior durability. Planetary Concrete Mixer Technical Specifications MODEL: CPLN - 0.5 Loading Volume: 750 liters Fresh Concrete Volume: 625 liters Compacted Concrete Volume: 500 liters Motor Power: 18.5 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 0.75 Loading Capacity: 1000 liters Fresh Concrete Volume: 875 liters Compacted Concrete Volume: 750 liters Engine Power: 30 kW Bottom Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1 Loading Capacity: 1,500 liters Fresh Concrete Capacity: 1,250 liters Compacted Concrete Capacity: 1,000 liters Engine Power: 45 kW Lower Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1.5 Loading Volume: 2,250 liters Fresh Concrete Volume: 2,000 liters Compacted Concrete Volume: 1,500 liters Motor Power: 2 x 30 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 10 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard Cjdpfx Akexpkfmjcsrb MODEL: CPLN - 2 Loading Volume: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Bottom Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 12 mm ST 52 Mixing Arm Wear Plates: 30 mm Ni-Hard Why Choose CONSTMACH Planetary Concrete Mixers? CONSTMACH manufactures mixers that deliver maximum performance even under the most demanding production conditions, backed by years of engineering experience. Each model is equipped with high-quality materials and CE-certified motors. Our planetary mixers secure your investment with low maintenance costs, high mixing efficiency, and a long-lasting design. Additionally, optional chrome carbide coatings, additional discharge covers, and different mixing arm options ensure full compliance with your production needs. For professionals seeking durability, efficiency, and technical excellence, CONSTMACH Planetary Concrete Mixers are the smartest investment choice in their class. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), Year of construction: 2019, laser power: 8,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 130 mm, overall weight: 14,000 kg, total height: 2,250 mm, product length (max.): 10,500 mm, number of axes: 3, This 3-axis LVD Phoenix FL 3015 was manufactured in 2019 and features an 8 kW IPG laser source, capable of handling sheet sizes up to 3000 × 1500 mm. It boasts a rapid positioning speed of 140 m/min and can support a maximum sheet weight of 900 kg. If you are looking to get high-quality cutting capabilities, consider the LVD Phoenix FL 3015 machine we have for sale. Contact us for more information. • Laser source: IPG • Maximum sheet size: 3000 × 1500 mm • Positioning speed (X–Y): 140 m/min • Positioning accuracy: ±0.050 mm/m • Repeatability: ±0.025 mm • Maximum sheet weight: 900 kg • Electrical consumption: 28.1 kW/h • Compressed air consumption: 30 Nm³/h • Cutting gases: Oxygen (O₂) / Nitrogen (N₂) • Gas pressure: min. 12 bar – max. 32 bar • Ground resistance: < 10 Ohm Crjdjx S Sklopfx Akcsb Additional equipment • Interface for third-party automation system LM4400 • Automatic nozzle changer LM5130 • Automation cleaning unit LM5600

Condition: used, Year of construction: 2025, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 250.000 kg Identification Serial number: 52509756 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 80000 Cjdpfxox Sch Ij Akcsrb Transport dimensions (LxWxH): 15.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Cedpfx Aox Dnb Uekcsrb Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.