Mobile crane

Palfinger Autolaadkranen / vrachtwagenkranen / kranen Cra...

Condition: used, color: yellow, first registration: 01/1995, * Manufacturer: HYSTER, * Model: H2.50XM, * Serial number: D177B22181S, * Attachment: S/S 2.00-1.50 1067 mm, * Year of manufacture: 1995, * Drive: Diesel, Dsdpfoi Tfapox Akvekr * Operating hours: 18151.8 h, * Unladen weight: 4265 kg, * Mast tilt: 6 degrees, * Tire size: 7.0 x 12 (front), 6.0 x 9 (rear), * Tire pressure: 0 (front / rear), * Track width: 1125 mm, * Load capacity with vertical mast and attachment as specified above, * Lifting height: 5550 mm, * Load capacity: 2040 kg at 500 mm, 1860 kg at 600 mm, 1710 kg at 700 mm. Subject to changes, prior sale, and errors.

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Dksdpfxsw Rm Sao Akver Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels Dsdpfxsu R A Dls Akvjkr *

Condition: used, Year of construction: 2003, Technical details: Dkjdpfou Idhyjx Akvjr bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system Dedpfx Akjt Akt Rovjkr PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: used, Year of construction: 2023, Equipment: compressed air brake, 2 dosing rollers 4 scraper floor chains Pick-up feeler roller Carriage center Loadsensing / control line BG2 Loadsensing BG4 2-stage scraper floor motor Working lights / 3 x LED Side swing-out blade frame Access door to the loading area ISO / BUS operation Dkjdpfxetlq E So Akvor

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS Djdpfx Ajvncubskvjkr - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre – Installation height: 970 mm – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately – Hour meter: 306 hours (as of 26/6/2025) Dkodoy T Hfgepfx Akvjr – Last service: 26 June 2025 – Condition: in very good condition, well maintained

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Djdpfx Aow Emf Dekvskr Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick. Dkedpfx Aeulc Ixokvjr