Used filter press

Netzsch 1000 /110

Condition: used, Year of construction: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Power consumption: 142 A Kdjdsu R Icmopfx Ah Njg Power consumption max.: 70kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate drain: DN200 Solids discharge: Spiral conveyor Further information: see photos

Condition: good (used), functionality: fully functional, Opening: 620 x 350 mm Rotor-diameter x -width: 1.060 x 610 mm feed size hardrock -180 mm feed size limestone -300 mm, Kdjdpfjlgzrhex Ah Neg complete with E-drive, conveyor and steel-construction

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm working width, ideal for heavy-duty mulching tasks! The Brugger FMP 225 is a robust forestry mulcher designed for agricultural, forestry, and fallow land applications. Featuring a double belt drive, 36 tungsten-carbide-tipped hammers, and hydraulic equipment, it is ideally suited for tractors from 110 hp – reliable, powerful, and built for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 hp Weight: approx. 1,800 kg Mounting: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pieces, tungsten-carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for tailgate, 1x for pressure roller) Equipment: Hydraulic rear flap & pressure roller Included: PTO shaft Kdjdpjwhyw Eefx Ah Nog Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 ----- Contact us for a tailored quote!

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Koderunu Ijpfx Ah Njdg

Condition: ready for operation (used), Machine was overhauled and is fully functional, with documentation. Kjdofw Az Ujpfx Ah Nsdg

Year of construction: 2025, condition: new, Item: AV-11621-23-Vertical15m3 NEW - Never used! Vertical stainless steel tanks - 2 pcs. Exterios dimensions: Dia Ø 2435 mm Total H 4093 mm. Cylinder 396 mm. Vertical stainless steel tanks - 2 pcs. Kedpfxeibig Te Ah Nodg AISI 316

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Kdsdpfsu Av H Djx Ah Nsg

Condition: used, functionality: fully functional, tank capacity: 30,200 l, total height: 6,000 mm, inner diameter: 2,800 mm, overall weight: 1,400 kg, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 litres - Material: 316 L stainless steel - Interior finish: Cold rolled - Exterior finish: Cold rolled - Temperature controlled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped tray with drain - 1 total drain valve with cap APPENDICES Kdjdsv I A Nlepfx Ah Nog - Tanks compatible and suitable for storing liquid fertiliser - 6-month warranty - Compliant with CE standards

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm Kdedsp Audqspfx Ah Neg DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Kdodpfx Ahernnt Ij Neg Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.