Shredding plant

muetek MRZ 530 ECO - 15 kW

Year of construction: 2025, condition: new, We also offer leasing and financing options. Feel free to contact us! For all types of recycling, we have shredders and other recycling machinery in stock in Heilbronn. From copper recycling to plastic recycling, you can purchase all types of machines from us. Please don't hesitate to ask. ‼️IMMEDIATELY AVAILABLE‼️ IN STOCK‼️ Shredder for pre-shredding of cables, plastics, etc. – ALL-PURPOSE SHREDDER. ➡️Motor: 11 kW ➡️40 cm shafts ➡️380V 60 Hz 3-phase ➡️Dimensions (LxWxH): 1350x700x1600 mm ➡️Weight: approx. 800 kg Net: €13,999.00 +19% VAT: €2,659.81 Gross: €16,658.81 Errors excepted. Dcjdpfx Ajp E Eiyob Tjr Images may differ.

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Dsdpot Hagnefx Ab Tscr Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm 12-knife rotor 3 rows stator knives Inlet cross section approx. 780 x 1490 mm Dcsdpfx Absk N Iy Nj Tor Drive motor: 132 kW

Condition: good (used), different twin press drinker, a good condition, immediately available If you are interested, we will be glad to inform you about other machines in our house. Dodpoi Arz Ejfx Ab Tocr You are welcome to visit the machine in our house by appointment.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each Dcodpfxsd Spf Rs Ab Tor In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: excellent (used), CNC-swiss type automatic lathe brand: STAR type: SR-38B new in: 2017 equipped with: FANUC 31i - B control subspindle back working driven tools 2x c-axis Dcodpfoxl Etqjx Ab Tjr programmable b-axis y2-axis x3-axis switchable between guide bush and non-guide bush modes high pressure pump ol mist parts conveyor chip conveyor fire extinguishing system automatic barloader FMB LSK 38

Condition: used, Year of construction: 2024, operating hours: 95 h, maximum speed: 40 km/h, Operating hours: 95, First registration: 15.01.2025 Basic Equipment / Technical Data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to tool carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg - Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversible fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive - Pump: electronically controlled with variable displacement - Motor: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral hydraulic oil HVI 46 - Transmission: 2 gears, electrohydraulically controlled - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap belt - ROPS/FOPS-certified - Heating - Front, roof and rear windshield wipers - Sunblind Dcjdpfx Absuycgfj Tor - 4x1 joystick electronic with capacitive release incl. direction selector switch - CS = hydropneumatic cab suspension Telescopic Boom - 2-part telescopic boom with electronic end position damping (Soft Stop) Attachment - Quick coupling system type "ZM2", hydraulically controlled from the cab Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle fixed - Rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels, automatically acting parking brake when the engine is off Chassis - High-strength steel frame design Hydraulic System - Load Sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stabilisation Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition, and overload shutoff Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo-assisted brake - Hydraulic oil cooler - Rear mounting plate for trailer hitch (AHK) - Hydraulic reversible fan - Radio pre-installation - Work lights on cab (2 front, 2 rear) - Preparation for additional function at boom head - 2 hydraulic connections at boom head - Load protection grate on tool carrier - Lighting for road use - Automatic battery main switch - Electric connection cable in boom - Acoustic warning signal when reversing - Boom support cylinder for securing Optional Equipment - EU approval as tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights at base of first boom section - ASC

Condition: used, Year of construction: 1981, machine/vehicle number: 5171754, Palettenheber / Pile Hoists - Stack Lift Polar Mohr HL 600Year 1981 - Serial-No. 5171754 Format / Size max. 1100 x 800mm Hebekapazität / Loading capacity max. 600KG Hubhöhe / Lifting height max. 1000mm mit Lichtschranke zum automatische Anheben des Schneidgute with light barrier for automatically lifting the material paper Online-Video-Inspection by Skype-Video Dsdpfeh Ax T Tex Ab Tocr We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately Djdod Exwgepfx Ab Tscr

Year of construction: 1997, condition: ready for operation (used), overhead travelling cranes, 19 meter span, 2 units of 20 tons each and 3 units of 16 tons each, 10 meter lifting height Dsdpfew S D Uuox Ab Tscr