Used Wood Scanner for sale (6,942)

Condition: excellent (used), Year of construction: 2014, operating hours: 1,168 h, functionality: fully functional, machine/vehicle number: LR065411, power: 18.5 kW (25.15 HP), Technical data: - Motor voltage: 400 V (50Hz) - Suction connector: 160 mm, without discharge screw conveyor - Belt drive with two-stage plug-on gearbox and elastomer damper - Feed opening: 624 x 792 mm - Hydraulic power: 0.75 kW - Rotor speed: 98 rpm - Screen perforation: 15-20 mm - Cutting system: Rotor Hjdpfx Ahjzwcr Iegst - Version: smooth - Number of knife rows: 1 - Number of cutting tools: 17 - Version cutting tools: ÜSS - Rotor length: 630 mm - Rotor diameter: 248 mm

Condition: used, Year of construction: 1999, Used wood shredder Manufacturer: Weima Type: WL 4 Year of manufacture: 1999 Technical data V - Rotor Motor 18.5 kW 400 V, 49 A, 90 rpm Feed opening 800x600 mm Note: Hedpfezu Ap Usx Ahget The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, main engine 75 Kw, lower and upper gear drive 4 Kw each, entrance 420x420 mm, 2 blades 50 mm each Hsdpfx Ahjtpizpogjt

Condition: used, Debarker bezner 40-140. Working. Video by request. Hjdpfx Ahowkkbtogot

Condition: used, Year of construction: 2001, - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Panel dividing and solid wood saw Manufacturer: PANHANS Type: EURO 32 Year of manufacture: 2001 Dimensions: - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Machine attachments: - Roller table at the rear: 3982 mm Hjdpozuy Egofx Ahgot - Support beam at the rear: 9 pieces, 40 x 4056 mm - Air cushion table at the front: 2 pieces, 600 x 1800 mm, adjustable Air cushion table at the front for miter cutting device: 1 piece, 600 x 1400 mm - Air cushion miter table: 600 x 1800 mm, left - Miter ruler: up to 2060 mm - Clamps: 9 pieces, adjustable - Stop jaws: 2 pieces, adjustable - Side pressure: 65-1365 mm, stepless Special accessories: automatic miter cutting device - Special version: hydraulic lifting table with roller conveyor, infeed roller conveyor, 4 length edgers, 4 panel extractors Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1969, functionality: limited functionality, control type: manual, actuation type: electric, total height: 2,000 mm, total length: 1,300 mm, total width: 900 mm, overall weight: 450 kg, table length: 600 mm, table width: 600 mm, Bandsaw from Mössner - Type SM 420 Vertical bandsaw MÖSSNER SM 420 A, year of manufacture 1969. Description: - Factory number: 22600-77/14 - with stepless feed - bandsaw welding device IDEAL - machine light - table size approx.: 60cm x 60cm - table adjustable in inclination! - band dimensions: length: 316cm - 326cm max. - overhang approx.: 40cm Hodpfx Ajzc Hwtehget - space requirement: W x D x H - 1.30m x 0.9m x 2.0m - weight: approx. 560kg Used, with signs of wear! Inspection possible at any time. Machine is disconnected, standing on a pallet and secured with a tension strap. The machine can no longer be switched on, probably a minor problem. Private sale - without guarantee or warranty.

Condition: used, Year of construction: 2016, operating hours: 7,500 h, functionality: fully functional, overall weight: 19,000 kg, fuel type: diesel, axle configuration: 6x6, maximum load weight: 22,000 kg, empty load weight: 19,000 kg, tire size: 385 60 R 22, brakes: engine braking, gearing type: automatic, suspension: hydraulics, Jenz BA 725, 750 operating hours. Hedpfx Ahjzv Ugnegot

Condition: used, WOOD CHIPPER BRUKS 602 CM, 1 x 37 kW, 1 x 11 kW, 2 x 2.5 kW. Hsdpfx Aszv T Dfohgst

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and wood shredder: Hacker, MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical and powerful solution. The machines are manufactured and directly distributed from our factory in Germany. Advantages: - Continuous, even shredding process - High performance with low energy consumption Hodpezv S H Ejfx Ahgjt - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase current) - Controlled by Siemens PLC - Includes optional scraper bar - MHR630 ecoline Rößler shredder: "Made in Germany"

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Hjdpfx Ajympx Ujhgot

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Hsdpfxeyrhd To Ahgst Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: excellent (used), CATALOGUE NUMBER 8041 TECHNICAL DATA Hsdpjzkvhiofx Ahgst - shaft width 240mm - shaft diameter 260mm - inlet width 250mm - inlet height 120mm - number of knives 9 pcs - automatic reversing with adjustment capability - screen dimensions 30mm - toothed drive shaft (bottom) 0.75kW - toothed drive shaft (top) 0.75kW - with conveyor belt 2060x260mm - feeder motor with conveyor belt 0.55kW - main motor 15kW - feeder dimensions (length/width/height) 2270x700x600mm - machine dimensions (length/width/height) 1550x850x700mm - weight 800kg ADVANTAGES - German production - automatic reversing with adjustment capability - with conveyor belt - very good condition - used shredder Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8039 TECHNICAL DATA - inlet width 320mm - inlet height 160mm - roller width 320mm - blade length 310mm - number of blades 2 pcs - toothed drive roller, top - toothed drive roller, bottom - vibratory feeder with magnet 1650x310mm - automatic reversing - main motor 22kW - feed motor 2×1.1kW - machine dimensions with vibratory feeder (length/width/height) 2600x1500x1800mm - machine and vibratory feeder weight approximately 1500kg ADVANTAGES – Austrian made – vibratory feeder with magnet 1650mm Hedpszkvglefx Ahgot – automatic reversing – original DTR documentation – used shredder, very good condition Net price: 34900 PLN Net price: 8310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8040 TECHNICAL DATA - dimensions of the loading hopper (top, length/width): 850x1180mm - rotor width: 350mm - engine: 22kW - screen size: 12mm - number of knives: 6 pcs - dimensions (length/width/height): 1260x1200x1890mm - weight: 980kg ADVANTAGES – German-made – very good condition – used shredder Hjdezul Dhopfx Ahgot Net price: 25900 PLN Net price: 6167 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Hedpfozulu Tsx Ahget Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: used, Lathe Holzprofi M910, year 2012, Holzprofi M910, in less good condition, Hsdpfsx H Uiaex Ahget Price changes reserved, errors, typographical and layout mistakes excepted.

Condition: excellent (used), CATALOGUE NUMBER 8068 Technical specifications: - chipper inlet cross-section: 410mm x 180mm - shaft width: 430mm - shaft diameter: 430mm - number of knives: 2 pcs - screen dimensions: 50/50mm, 50/130mm - top feed roller, toothed - bottom: 2 feed rollers, toothed - length of the feed belt: 3750mm Hedpfx Ahszukyhogst - width of the feed belt: 380mm - auto-reverse (adjustable) - main motor: 22kW - feed motor: 2 x 1.5kW - machine dimensions (L/W/H): 5900x1500x870mm - weight: approximately 2000kg Advantages: - Polish-made - auto-reverse (adjustable) - with conveyor belt - DTR documentation - used chipper, very good condition Net price: 64,900 PLN Net price: 15,452 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8067 Technical data: - inlet width 400mm - inlet height 200mm - shaft width 540mm - shaft diameter 520mm - knife length 540mm - number of knives 2 pcs - screen dimensions 55x55mm - 2 geared drive shafts from below - motor for lower shafts 4kW - geared drive shaft from above - motor for upper shaft approximately 1.5kW - feeder belt length 3000mm - feeder belt width 400mm - main motor 45kW - automatic reversing (with adjustable setting) - dimensions L/W/H 5900x1800x1200mm - weight approximately 3500kg Advantages: - German-made - with belt feeder - automatic reversing (with adjustable setting) - used shredder, very good condition Net price: 68900 PLN Net price: 16405 EUR, depending on the exchange rate of 4.20 EUR Hjdpfx Aezuku Eohgst (Prices are subject to change due to higher fluctuations)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Hodpfetqlqajx Ahget

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. an exhaust air flap. The vacuum pump is used for rapid dehumidification. Hsdpfxetqlp Rs Ahgjt

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Hsdpfx Ahoza Ei Nsgjt Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7613 Hjdpjzadr Nofx Ahgot Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 8033 TECHNICAL DATA max. width of the workpiece – upper shaft 510mm max. width of the workpiece – lower shaft 450mm max. thickness of the workpiece, processed on both sides 200mm – from above: feed roller ratchets 1 metal, toothed feed shaft 2 metal, sequential feed shafts 1 metal, toothed feed shaft pressure roller planing shaft 510mm, 4 knives, with the possibility of installing profile knives approx. 7.5kW smooth, metal feed shaft upper pressure roller at the outlet with 2 feed rollers – from below: adjustable infeed table with guide planing shaft 300mm, 3 knives 3kW Hedeztziwspfx Ahget slip feed shaft, metal planing shaft 450mm, 4 knives 5.5kW 2 smooth, metal feed shafts – from the back: 2 side spindles 1) vertical, right 150mm 4kW 2) vertical, left 150mm 4kW spindle diameter 40mm spindles adjustable up/down, right/left spindles lockable axes arranged alternately electric height adjustment 2 types of feed speed + stepless 5-13, 13-36m/min dust extraction nozzle diameter 2x120mm, 150mm dimensions length/width/height 3200x1500x1600mm + control panel weight 1980kg – manufactured in Portugal – electric table lifting – ideal for processing wet and dry wood – 3 planing shafts + 2 spindles – very good condition – used planer Net price: 38900 PLN Net price: 9260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: like new (used), functionality: fully functional, machine/vehicle number: see pictures, overall weight: 260 kg, fuel type: gasoline, JCB wood chipper model CH150120PE with JCB-E460PE petrol engine (457 cc) and chipping capacity 120 mm. Specifications: Brand: JCB Model: CH150120PE Engine: JCB-E460PE, 4-stroke OHV, 1 cylinder Engine displacement: 457 cc Power: 15 hp Starting method: electric and pull start Hjdpfx Ahezvf Rwjgot Drive: belt Chipping capacity: 120 mm Feed hopper: 588 × 440 mm Feed opening: 278 × 167 mm Disc diameter: 600 mm Blades: 2 cutting blades + 6 chipping blades Disc speed: 1800 rpm Fuel tank capacity: 6.5 litres Documentation: Manuals: JCB-CH150120PE and JCB-E460PE (EN)

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm Hsdpfx Ahsztrfcsgot - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)