Used Vacuum Priming Machine for sale (69,363)

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 x-travel: 100 mm y-travel: 160 mm z-travel: 100 mm A-Axis travel: -40 ... +40 ° speeds of tool: 300 - 4000 U/min workpiece turning speeds: U/min connected load: 48 kVA Djds Ah Scvjpfx Aiiskw dimensions of the machine ca.: 5,3 x 4,2 x 3,4 m weight of the machine ca.: 6,5 t

Condition: used, Year of construction: 1970, Tool milling machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, including geometry report Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked. A test report according to DIN 8615 is available. During the work, the gibs were also adjusted, and the coolant pump was overhauled. Technical data Travel ranges X/Y/Z 300 / 150 / 340 mm Spindle stroke 60 mm vertical Tool holder MK 4 Dksdoz A Tn Iepfx Aiiow Speed range 40 to 2,000 1/min Two-stage motor, gear stages Speed steps 16 speeds Feed 16 steps 10 to 500 mm/min Drive power Two-stage motor approx. 1.0 / 1.4 kW Operating voltage 380 V / 50 Hz Total connected load approx. 1.9 kW Clamping surface 600 x 210 mm Max. table load approx. 150 kg Space requirement (W x H x D) approx. 1,100 x 1,000 x 1,500 mm Weight approx. 750 kg Equipment including: - Vertical milling head - Heidenhain 3-axis digital display - Automatic feed - Coolant system with overhauled pump - Equipment scope as shown in the picture Inquiry item: Transportation costs in an individual offer

Condition: like new (used), Year of construction: 2022, operating hours: 52 h, functionality: fully functional, Manufacturer: Vemag Model: Robby Year: 2022 Dsdpfx Aj Ah Sddsiiokw Condition: Used Serial number: 1390303 Stock number: 3332 Pump capacity: max 2300 kg/hr Hopper: 105 liters Vacuum pump: Busch 16 m³/h Power: 3 x 400V, 50Hz, 5kW Dimensions: 900 x 1200 x 1950 mm Weight: 425 kg Filling, portioning, and twisting Includes 859 twisting head and DHV937 casing holder Only 52 operating hours!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: cooling unit, documentation/manual, FANUC Robocut α-C400iB 31i WB HMI Complete with RENISHAW part probe Hammer for removing swarf Spatula for collecting swarf Robot interface for unattended machining Door with automatic (opening) descent • CNC Fanuc 31i-WB • Z-axis controlled by CNC • Wire driving unit with automatic threading AWF2 • 15” ‘touch screen’ display and portable keyboard • Automatic water level adjustment • Dielectric fluid filtration system • Fanuc cooling unit • Three-phase 380/220V 15 kVA transformer MANUALS TECHNICAL SPECIFICATIONS: Maximum workpiece size (mm)……………..……………730 x 630 x 250 Maximum workpiece weight (kg) ……………..………….500 Travel of X and Y axes (mm) ……………..……400x 300 Travel of Z axis (mm) ……………...…255 Travel of U and V axes (mm)…………….. ………..120 x 120 Maximum taper angle (°/mm)……………. 30°/80 Minimum incremental step of drives (mm)……………..……………..…0.0001 Wire diameter (mm)…………….……0.10/0.30 Maximum wire weight (kg)…………….……………..……………..……..16 Footprint (W/D) (mm)…………….……………..1930 x 2330 Machine weight (approx.) (kg)…………….…………….1800 Control…………….……………..FANUC 31i-WB Program memory size (MB)…………….……………...4 Generator AC ……………..standard Pulse generator ……………fully transistorized Maximum cutting speed …………….330 mm2/min (brass wire Ø 0.3 mm) Minimum surface roughness …………….Standard 0.3 Ra (OPTIONAL 0.1 RA for superfine finishing) Dielectric system ……………..……………Deionized water Tank capacity (liters)…………….……………..……………520 Filters ……………2 paper filters Machine weight …………….1800 kg FANUC Robocut α-CiB Series 31i WB Machine features Dksdpe Ah T Rwofx Aiiew High precision: New high-rigidity structure with thermal insulation. Symmetrical pyramid structure with a wide base to eliminate load overhang Lower guide support with thermally isolated arm Tank with hermetic pre-closure device (patented) Servo control of the water level in the working tank (follows the position of the Z-axis) Transparent sealing plate in two partitions for easy inspection and maintenance Economic efficiency: Long service life of wear parts Low operating costs Minimum footprint for installation Energy consumption monitoring User friendly: Numerical control of the latest generation FANUC 31i WB 15” ‘touch sensor’ LCD screen with Teach pendant USB I/O for data and programs System features to increase machining speed and precision New concept Skim Cutting Power Supply SF2 generator for finishing with Ra 0.3µm on tool steels with a thickness of up to 60 mm Patented AIP2 (artificial intelligence) discharge pulse control High-speed servo control (direct and not through the CNC) Machining of variable thickness shapes optimized thanks to AIP2 pulse control

Condition: used, Year of construction: 2003, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Maximum diameter: 650 mm Turning diameter: 320 mm Distance between centers: 890 mm Turret: 10 positions Spindle diameter: 400 mm CE marking: Yes Accessories: Tailstock, Chip conveyor Machine weight: 9000 kg X-axis travel: 30 - 275 mm Z-axis travel: 855 mm Spindle speed: 9 - 2500 rpm Bar capacity: 90 mm Motor power: 30/35 hp The Victor V TURN-36 is a CNC lathe manufactured in 2003, designed for precision turning operations. It features a maximum turning diameter of 320 mm and a distance between centers of 890 mm, making it suitable for medium-sized workpieces. The spindle bore measures 90 mm, allowing for the machining of bar stock. The machine is equipped with a robust spindle motor that delivers approximately 22.37 kW of power and can reach spindle speeds of up to 2500 rpm, enabling efficient and versatile machining processes. This lathe includes a 10-position tool turret that can hold multiple cutting tools, facilitating complex and multi-step operations without manual tool changes. The travel of the X and Z axes is 30 to 275 mm and 855 mm respectively, providing ample working space for various machining tasks. The CNC control system is a FANUC Oi-TB, renowned for its reliability and user-friendly interface. The control panel is mounted on the machine door and features a display with operating data, numerous buttons, knobs, a key switch, status indicators, and an emergency stop button for enhanced safety. The lathe has an enclosed work area with internal lighting to illuminate the machining zone, ensuring better visibility during operation. A chuck is mounted internally for secure workpiece clamping, and a tailstock or support is available to support longer workpieces during machining. Dkedpfx Ais Ah T Susijw Additional features include a chip conveyor system connected to the right side of the machine with a green chip container underneath, which helps manage metal chips and maintain cleanliness. Ventilation or extraction pipes are connected at the top for managing air or coolant. The machine weighs approximately 9000 kg and shows signs of use with some dirt and wear, but it appears to be structurally sound and well-maintained.

Condition: used, Year of construction: 1996, SCHIATTI FPS 20R – Year 1996 Straight-Line Edge Grinding Machine Dksdpj Ah T S Ujfx Aiijw 9 Wheels • Processing: Performs flat edge grinding and polishing with arris edges and a 45° front bevel (with a polished cerium oxide finish). • Glass thickness: 3 to 20 mm. • Maximum sheet weight: Up to 1000 kg. • Minimum sheet dimensions: 150 x 150 mm (reducible to 70 x 70 mm with the optional corner-cutting device). • Control: Managed via PLC display for programming and controlling polishing wheels, thickness, and feed speed. • Applications: Ideal for producing mirrors, shelves, bathroom fixtures, laminated glass, tables, and steps.

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 Dkjdpfsyk Dicjx Aiisw stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized backgauge, 2000 mm - Hydraulic upper jaw adjustment - Motorized lower jaw adjustment - Hydraulic tool clamping - Side guards - Foot switch - Operating instructions

Condition: used, Year of construction: 2002, travel distance X-axis: 7,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 4,000 rpm, Travelling column milling machine Manufacturer: ANAYAK Type: HVM 8000 Year of manufacture: 2002 Control: Heidenhain Technical details: X-travel: 7,300 mm Y-travel: 1,500 mm Z-travel: 2,000 mm Spindle speed: 4,000 rpm Tool taper: SK 50 Number of tool stations: 40 positions Condition: Used Available: from March 2027 Dsdpfx Aijz Ic Aloiekw The machine is under power and can be demonstrated. Technical features & accessories: - Control cabinet newly rewired - Orthogonal indexing milling head, 1° + 2.5° - Chip conveyor - Coolant system - Floor plates Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, functionality: fully functional, For sale: KOCH TECHNIK MIKO vacuum conveyor for transporting plastic granules. The device is designed for the automatic feeding of injection molding machines, extruders, and other processing machines. Data from the nameplate: * Manufacturer: Werner Koch Maschinentechnik GmbH * Model: MIKO * Serial number: GD1576 * Power supply: 230 V * Date of manufacture: 12-16 * Country of manufacture: Germany Equipment: Dsdpfx Aie Aibfzeiokw * Integrated suction unit. * Control panel with digital display and time adjustment. * Transparent tank for observing the material. * Side connection for connecting the transport hose. * Pneumatic solenoid valve. * Lid with snap-on fasteners. * Mounting base. * Power cord with plug. Condition: used, visible signs of wear as shown in the photos.

Condition: used, Year of construction: 1983, functionality: fully functional, For sale: a professional WIELAND IS-75 R industrial vacuum cleaner. The unit has been inspected, is in full working order, and ready for use. It features a robust metal construction on wheels, equipped with a handle for easy movement. Technical data from the nameplate: - Manufacturer: WIELAND, Germany - Model: IS-75 R - Year of manufacture: 1983 - Serial number: 996 - Power: 5.5 kW Djdpfj Aibbhjx Aiijkw - Power supply: 380 V, three-phase - Frequency: 50 Hz - Rated current: 11 A - Rotational speed: 2880 rpm - Protection rating: IP44 - Weight: 320 kg The set includes a suction hose and accessories visible in the photos: nozzles, brushes, and pipes. The unit has a side compartment for storing accessories. Used condition, with visible signs of use, scratches, and minor paint chipping. Technical condition: inspected and functional.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS TRAVEL X-axis: 400 mm Y-axis: 300 mm Z-axis: 300 mm WORK TABLE Table dimensions: 600 × 210 mm Number of T-slots: 4 T-slot width: 12 mm SPINDLE AND FEED Spindle speed: up to 2,000 rpm Feed range: 10–500 mm/min MACHINE DETAILS Manufacturer: Deckel Type: FP1 Machine type: Tool milling machine Dimensions (L × W × H): 1,000 × 800 × 1,500 mm Weight: 700 kg EQUIPMENT Workshop cabinet Matching accessories for the machine Dkedpe Adui Ajfx Aiisw

Condition: used, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm Dodpfx Aijx E Tmboijkw • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control Dksdpfx Aijx E Ttbjiew • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop • Light barrier system controlled by machine controller

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M+, spindle speed (max.): 7,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tool positions MACHINE DETAILS CNC control: Mazatrol M+ Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor: MAYFRAN Dsde Ah H Ihopfx Aiiekw 4th axis with rotary indexing table: Rotamatik RM 100

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Dkjdpfx Aijxrgtxoijw Good condition

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim Dksdezkh S Hepfx Aiijw

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase Dkedj Aibq Nepfx Aiijw • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: excellent (used), functionality: fully functional, For sale: Hidrostal D0DQ-S01 industrial submersible pump with a 4 kW three-phase motor, control box, float switch, and power cable. Robust construction with a ring-shaped base and a lateral discharge nozzle equipped with an elbow and quick-release coupling. Technical specifications: Motor power: 4 kW Power supply: 380–420 V, three-phase Frequency: 50 Hz Dsdps Aibq Tsfx Aiiokw Maximum flow rate: 48 l/s, or 172.8 m³/h Maximum head: 13.5 m Performance and head parameters are provided according to the attached specification for model D0DQ-S01. Maximum values do not occur simultaneously; actual flow rate depends on the discharge head and installation resistance. Included: pump with base, control box with buttons, float switch, power cable with power plug, discharge elbow with quick-release coupling. Condition: used, with visible signs of wear, paint scratches, and localized corrosion. The scope of equipment and visual condition are shown in the photos.

Condition: used, Year of construction: 2017, machine/vehicle number: GA26, Used ROBINO & GALANDRINO RECORD 10000 wirehooder machineTechnical Specifications & Performance DataThe Robino & Galandrino RECORD 10000 is a wirehooder designed for the application of wire cages on bottles used in sparkling wine and champagne-style beverage production. Built in 2017, this industrial packaging machine supports the final closure stage after cork insertion, securing the cork with a correctly applied wire cage.Manufacturer: Robino & GalandrinoModel: RECORD 10000Machine type: WirehooderYear of manufacture: 2017Electrical supply: 400 V, 3-phaseFrequency: 50 HzCurrent marking: 6 AElectrical diagram: REC377Advanced Automation & Control SystemsThis wirehooding machine is configured for industrial bottle handling and cage application. Its three-phase 400 V electrical supply is suited to integration within an automated bottling and industrial packaging environment. The machine can be incorporated into coordinated line controls and bottle conveying systems according to the requirements of the existing production line.Production Line Integration CapabilitiesThe RECORD 10000 wirehooder is intended for installation in sparkling wine bottling operations, typically downstream of corking and upstream of final inspection, labeling or secondary packaging. A machine of this type can operate as part of a used bottling line handling glass bottles, where accurate positioning and tightening of the wire cage are essential for reliable cork retention.Its role in beverage production is particularly relevant for sparkling wine and champagne-style products, where the wirehood provides mechanical security around the cork during storage, transport and distribution. Integration should be coordinated with upstream corking equipment and downstream bottle transfer conveyors.Machine Condition & Maintenance HistoryThis second hand Robino & Galandrino wirehooder was manufactured in 2017. Its data plate identifies the machine as RECORD 10000 and provides the electrical supply details required for preliminary technical evaluation. Inspection of mechanical assemblies, wire cage feeding components, bottle guides, electrical equipment and safety devices is recommended before commissioning in a bottling equipment installation.Operational Performance & VersatilityWirehooding machinery applies and secures metal wire cages around corked bottles, supporting consistent closure quality for pressure-sensitive sparkling beverage applications. The process helps maintain cork retention and packaging integrity through subsequent labeling, packing, palletizing and distribution stages.For industrial packaging and beverage production, correct synchronization with bottle conveyors and the preceding corking process is important. Format parts and bottle-handling adjustments should be assessed according to the glass bottle dimensions, cork type and wire cage specification used by the intended production line.Installation Requirements & Site PreparationInstallation requires a 400 V, three-phase, 50 Hz electrical connection. The site should provide... Dedpfx Aie Aia Eljiekw

Condition: used, Year of construction: 2017, machine/vehicle number: SO149, Used KOSME KSB 6R rotary blow molding machine 12000 BPH - Year 2017Technical Specifications & Performance DataThis automatic rotary PET bottle blow molding machine is manufactured by KOSME and identified as model KSB 6R. Built in 2017, it is designed for forming PET bottles from preforms in industrial packaging and beverage production environments. The machine has a stated production capacity of up to 12,000 bph and was operated with six-cavity molds for the PCO 1881 neck finish.Manufacturer: KOSMEModel: KSB 6RYear: 2017Production capacity: 12,000 bphContainer material: PETMaximum bottle volume: 3.0LMold configuration: 6 cavitiesPreform neck type: PCO 1881Machine configuration: Automatic rotary blow molding machineAdvanced Automation & Control SystemsThe KOSME KSB 6R is an automatic rotary blower equipped with a preform feeding system. This arrangement supports a continuous supply of preforms to the blow molding process and is suited to integration within an automated PET bottling equipment layout. The rotary configuration is intended to support consistent bottle forming at the stated output rate.Machine-specific electrical data, control hardware and automation component specifications are not included among the available technical details. Installation and commissioning should therefore be planned around verification of the existing electrical interfaces, machine controls and safety circuits.Production Line Integration CapabilitiesDesigned for PET bottle production, this second hand blow molding machine can serve as the bottle-forming stage of a used bottling line. It is suitable for installations where PET containers are produced directly from preforms before downstream rinsing, filling, capping, labeling and secondary packaging operations.The included preform feeding system supports upstream preform handling. A chiller is available with the equipment and can support process cooling requirements. The compressor is not included, so a compatible compressed-air system is required for operation. The machine is configured for bottles up to 3.0L with PCO 1881 neck finish preforms.Machine Condition & Maintenance HistoryThe equipment was removed from operation in January 2026, dismantled and placed in storage. Its current condition is therefore classified as stored equipment. Operating hours are not provided. Buyers planning recommissioning should assess the condition of mechanical assemblies, pneumatic circuits, heating components, electrical systems and safety devices before installation.Operational Performance & VersatilityThis KOSME PET blow molding machine is intended for producing PET bottles used in beverage production and industrial packaging operations. Its six-cavity mold arrangement supported output of up to 12,000 bottles per hour. The documented configuration used PCO 1881 preforms, providing a defined neck-finish platform for compatible bottle and closure programs.Molds are excluded from the offer. Bottle design, final format and product application therefore depend on the... Dkodpj Aia Ewjfx Aiiew

Condition: new, Year of construction: 2026, Laser source: Raycus 3 to 6 kW Laser head: 3D laser head for bevel cuts Structure: 2 horizontal chucks Loading: 6 m unloading 4 m Software: CAD CAM Tubest, Tube pro (Windows 10) Tube diameter: 15-160 mm Tube profiles: round, rectangular, square Options: Dedponkailsfx Aiiskw - Air compressor - Extraction system

Condition: like new (used), Year of construction: 2017, operating hours: 2,450 h, functionality: fully functional, Machine with 4+1 axis operation Djdpfj Ah T Nnsx Aiijkw CNC FANUC Like new condition, with only 5,000 operating hours and 2,450 spindle hours Spindle DIN 12,000 rpm with coolant system Chip conveyor 60-position tool changer High-pressure coolant through the spindle RENISHAW TS-27 tool presetter Roof with motorized top opening for crane loading Overhead table, 700mm diameter, with threaded holes for fixture positioning (removable)

Condition: good (used), Year of construction: 2006, CNC Horizontal Machining Center, Manufacturer: HÜLLER HILLE, Type: BLUESTAR 5, Year: 2006 Control system: SIEMENS Sinumerik 840D. Travel distances: 700 mm (Y), 680 mm (Z), 700 mm (X) Rapid traverse rate: X, Y, Z: 50 m/min Pallet size: 500 mm x 500 mm Spindle connection: HSK 63, magazine with 40 positions Spindle speeds: Up to 10,000 rpm Dkjdpfxj Aicw Ae Aiiow Chip conveyor, internal cooling system, machine documentation available. Machine in good condition. Further details can be found in the data sheets.

Condition: good (used), Year of construction: 2000, Vibratory finishing system, manufacturer RÖSLER, year of manufacture 2000. Includes: Feeding unit 2 vibratory finishing drums Discharge conveyor Control system Filtration system Centrifuge Sound-insulated enclosure Dksdpfx Ao Aic A Deiiow Dust extraction and filtration system In good condition.

Condition: good (used), Year of construction: 2008, CNC Vertical Machining Center Manufacturer: MIKRON AGIE CHARMILLES, Type: VCE 800 Plus, Year of Manufacture: 2008 Control System: Heidenhain ITNC 530 Travel distances: X 860 mm, Y 560 mm, Z 600 mm Table size: 1000 mm x 500 mm Spindle: SK40 Magazine capacity: 24 tools Chip conveyor and machine documentation available. Djdpfxj Aicz Uj Aiiskw In good condition.