Used Track-Mounted Mobile for sale (16,042)

Year of construction: 2025, condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. Ihodpfxjyaapws Ah Njt For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight: Ihedpfx Ahox Edmpo Net

Condition: used, Year of construction: 2017, operating hours: 921 h, 2017 | Genie TZ-50 DC w/ Drive 17.09 m | Used Trailer-Mounted Boom Lift | 921 hours 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 17900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 23 inspection points 23 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Considering the age of the machin everything works as it should 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38151 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Ihedpfx Aex U E Najh Nst ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2003, operating hours: 2,777 h, 2003 | Takeuchi TL130 with forks and loader bucket | Used Tracked Skid Steer | 2777 hours Iedpfjx U E Ntsx Ah Noht 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 46 inspection points 39 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine oil sytem need to be checked, regular maintenance and beauty work needed 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39764 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Mobile extraction system Suction pipe 100 mm Ø Filter cleaned H2 dust-tested Ihsdpfx Ahex U Dbho Not 720 m³/h 1.1 kW

Condition: excellent (used), Catalogue number: 7547 TECHNICAL DATA Track width: 300 mm Roll working width: 290 mm Max. disc diameter: 300 mm Disc bore diameter: 70 mm Max. cutting height: 100 mm Table width with extension: 680 mm Table length: 1630 mm Iodpfjx Uz T Usx Ah Noht *From above: 2 rows of pawls Metal pressure slip roller Roller with saws 2 smooth metal pressure slip rollers From below: Guide rail Pawls Track Electric height adjustment of main body (up/down) Central track lubrication 2 feed speed modes Feed motor: 1.1 kW Main motor: 22 kW Extraction nozzle diameter: 130 mm Overall dimensions (L/W/H): 2000x1400x1700 mm Weight approx.: 900 kg – Italian manufacture – Very good condition – Used multi-blade saw Net price: 34,900 PLN Net price: 8,300 EUR (based on 4.2 EUR rate) (Prices may vary according to rate fluctuations)

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation Ijdpfxex Uz Tuj Ah Nsht – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Multiple-shaft circular saw (gang saw) by FOD BYDGOSZCZ* DPPA III 50E 620/120 Catalogue Number: 7407 TECHNICAL SPECIFICATIONS: - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of the shaft with saw blades: 620 mm - Maximum saw blade diameter: 450 mm - Saw blade bore diameter: 90 mm Upper side: - Kickback pawls - 2 toothed driven rollers Lower side: - Kickback pawls - 2 smooth driven rollers - Saw blade shaft - Smooth driven roller - 2 feed speed options - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2370x1400x1800 mm - Weight: approx. 3000 kg – Polish production – Used machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (based on an exchange rate of 4.2 EUR) Isdpfx Aox Uz S Dsh Nsht (Prices may change depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer for the manufacturer. All trademarks and names are used purely for informational purposes to identify the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business association with the manufacturer.

Condition: good (used), mileage: 17,411 km, color: white, lifting height: 50,000 mm, Year of construction: 2011, operating hours: 36,670 h, Drivetrain Make of engine: Isuzu Weights Empty weight: 132.000 kg Functional Mast: lattice Mast length: 5.100 cm Length of jib: 11 m Lifting capacity: 135.000 kg Ijdpfx Ahex Tnvts Neht Condition Technical condition: good Visual appearance: good Identification VIN: T2152 Serial number: SC150-7097 Other information Hook height luffed jib: 460 cm Emission level: Stage II / Tier II Delivery terms: EXW Counterweight: 55 Transport dimensions (LxWxH): 9,445x6,365x40233,614 Production country: JP Additional information Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, empty load weight: 2,150 kg, lifting power: 980 kg/m, lifting height: 2,500 mm, tire size: 31X15,5-15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 980 kg, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With its high lifting capacity, the HR 2210 loader can lift even heavy loads of up to 980 kg to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the HR 2210-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-B35 Wheel Loader • Fully equipped • Wide track for greater stability • Extensively optimized in Germany • Includes manually adjustable pallet forks • Includes standard 150 cm bucket • Comfort cab with heating, ventilation, and radio • Rearview camera with display • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for trailer use • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 € Gross: €27,304.55 Iedpfx Ahjrhh Sqj Noht Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria for an additional charge Technical specifications Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lift height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm (standard bucket tipped) Lift time / lowering time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories are available from us. Please provide your telephone number when making inquiries!

Condition: used, Year of construction: 2006, operating hours: 6,912 h, 2006 | Caterpillar 973 C | Used Tracked Loader | 6912 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 61600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 36 inspection points 27 approved ✅ 8 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the machine, presence of oxidation on various body elements. The exhaust is perforated on the lower part. The right side battery attachment is missing. Not all lights are working. The air conditioning does not work. Presence of light white smoke at the exhaust level. Significant presence of oxidation around the cabin and doors. The hydraulic oil level is low. Ihodpfox Ut Ukjx Ah Net 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39465 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), functionality: fully functional, Paint mist extraction system/suspension rail - incl. suspension rail, dimensions: approx. 10000 x 7000 mm - incl. various hanging brackets, paint trolleys, and a paint mist extraction unit Ihodpfox T Amyex Ah Net - extraction unit dimensions: 3000 x 1000 mm Note: The item must be picked up bindingly between 18 and 26 February 2026 on a date to be agreed. FCA D-78087 Mönchweiler – loaded onto truck

Condition: used, functionality: fully functional, power: 77 kW (104.69 HP), fuel type: diesel, empty load weight: 10,800 kg, Year of construction: 2014, operating hours: 7,688 h, drive type: Diesel, Wheeled Excavator Ihjdpsx Tx Rzefx Ah Njt Technical condition: good Front tyres condition: 20 - 40% Rear tyres condition: 20 - 40% Description: Takeuchi TB 295W Wheeled Excavator – Year 2014 – 7,688 operating hours – 10.8 t operating weight – hydraulic quick coupler – POWERTILT – 1 pcs nearly-new 100 cm ditch bucket – 1 pcs used 40 cm ditch bucket – 1 pcs 150 cm grading bucket – 4-cylinder ISUZU turbo diesel engine 104 HP – air conditioning – long dipper stick – tyres approx. 30% – good original condition – Quick coupler, buckets, 3rd valve, 4th valve, heater, full cab, air conditioning,

Condition: used, Year of construction: 2019, operating hours: 4,240 h, 2019 | Isoli PNT220NLX on Nissan NT400 | Used Truck-Mounted Boom Lift | 4240 hours | 53375 kms 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 57 approved ✅ 3 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Car defects: 1. Chassis and body rusted. 2. Headlight does not light, rear turn signal does not light. 2. Engine check engine light was on, but fixed, likely ADD blue system failure. (error extinguished for now) 3. Hydraulic tank bent. 4. Hydraulic control devices without marking. 5. Seat torn. 6. Interior dirty. 7. Body parts on the driver's side are of different colors. 8. Safety triangle and first aid kit missing. 9. Entry point heavily scuffed and rusted. 10. Mandatory technical lifting equipment and vehicle inspections are valid. 11. There is a technical maintenance and operation manual. 12. No obvious major faults are visible, except for those listed. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39451 Equippo" is commonly used when looking up more details online. Ihsdpfox Twahsx Ah Not 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2016, operating hours: 4,116 h, 2016 | Isoli PT200 on Nissan NT400 | Used Truck-Mounted Boom Lift | 4116 hours | 55182 kms 📍Location: Lithuania 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 58 inspection points 57 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Two of the probes (shown on photo) had to be replaced 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39378 Equippo" is commonly used when looking up more details online. Ijdpjx Twabsfx Ah Njht 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), functionality: fully functional, mileage: 442,300 km, first registration: 02/2017, fuel type: diesel, driver cabin: day cab, loading space length: 5,000 mm, Year of construction: 2017, Equipment: ABS, EBS, air conditioning, airbag, compressor, crane, electric window regulation, fog lights, onboard computer, power assisted steering, power mirror, retarder, tachograph, Single-owner vehicle, always serviced exclusively by an official DAF workshop, with certified invoices and complete documentation. Equipped with EFFER 130C/3S crane featuring radio remote control. Fixed 5-meter flatbed. SERVICING PERFORMED REGULARLY, CERTIFIED AND GUARANTEED MILEAGE. Financing options available up to 60 installments, with the most competitive rates on the market. Please note: The description may contain features that differ from the actual specifications, which must be verified on site. This spec sheet does not constitute a contractual commitment. Ihsdsyarv Aopfx Ah Nst For further information or clarification, contact 380 741 2811 (direct or WhatsApp). Paolo Antonio Gorgoni The photo gallery is made on location at our premises; the images are real and accurately represent the current condition of the vehicle. Please note that the system automatically enters features and accessories; therefore, occasional discrepancies may occur. To ensure maximum accuracy, we always recommend verifying the details directly with us.

Year of construction: 2005, condition: good (used), functionality: fully functional, crusher HARTL PC204N opening: 1.260 x 1.060 mm rotor-diameter: 1.300 mm new blow bars feed hopper approx. 7 cbm Ijdpsnxi Dnefx Ah Noht vibrating chute active 2-deck pre-screen side- and main-discharge conveyor overband magnet separator CAT diesel engine C10 (291 kW) weight: approx. 50 t.

Condition: used, Year of construction: 2015, operating hours: 4,186 h, 2015 | Hitachi ZX48U-5A CLR with 3 excavator buckets | Used Tracked Excavator | 4186 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 33900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 61 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: well-maintained machine, boom newly re-pinned 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40014 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Iedpfx Ajx Trmpoh Nsht ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, machine/vehicle number: 1602-2-2, mileage: 5 km, power: 96 kW (130.52 HP), fuel type: diesel, empty load weight: 2,750 kg, maximum load weight: 750 kg, overall weight: 3,500 kg, wheelbase: 3,445 mm, fuel: diesel, CO₂ emissions: 196 g/km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Citroen Jumper Euro6 3500Kg new vehicle EU new car Mileage 5 km Fuel Diesel kW/hp 96/131 Manual gearbox 6 gear ccm 1.997 cm³ Particle filter, air conditioning, daytime running lights, reversing camera, ESP, ABS, on-board computer, heated mirrors, electric front windows, central locking with remote control, emission class (NFZ): Euro 6, COC papers. Sales body made of GRP Superlight in sandwich construction with alcove, unused and with a large sales hatch across the entire width of the vehicle on the right, 2/3 seater, driving license class B, rear running board, LED lights, reversing camera, non-slip industrial floor R11. Various low-frame chassis available (Fiat, Citroen, Opel). Ihodpfof D Eg Tjx Ah Not Box body interior dimensions WDH 3500 x 2250 x 2300 mm Side flap 3270 x 1480 mm Permissible total mass 3,500 kg Unladen weight 2,750 kg Paint finish on request Interior fittings Left-hand side: 1 work surface with stainless steel worktop, sliding doors and intermediate shelf, approx. 3500 x 600 x 850 mm 1 double washbasin approx. 600 x 600 x 850 mm WxDxH incl. fresh and waste water tank, boiler and pressure system, soap and paper dispenser. 12V automatic battery charger for the starter battery. 4 wall shelves in white with aluminum edge profile, 2x left 1250 mm and 2x right 1250 mm. Right-hand side: 1 refrigerated counter in 800 mm depth with compressor, storage compartment with extra doors at the bottom, foam insulated housing, display surface in stainless steel, aluminum work surface and front glass, temperature from +1°C to 7°C, approx. 3500 x 800 x 1100 mm WxDxH. Further equipment: Shelf above the sales flap, folding bag shelf at the sales opening. 2 LED panels on the ceiling, 3 dimmable LED spotlights above the sales counter and LED counter lighting. Standard electrical installation 380 volt/16A switchable to 230 volt/16A, 2x feed socket according to CEE standard, RCD circuit breaker, 16 ampere fuse with acceptance, 5 double sockets, hygiene package. Subject to errors and prior sale!

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm Ihjdpjxvb Hzsfx Ah Not - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: excellent (used), track width: 360mm shaft width: 350mm max disc diameter: 350mm disc bore diameter: 80mm max cutting height: 120mm electric lifting of the saw shaft Ihedpfx Asu Evqnoh Not electric lifting of the body smooth regulation of feed speed feed motor: 2,5kW main motor: 45kW

Condition: used, mileage: 153 km, power: 132 kW (179.47 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, Year of manufacture: 2021 Front axle: Steering Rear axle: Double wheels Ihedpfeyanfgex Ah Net VAT/margin: VAT qualifying 10 x in Stock

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: - Max. air flow rate: 3,200 m³/h Isdswp Rgmjpfx Ah Nsht - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: used, mileage: 206,853 km, power: 310 kW (421.48 HP), first registration: 05/2018, fuel type: diesel, empty load weight: 15,050 kg, maximum load weight: 10,950 kg, overall weight: 26,000 kg, tire size: 385/65 22,5, tire condition: 60 %, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 04/2026, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,800 mm, loading space volume: 16 m³, loading space length: 6,800 mm, loading space width: 2,490 mm, loading space height: 950 mm, Year of construction: 2018, operating hours: 206,853 h, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, Equipment: ABS, air conditioning, cabin, crane, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, spoiler, trailer coupling, truck registration, Reference number for inquiries: 40730 Mercedes-Benz Arocs * Year of manufacture: 2018 * ABS, Anti-lock Braking System * Trailer coupling * EBS, Electronic Braking System * Electric window lifters * Cab * Air conditioning * Crane * Air suspension * Lift axle * Power steering * Seat heating * Auxiliary heater * Cruise control * On-board computer * Differential lock * Local distribution transport > 7.5 t * Lashing holes in outer frame (Multilock outer frame) * Rear-steered axle * Stone grab * Digital tachograph * USB interface * OBU (on-board unit) pre-installation * AdBlue tank * Roof spoiler * Fog lights * Comfort air-suspension seat * Multifunction steering wheel * Sun visor * Collision warning system * Rotary servo and stone grab control * Inspection: General/Emissions (HU/AU) 04.2026 * Transmission type: Automatic * Suspension: Leaf/Air * Gross vehicle weight: 26,000 kg * Unladen weight: 15,050 kg * Payload: 10,950 kg * Permissible GVW: 26,000 kg * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 60%|60% -- 60%|60% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Wheelbase: 4800 mm * Tire sizes: 385/65 R22.5 * Internal dimensions: L=6,800 mm, W=2,490 mm, H=950 mm * Internal volume*: 16 m² * Pallet spaces: 17 * Front axle 385/65R22.5 * Crane: Palfinger PK 23001L * Year of manufacture: 2018 * Kinshofer stone grab Disclaimer: Modifications, prior sale, and errors excepted. Further images and videos can be found on our homepage. Our comprehensive services include for example: * Purchase / Sale / Rental of commercial vehicles * Fast and uncomplicated financing * Handling of all (export) documents * Ordering of export/customs plates Isdpfxsyamwbe Ah Neht * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV approvals, registration service * Transfer of commercial vehicles Contact our trained staff – we will be happy to advise you.

Condition: used, Year of construction: 2014, operating hours: 11,000 h, Equipment: all wheel drive, Liebherr 918 year of manufacture: 2014 11,000 operating hours Liku Fix 1 bucket / hydraulic universal grab ZSA GERMAN MACHINE from first owner Phone: We are happy to assist with your financing or leasing EU sales: net price upon presentation of company documents and VAT number VAT deposit €2,000 We speak English We speak Serbo-Croatian Ihsdpex Hrdhjfx Ah Njt Our service for you: - Transit plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau station Phone: