Used Textile for sale (659)

Condition: used, Year of construction: 2014, • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° Kfsdpfxsx Huhce Affea • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 27 reviews ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Free shipping: 10-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ PLUS VAT & SHIPPING* ►►Buy now◄◄ ✨Sandblasting kit with tank✨ ⭕ Outdoor sandblasting, indoor sandblasting, used in mobile sandblasting machines with compressed air. ⭕ Pressure Sandblasting Pot Pressure Sandblasting Pot - Technical Specifications ✔ Working pressure: 7 bar ✔ Abrasive type: steel grit, steel ball, garnet, glass ball (glass sand), etc. ✔ Air consumption: liters/min is shown in the table below. ❓What is a pressure sandblasting pot❓ ✨ A pressurized sandblasting machine is a type of sandblasting equipment that can be used as a mobile unit anywhere outdoors to sandblast non-transportable surfaces (buildings, large steel structures, etc.). It can also be used in sandblasting rooms to sandblast large parts. Since it operates with air pressure, it also requires a compressor. ✨ At Proton, we have standard sandblasting pots of 50 l, 100 l, and 200 l. We can also supply various sizes of blast pots depending on your needs. ✨ All spare parts and equipment are available in our company. We offer sandblasting masks, sandblasting gloves, sandblasting hoses, and boron carbide sandblasting nozzles, which are necessary to ensure that the sandblaster is not affected by the environment. ⚡️Areas of Use of the Sandblasting Pot⚡️ To achieve the required surface roughening before painting and coating, this system is used in areas where cleaning and decorative shaping are desired. The main applications are; the shipbuilding industry, foundry industry, automotive, marble, textile, glass, pipe, manufacturing, and assembly industries. ✳️Standard blast pot sets are supplied with the following equipment.✳️ SANDBLAST POWDER 200 L ►1 Sandblasting Control Valve ►1 Remote Control Valve ►1 Quick-Release Silencer ►1 Water Separator Regulator ►1 Remote Control Handle ►1 Sandblasting Flow Diverter "Y" Connector ►1 Set of Barbed Fittings ►20 Meter Sandblasting Hose ►40 Meter Pneumatic Twin Hose ►1 8 mm Venturi Nozzle ►1 39 mm Nozzle Holder (MHE-1) ►1 Sandblasting Mask ►1 Overall ►1 Pair of Gloves ►1 Sandblasting Bag Kodpfsfvqixsx Affofa ►1 2-outlet air stand ►20 m breathing air hose and connection sockets ❗❗❗ Compressor features required for sandblasting tanks Motor power: 37 kW - 50 HP, air flow: 6.25 m3/min, 7-8 bar pressure; a compressor with the required specifications is required. A screw compressor is recommended. ❗❗❗

Condition: good (used), For sale: robust German industrial washing machine from the renowned brand Miele, model WS 5141 EL. This unit is designed for intensive use in commercial laundries, hotels, hospitals, or production facilities. It is equipped with an automatic detergent dosing system and a high-performance heating unit with a power output of 15 kW. - Technical specifications: • Model: Miele WS 5141 EL • Type: Industrial washing machine, freestanding • Power supply: 3N~ 380–415V / 50–60Hz • Heating power: 15 kW • Power consumption: 15.4 kW • Load capacity: up to 14 kg • Spin speed: up to 1000 rpm • Drum: Ø 590 mm x 512 mm • Weight: approx. 380 kg • Electronic controls with programmer and automatic dosing • Protection class: IP X4 • PC / programming interface - Technical condition: • Fully operational unit • Ready for connection – complete • Dosing system requires a refill for container no. 2 (message displayed on the screen) • Inspection valid until 2025 (Miele service sticker) • Recently decommissioned from an industrial line - Applications: Ideal for: • Commercial laundries • Industrial facilities • Care homes / hospitals • Hotels and guesthouses • Cleaning companies - Why is it worth it? Premium-class German-made machine – extremely durable construction, perfect for intensive operation. Instead of investing in a new one for PLN 20,000–25,000 net, save a substantial amount while maintaining Miele’s renowned quality and reliability. - Included: • Miele WS 5141 EL washing machine • Cabinet with dosing installation (as shown in the photos) Kodpfx Aew Hhvmjffjfa • All connection hoses and cables

Condition: ready for operation (used), functionality: fully functional, ✂️ Foam Flake Cutting Machine – Model BC206 Ideal for manufacturers of sofas, armchairs, mattresses and cushions, the BC206 foam flake cutting machine is designed to transform foam blocks into flakes of various sizes (from 3 to 50 mm). These flakes can be used as padding to ensure optimal comfort and increased durability of the finished products. ✅ Technical characteristics: Dimensions: 3000 x 1200 x 1100 mm Weight: 1000 kg (robust and stable structure) Production capacity: 350 to 400 kg / h Adjustable cutting size: 3 to 50 mm according to needs Motor power: 28.9 kW (high performance and energy saving) 📦 Applications: Manufacture of cushions, poufs and pillows Upholstery of sofas, mattresses and car seats Production of flakes for foam recycling projects 🛠️ Advantages: Fast and efficient production: The high cutting capacity allows continuous production, ideal for high-demand industries. Easy adjustment of the size of the flakes: The user can adjust the size of the flakes to meet different market requirements. Solid structure: The machine is built to last, with industrial quality materials. Energy saving: The high-performance motor consumes less energy while offering maximum productivity. 🌱 Ecological Solution: Kfsdpevn T Hnsfx Affoa This machine also allows you to recycle foam scraps and recover them in the form of reusable flakes, thus contributing to the reduction of industrial waste.

Condition: refurbished (used), Durkopp adler 867-190122M 1 needle flat bed sewing machine with triple transport,thread trimmer, foot lifter, complete on table . Ksdpfxspbv Aye Affofa

Condition: used, Year of construction: 2017, color: red, overall weight: 16,000 kg, maximum load weight: 12,500 kg, empty load weight: 3,500 kg, loading space volume: 51 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 2,680 mm, first registration: 11/2017, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40405 Krone, Swap Body / Container * Year of manufacture: 2017 * 7.82 m * Fixed roof * Load securing certificate DIN EN 12642 Code XL Kfsdex E Ntdjpfx Affja * Recessed lashing rings * Portal door * Textile construction * Full double-deck incl. cross beams * Suitable for rail transport – crane compatible * Miscellaneous, other * Gross weight: 16,000 kg * Unladen weight: 3,500 kg * Payload: 12,500 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7,700 mm, W=2,480 mm, H=2,680 mm * Internal volume*: 51 m³ * Corner fitting dimension E=5,853 mm * Overhang dimension: 983 mm * Pallet spaces: 19 * Krone swap body 7.82 m * Customs seal Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, e.g.: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documentation * Procurement of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Vehicle transfers Ask our trained specialists – we are happy to advise you.

Condition: used, Year of construction: 2007, functionality: fully functional, Lectra FX CNC cutting machine width: 170 cm Ksdpjwzxz Njfx Affsfa length: 185 cm discharge conveyor: 200 cm CNC control

Condition: excellent (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, machine/vehicle number: TK3S25211612122, The machine is new, but it is code-locked by the manufacturer. The software does not function. 2500 x 2100 mm. Ksdpfox Exk Sjx Affofa

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers • Final purification and classification of rubber granulate This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. Kedpex Aidbsfx Affsfa System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder o steel o textile fibers • Optional low-noise and low-dust engineering packages available The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process.

Condition: like new (used), Year of construction: 2018, operating hours: 600 h, functionality: fully functional, laser power: 200 W, type of cooling: water, From company closure: Trotec SP2000 (original price: €144,582.00) from 2018, large-format CO₂ laser cutting system for precise processing of acrylic glass, wood, cardboard, textiles, and various other materials. This machine is designed for high production demands and provides reliable cutting quality across the entire working area. Annual servicing was performed by Trotec. With only around 600 operating hours, the machine is in excellent, like-new condition. Includes chiller, exhaust system, and control unit. Operating manual and technical data sheet included. Technical features (general): • Large-format laser system with generous work area • Powerful CO₂ laser unit (model-specific wattage) • Precise and clean cutting edges, especially with acrylic • High repeatability and stable mechanics • Efficient material usage thanks to optimized software • Pass-through option for sheet materials and large-format parts • Includes cooling system and as-new accessories Condition: Well-maintained, ready for immediate use Kedpfx Aox Emz Ssffjfa Collection & Access: Collection by individual appointment possible. Access via large gate – ideal for vans. Loading assistance can be provided if required. Important: Invoice will be issued. Prices listed are net. Contact: We respond as quickly as possible. Phone available daily after 5 p.m., Saturdays all day. Please feel free to contact us with any questions or concerns.

Condition: good (used), Dürkopp Adler 867-290342-100cm - 2 needles Kfjdox Exygspfx Affea - Fully automatic

Condition: used, Year of construction: 2020, operating hours: 4,930 h, functionality: fully functional, machine/vehicle number: 510-3888, rotor diameter: 370 mm, number of blades: 82, power: 75 kW (101.97 HP), WEIMA WLK 1500 / 75 kW V-Rotor Industrial Shredder Suitable for Paper, Wood, Plastic, Metal (Swarf), Textiles and General Waste Processing Summary Heavy-duty WEIMA WLK 1500 industrial shredder with a 75 kW V-Rotor, suitable for continuous processing across multiple waste streams including paper and cardboard, wood and biomass, plastics, metal swarf, textiles, and general waste reduction. The machine is supplied complete with its associated extraction unit. Key Specifications • Manufacturer: WEIMA • Model: WLK 1500 • Rotor Type: V-Rotor • Installed Power: 75 kW • Cutting Chamber: 1500 mm working width • Material Suitability: Paper, cardboard, wood, plastics, metal swarf, textiles, mixed waste • Feed: Conveyor-compatible • Running Hours: 4,930 hours • Condition: Operational and available for inspection Included with the Machine • New, unused replacement blade set • Dedicated extraction unit (multi-port extraction with collection bags, as shown in photos) Inspection and Condition This machine was originally purchased from Fercell. A recent inspection by Fercell identified several maintenance and condition items, which have been fully considered within the selling price. Inspection Findings • Hydraulic hose leaking • Screen door switch damaged • Screen door handle missing • Screen doors modified for reverse Ram operation (recommended to return to factory specification) • Control panel isolator switch damaged (replacement recommended – panel currently remains live/on) • Hopper dog box damaged (replace if required) • Rear hydraulic door – two damaged threads requiring repair • Hydraulic oil low due to hydraulic hose leakage (full service and oil top-up recommended) Full inspection notes can be provided to interested buyers. Applications • Paper and cardboard recycling • Wood recycling and biomass preparation • Plastic recycling and re-processing • Metal swarf reduction • Textile destruction and processing • General waste management and volume reduction Condition and Viewing • Operational condition • Available immediately • Available for inspection by prior arrangement Decommissioning and Removal Buyer to arrange full decommissioning, disconnection, dismantling, lifting and removal of the equipment. Seller will provide reasonable site access for inspection and collection. Additional Items Available (separate cost) Outfeed Incline Conveyor (1.75 kW) – Heavy-Line PVC Belt “L-Type” Conveyor Industrial conveyor transferring shredded material from the shredder to the extraction system. Key Features: • Durable PVC belt • L-shaped elevation design • Steel frame • Adjustable discharge height Price: £9,000 Screen Insert – WEIMA WLK 1500 (30 mm, t = 10 mm) Spare classification screen for controlling shred size from the WLK1500 shredder. Key Features: • 30 mm hole pattern • 10 mm heavy-gauge steel • Improves consistency of final product • Quick installation Price: £1,000 Pricing • WEIMA WLK 1500 Shredder with extraction unit: £55,000 (€62,960) • Outfeed Incline Conveyor (optional): £9,000 (€10,300) Kjdsx Eklnspfx Affefa • Screen Insert (optional): £1,000 (€1,445) Reason for Sale Business closure. Location Haverhill, CB9 8QP, United Kingdom

Condition: used, mileage: 478,000 km, power: 355 kW (482.67 HP), first registration: 02/2023, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XG 480 SAPPHIRE BLUE (CG258) Wheelbase 4.00 m / Rear overhang 0.99 m Rear: Air suspension SR1344 Pneumatic control for parking brake XG cab JOST JSK42, cast iron, 150 + 12 mm Armrests on both sides of the driver’s seat Rear axle load capacity 13.00 t 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 LED skylights Dashboard design: flat Front suspension: standard leaf spring Interior trim color: Exclusive Additional cab insulation Parking heater with heat pump and timer Cab interior trim: Hexagon Front: 8.00 t, parabolic, 163N LED interior lighting Dashboard table Automated gearbox with manual override – full version Digital tachograph, VDO 1C, version G2V1 Fifth wheel pin diameter 2 inches Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Emission class Euro 6 ASR traction control Driven rear axle with disc brakes Catwalk with step, standard Catwalk step, left Work lights, LED Automated gearbox, TraXon, 12 gears ECO performance Heated fuel pre-filter DAF Connect Rear axle ratio 2.38 Fuel tanks left and right Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Type approval for complete vehicles (WVTA) Rear axle 1, 13,000 kg, load index 149 Safety net on both bunks Door trim: loosely woven fabric Cab wall trim textile Electronic Stability Control (ESC) Lane departure warning system Electric windows Pollen filter LED daytime running lights Driver Performance Assistant CO2 display: Y R1, 315/70R22.5 F1, 385/55R22.5 Adjustable roof spoiler for XG cab Central locking Alternator 110 A, batteries 2 x 210 Ah AGM LED headlights and fog lights Electrical trailer connection 24V/15-pin cable: 15-pin + EBS ks: 765 step left + 430 right, H 620 mm Antenna: DAB prep. radio, 2x mobile phone, GNSS extra: CB Upper bunk Analog control gearbox PTO, no 1st gearbox PTO Side skirts with extensions at underside Cab air suspension Headlamp washer Reversing warning system MX-13 engine, 355kW/483HP cab badge: 480 DAF Corner View DAF Infotainment Luxury Plus, Luxury speakers Two LED headlights for cab rear wall Turning assistant ZF intarder Passenger seat, swivel base Steering wheel, leather Mechanical differential lock Auxiliary power supply: standard + 2x 40 A Xtra Comfort mattress for lower bunk Front axle(s): 385/55R22.5 Headlight trim color: cab color Bumper color: cab color Rear lights with LEDs External sun visor Preparation for air tool Parking brake assistant Refrigerator and drawer Cab color roof spoiler Side fender color: cab color SAPPHIRE BLUE (CG258) Curtains with separating curtain Storage compartment with drawer in center console Kodpjxpzq Hsfx Affefa Automatic cab climate control Lower cab step in cab color ECAS remote control with extended functions Driver’s seat: Super Air Passenger seat: Comfort Air Battery energy monitoring Aluminum air tanks Signal horns, 2 sets Side skirt color: cab color Stationary air conditioning, NGD DAF Cool Ultimate top cover stationary aircon NGD paint finish All information without guarantee. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1999, We sell a lot of 2 embroidery machines Tajima : 1 machine 12 heads DC1212 (12 needles) 1 machine 18 heads DC1218 (12 needles) well take cared of. Without frames Ideal for export - 2 machines fit one container (We offer loading) Kfsdpex Edzyefx Affea Prix for the 2 : 12000€

Condition: excellent (used), Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: M004397 M003639, type of input current: three-phase, total width: 2,770 mm, total length: 25,000 mm, For sale: a complete cutting room line with Morgan Tecnica spreading machine, purchased in 09/2022. The machinery is fully operational and ready for immediate use. It has been serviced by the manufacturer, Morgan Tecnica. The total working time of the cutter amounts to approximately 4,500 hours. The Next 2 Δ ES is a multi-layer cutting machine by MorganTecnica, designed to provide maximum reliability in terms of durability and performance for fabric cutting in mass production environments. The machine integrates several mechanical enhancements to reinforce its cutting head. Next 2 Δ ES technology ensures the highest quality of cut combined with maximum productivity, low operating costs, and a fast return on investment. Specifications of the Next 2 Δ 80 ES Cutter: - Maximum cutting thickness: 8 cm (compressed) - Maximum cutting speed: 65 m/min - Maximum cutting acceleration: 6 m/s² - Maximum positioning speed: 120 m/min - Maximum positioning acceleration: 10 m/s² - Effective cutting window length: 170 cm Kjdpfox Ebkxex Affsfa - Effective cutting window width: 180 to 220 cm - Average energy consumption:

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Kedpfx Afox D Uydjfjfa Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: every machine comes with a bundle of binding wire (120 wires). Need more binding wire bundles? Request a free quote. At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond promptly, and ensure you quickly have access to the right machine. You are welcome to inspect the machines at our location: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to properly inform you and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Condition: as good as new (ex-display), Durkopp adler -3-TRANSPORT -1 NEEDLE WITH TRIM-KNIFE Ksdpshc Nbfjfx Affofa -THREAD TRIMMER

Condition: like new (used), Year of construction: 2021, operating hours: 2 h, functionality: fully functional, machine/vehicle number: aggregat-nr.:%20BID-021297, travel distance X-axis: 120 mm, Benz Saw aggregate for homag cnc centre Kjdpfx Aex Dzfmeffjfa nmaxout (T6) = 15.000 min/-1 amax (T4) = 120 1/s2 000WD042073222 Aggregat-Nr.: BID-021297 か 0,349 C2: 173,63 G6: 66,844 132,608 птакс. (16) = 15.000 mln/-1 amar (74)= 120 1/52 Very hardly used

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function Kodpfoif Ek Rsx Affjfa • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2006, color: yellow, overall weight: 16,000 kg, maximum load weight: 12,840 kg, empty load weight: 3,160 kg, loading space volume: 46 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,560 mm, first registration: 06/2006, fuel type: diesel, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68116 Krone, Swap Body / Container * Year of manufacture: 2006 * 7.45 m * Fixed roof * Load securing certificate: DIN EN 12642 Code XL * Roller shutter door * Textile construction * Suitable for rail loading / craneable * Other, miscellaneous * Gross vehicle weight: 16,000 kg * Tare weight: 3,160 kg * Payload: 12,840 kg * Permitted gross weight: 16,000 kg * Internal dimensions: L=7,300 mm, W=2,480 mm, H=2,560 mm * Internal volume*: 46 m³ * Corner fitting dimensions: E=5,853 mm * Overhang: 799 mm * Coupling height: 1,320 mm * Pallet spaces: 18 * Krone Swap Body 745 * Smooth side walls * Roller shutter door Disclaimer: Kjdpjvavm Uefx Affsfa Subject to change, prior sale, and errors excepted. Further photos and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV approval, registration service * Vehicle transfer Please contact our trained staff—we are happy to advise you.

Condition: like new (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, total height: 2,120 mm, installation height: 2,120 mm, total width: 1,000 mm, throat depth: 695 mm, operating speed: 12 mm/s, overall weight: 1,200 kg, reverse speed: 9 mm/s, pressure: 12 bar, Hydraulic press Profi Press automatic 60 Tonnes single phase hardly used Technical specifications Pressure force [kN]: 600 Maximum pressure [bar]: 259 Piston stroke [mm]: 380 Oil capacity [dm³]: 38 Working speed [mm/sec]: 2,87 Approaching speed [mm/sec]: 9,5 Return speed [mm/sec]: 12 Motor power [kW]: 2.2 Voltage [V]: 400/3 Frequency [Hz]: 50/60 Working width [mm]: 750 Weight [kg]: 540 Diameters Inside diameter of cylinder [mm]: 170 Diameter of piston rod [mm]: 75 Diameter of piston head [mm]: 100 COLLECTION ONLY FROM MANCHESTER Payment on collection No Vat . Features of this workshop press (60 ton M/H-2) Integrated pressure manometer Pressure regulation Hydraulic unit with a 2-speeds handle In height adjustable working table Joystick for the control of the piston Hand pump for precision pressing Optional accessories Movable cylinder Foot pedal, two-hands operation or hand remote controller V-block set for extra support Mandrel set / Pressure pins Digital stroke read-out Table plate / pressing table Protection screens (customisable) Dimensions in mm Kfodpfox Dzfaox Affoa A: 2120 B: 1000 C: 695 D: 750 E: 260 F: 1315 G: 150 H: 197 I: 750 J: 805 K: 200 NO VAT ! , no vat added.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Kodpfx Asfnlkwoffjfa Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2013, color: yellow, overall weight: 16,000 kg, maximum load weight: 12,180 kg, empty load weight: 3,820 kg, loading space volume: 50 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,800 mm, first registration: 06/2013, axle configuration: 2 axles, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68285 Krone, Swap Body / Container * Year of manufacture: 2013 * 7.82 m * Fixed roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 compliance * Portal doors * Textile version * Complete double-deck including support beams * Telescopic landing legs * Suitable for rail transport – crane-liftable * Other * Gross weight: 16,000 kg * Tare weight: 3,820 kg * Payload: 12,180 kg * Permissible gross weight: 16,000 kg * Internal dimensions: L=7,300 mm, W=2,480 mm, H=2,800 mm * Internal volume*: 51 m³ * Corner fitting dimensions E=5,853 mm * Overhang dimension 983 mm * Parking height: 1,120 mm * Pallet spaces: 18 * MANUFACTURER: KEREX * Container upper corner castings Disclaimer: Kfodpfevglfmex Affja Specifications subject to change, prior sale, and errors excepted. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists, we are happy to advise you.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: Kfedjwgc I Ropfx Affsa • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Ksdpfsfhgvwjx Affefa Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.