Used Spiral Mixer With Removable Bowl for sale (6,667)

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner Rbjdpfx Aju Smq Sjhzjt - log infeed conveyor

Condition: used, Diameter: 900 mm Redsh Eyghopfx Ahzobt

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Rbedpfx Ahsuzv Tzjzst Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Roller conveyor with chain cross conveyor Rjdpfoi Sdk Sox Ahzobt Can be used after resaw. - Electric motor: 1,1 kW - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Condition: new, Year of construction: 2025, Vacuum mixer is designed for mixing crushed meat. Due to the freqency regulator to achieve speed control. The microprocessor control is by German company ADITEC. The working part is with spiral shape and paddles. TECHNICAL DETAILS: Redpfowq D Rbjx Ahzjbt MODEL BM 300 Working volume 300 L/ 220 kg Instaled Power 3 kW Shafts speed frequency regulator Kind of shafts paddle Unload front valve Power 380 V 50 Hz Air power 6 bar L x B x H 1310 x 920 x 1500 mm.

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Redpfx Ahjq T N T Tszebt Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Rsdpfxoun Nvbs Ahzsbt

Condition: ready for operation (used), Asahi - Seiki Manufacturing Co. Ltd. NSF-10 for producing extension / extended springs with english or german loops for wire diameters up to 1mm. Machine in very good condition, possible to buy with decoiler and setted for some springs. Rbjdpsr Izikefx Ahzot

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid Rbjdpfx Aowwkk Ishzet In good working order

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400mm Rjdpehvmi Tefx Ahzsbt Length: 990mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Rbedpfx Ahoya Dy Hezet Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Coolant filtration system Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units

Condition: good (used), Nice Formax F19 former with touchscreen controls. Well maintained machine direct from European burger factory. With Tenderform Rbsdeqaz R Uspfx Ahzet

Condition: good (used), JBT Stein TM3 batter mixer. Direct from closed fried food factory, this machine was used for making tempura batter for a line producing chicken burgers for McD. 2002 machine but the factory closed down in 2016. Rbjdeu Iay Sspfx Ahzjt

Condition: used, all stainless steel loading height : ± 1.000 mm Rbodpfxsyf D Rcs Ahzjt diameter of the screw : ± 350 mm outfeed height ± 1.600 mm length of the screw : ± 3.100 mm dimensions hopper: ± 900 x 800 mm dimensions: (l x w x h): ± 3.200 x 900 x 2.300 mm mobile with bridge breaker (=extra screw)

Condition: used, Volume: 700L Usable volume: 80-500L Redpfsyf D E Tjx Ahzsbt Internal diameter: 1100 mm Suitable for vacuum: -1 bar Double jacket: pressure proof + 3 bar Capacity: 18,5 kW with frequency converter Nominal speed: approx. 3000 rpm (with 50Hz) Protection: IP 54 suitable for heating and cooling Stainless steel 316L + Homogeniser

Condition: used, Year of construction: 2007, operating hours: 13,500 h, CE mark: yes Serial number: 7xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22286 Specifications:• Model year: 2007• Total hours: approx. 13,500• New engine installed in 2023, approx. 1,600 hours• Output: 310 kW• Weight: approx. 33,500 kg• Cone replaced in 2023• New bearings and rollers in conveyor• New hydraulic motor• Feed hopper• CAT engine Description:Metso LT200HP cone crusher with large feed hopper.A new engine was installed in 2023. Turbo and injectors are not completely new but have been overhauled.The machine operates as it should and is ready for work.Available for delivery at short notice.See video. Rbodpfx Ahjyfz Dmozjt Hours: 13500 Own weight: 33500 CE: Yes Engine hours: 1600 Model: 2007 Metso LT200HP konknuser med matelomme (byttet motor)

Condition: used, machine/vehicle number: YV2A8A2DX4A58xxxx, mileage: 604,000 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 22284 Specifications:• EU-approved until 20.05.2026• Model year: 2004• Mileage: approx. 604,000 km• Manual transmission• Suspension: steel front and air rear• New tyres on 4th axle• New turbo• Steering on 4th axle• Snow plough preparation (plough not included)• Joab hook with articulation• Length: approx. 865 cm• Width: approx. 255 cm• Wheelbase: 340 / 137 cm• Unladen weight: approx. 14,470 kg• Tridem• Engine output: 611 hp• 2 rotating beacons• Tool box• Sleeping berth• Radio/CD• Climate control / A/C Rjdpjyfzz Eofx Ahzobt Description:Snow-prepared Volvo FH16 hook loader from 2004.Equipped with a Joab hook with articulation and steering rear axle.EU-approved until May 2026 and ready for operation.Available for delivery at short notice.See video. Km: 604000 HK: 610 Technical approved: Yes EU-approved until: 20.05.2026 Own weight: 14470 Total Weight: 38000 Payload: 23455 Width: 255 Length: 865 Euro: 3 Model: 2004 Volvo Fh16 Tridem Krokbil m/ Joab krok med knekk Gearbox: Manual

Condition: used, Year of construction: 2015, operating hours: 8,873 h, Drive: Wheel CE mark: yes Serial number: hcmlba5ze00030xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22281 Specifications: 2015 model 8873 hours 122 kW Weight: 19360 kg Tires (see pictures) Blade Service history Tow hitch Trailer setup Central lubrication Hammer hydraulics Digging bucket Grading bucket Rototilt 2 chains Climate/AC Lights Radio Ready for delivery Description: Rsdpeyfz Hhofx Ahzobt We have a 2015 Hitachi ZX170W-5B wheeled machine for sale, equipped with 2 chains, a grading bucket, a digging bucket, and a rototilt. The machine has been well maintained and taken care of by the owner. However, faults and deficiencies may occur since it is from 2015. A trailer can be included for an additional cost if desired. Ready for delivery. Hours: 8873 Own weight: 19360 Kw: 122 CE: Yes Model: ZX170W-5B hjulmaskin m/ 2 stk kjettinger, pusseskuffe,graveskuffe og rototilt

Condition: used, machine/vehicle number: 01xxxx, Year of construction: 2019, operating hours: 3,668 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 22280 Specifications: 2019 model Weight: 16900 kg 3668 hours (will increase slightly) 12159 km 6x6 296 hp 218 kW 30 km/h Maximum total weight: 36500 kg Articulated steering Locking differential Rbedjyfz D Tjpfx Ahzjt Maintenance performed continuously Tires (see pictures) Climate control/Air conditioning Radio Lights Heated mirrors Ready for delivery Description: We have a 2019 Hydrema 922F-2.55 dumper with white plates and low hours for sale. Everything works as it should, and all maintenance has been performed continuously by the owner. A versatile dumper that can be used for most tasks. The dumper is ready for delivery. HK: 296 Hours: 3668 Own weight: 16600 CE: Yes Model: 922F-2.55 dumper m/ hvite skilter og lite timer

Condition: used, Mixing: 1 planetary paddle, 1 bottom scraper, 1 side scraper Possibility of integrating a lateral rotor/stator agitator (this request may be subject to an additional quotation). Side scraper and its support not available (this request may be subject to an additional quotation). Vessel : Material : stainless steel Total volume : 400 L Maximum pressure: 0.4 bar Tilting: yes Rbjdpfx Ajyfw Injhzst Spray nozzle circuit Jacketed : Capacity : 30 L Maximum pressure: 6 bar   Electrical cabinet Machine dimension : 140 x 165 x 240 cm Videos available on request

Condition: new, new ! all stainless steel variable speed microcontroller 2 mixing directions Rjdpfx Aheyfny Iszobt pneumatic lid inspection gantry safety lid 11kW CE-approved Suitable for loader with “Easy Connect” Easy clean overall dimensions (l x w x h) : 2.180 x 1.000 x 1.600 mm + Loader for eurobins

Condition: new, new ! all stainless steel Redpfoyfnyhox Ahzebt 2 speeds (20 and 40 rpm) 2 mixing directions 3,3 / 4,4 kw inspection gantry safety lid CE-approved Suitable for loader with “Easy Connect” overall dimensions (l x w x h) : 1.750 x 950 x 1.650 mm (open lid: H: 2.100 mm) infeed height : ± 1.350 mm dimensions drum : (l x w x h) : ± 860 x 670 x 565 mm + Loader for eurobins

Condition: used, Type ICS/C 1.6-838-2x8/115 Model: North - West spiral belt with 2 x 8 tiers nett belt width ± 830 mm product height: max. ± 150 mm Capacity: ± 1.000 kg/hr at 90min Siemens control Belt washing and drying system Rodpfeyfnxqox Ahzsbt Additional in- and out-feed conveyor belts: 2-track Dimensions (l x w x h) : ± 10.300 x 4.660 x 2.780 mm yoc 2011 3 x 400V, 50 Hz, 160A

Condition: new, new ! Rjdpeyfnw Hsfx Ahzjbt all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 3,7 / 4,5 kW inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 1.970 x 1.000 x 1.750 mm (open lid: H: 2.250 mm) infeed height : ± 1.450 mm Suitable for loader with “Easy Connect” dimensions drum : (l x w x h) : ± 1.000 x 765 x 665 mm + Loader for eurobins

Condition: used, machine/vehicle number: YV2RT60D3KA84xxxx, mileage: 187,500 km, Year of construction: 2020, Please contact ATS Norway for more information Rjdpfeyfl Ddsx Ahzobt Please provide reference number upon request: 22270 Specifications: 2020 model 187,438 km EU approved until: 14.02.26 Euro 6 engine 6x4 551 hp I-shift Tires (see pictures) New tires on the drive axle Suspension: air suspension Hydraulic cover Climate/AC Radio Heated mirrors Diesel heater Video Ready for delivery by agreement Trailer Specifications: 2017 model EU approved until 05.04.26 Tires (see pictures) Air-controlled cover Lifting on the 1st and 3rd axles Delivery by agreement Description: We have a 2020 Volvo FH 540 6x4 asphalt truck with a 2017 Nor Slep FHV-24T 3-axle asphalt trailer for sale. Both the truck and the trailer will be EU approved before sale. All services have been carried out continuously at the workshop. Everything works as it should. Some error codes in the display (see pictures) will also be resolved before sale. The set can be split if desired. Delivery by agreement. Km: 187500 HK: 550 Technical approved: Yes EU-approved until: 14.02.2026 Own weight: 12800 Total Weight: 30000 Payload: 17125 Width: 255 Length: 780 Kw: 405 Euro: 6 Model: FH540 6x4 asfaltbil m/ 2017 Nor Slep fhv-24t 3 akslet asfaltkjerre Gearbox: Automatic