Used Show Mature Felgen for sale (1,241)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm Bsdpfeyaqgyex Aafolc - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm Bljdpfx Aasyaqczsfec - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: used, With this offer, you are purchasing a used ‘Selecta Victoria’ vending machine. Item for sale: 1 x Selecta Victoria with the following features: Blsdpfxsyam Awj Aafsc Includes cooling system Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order. Packaging and shipping: You are welcome to view the machine during our business hours. Please make an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, With this offer, you are purchasing a used flow cytometer ‘Beckman Coulter DxFLEX System B5-R0-V0’. Item for sale: 1 x Beckman Coulter DxFLEX System B5-R0-V0 with the following equipment: Bedpfxoxl Tv Ho Aafolc Manufacturer tested Includes laptop for use Condition: This offer is for a used device, which may show signs of wear. The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, With this offer, you are purchasing a used ‘Sielaff SÜ 2020’ vending machine. Item for sale: Blsdoyamzgjpfx Aafoc 1 x Sielaff / Selecta SÜ 2020 with the following features: 5 selection levels Includes coin slot Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Konica Minolta SD-506 WY3’ brochure finisher. Item for sale: 1 x Konica Minolta SD-506 with the following features: Product specification: WY3 Not the right equipment? We have additional accessories and machines in stock. Feel free to contact us! Condition: Bodpfx Aoyamx Esafslc This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the Konica Minolta Bizhub PRESS 2250P. Item for sale: 1 x Konica Minolta Bizhub PRESS 2250P with the following equipment: Includes 2x paper decks Includes LS-505 stacker Blodpoyamw Uefx Aafec Not the right equipment for you? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 34,784,268 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: like new (used), functionality: fully functional, With this offer, you are purchasing a mint condition A3 colour system ‘Konica Minolta Bizhub C451i’. Item for sale: 1 x Minolta Bizhub C451i with the following features: Includes 2-compartment cassette cabinet Not the right configuration? No problem, we can configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 7 pages Bledpfeyamwzjx Aafec Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Keyence VL-700 optical coordinate measuring machine. Item for sale: 1 x Keyence VL-700 with the following equipment: Includes laptop with application software Includes calibration plate Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Bedpfxjyamwno Aafolc Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: ready for operation (used), Year of construction: 2008, A CNC woodworking center Homag is available. Travel path X/Y/Z: 4000mm(4200mm)/1235mm/182mm, machine dimensions X/Y/Z: approx. 8000mm/5500mm/2950mm, operating hours: approx. 33226h. The machine is impact-sensitive at the terminal, and the laser shows problems with stone detection. Including spare operating equipment, chiller as well as various clamps and suction units. Documentation available. An on-site inspection is possible. Bledpfsyddz Ssx Aafec

Condition: like new (used), Year of construction: 2002, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 2002, fully overhauled (technically and optically), for profile widths 6-24 mm, 2 butyl storage cylinder for x 7,5 kg butyl. The machine will be available by the late in February / early in March 2026. Bsdpfx Aasydc Nnsfelc Please note: the photos show the same type extruder after our last overhaul.

Condition: used, Year of construction: 2009, operating hours: 7,892 h, load capacity: 3,000 kg, lifting height: 3,720 mm, fuel type: electric, construction height: 2,650 mm, gearing type: automatic, Equipment: cabin, head guard, Counterbalance forklift, fully enclosed cab with heater, electronic weighing system, work lights, side shift. ----As viewed or offered, without additional services or accessories. Our offer does not include a new technical inspection (TÜV) as standard. If a new TÜV inspection is required, we are happy to provide you with an offer from one of our partner workshops! The vehicle may be provided with decals and/or company signage. Our general conditions of delivery and payment apply. We assist you with export procedures, preparation of export documents, procurement of registration plates, supplier's declaration, etc.! The information provided in advertisements, on the internet, price tags, and pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed features are subject to separate verification. We expressly reserve the right to prior sale, as this item is also offered on other platforms. Information regarding accessories is provided without guarantee. Subject to changes, prior sale, or errors. We strongly recommend and offer an on-site inspection and inspection to ensure there is no misunderstanding regarding condition or suitability. Vehicle and tarpaulin may show company branding, and images may have been edited. Blsdpfx Aox Nb H Roafoc We sell exclusively according to our general terms and conditions with exclusion of any warranty. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged.

Condition: ready for operation (used), Item: M-8913-APV Cheese Aging Shelves Cheese maturing shelves" or "cheese aging shelves". These terms refer to the specialized shelving used to store cheese while it ages or matures under controlled conditions. Shelves are made of special hard foodgrade material. Dimension: 1900 X 900 X 1700 Bodpfx Aaetmthnjfolc They can be stacked.

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; Blsdpfxevnh T Ns Aafoc With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.321,00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Year of construction: 2020, condition: excellent (used), functionality: fully functional, KAMA ProFold 74 – Folding and Gluing Machine Year of manufacture: 2020 | Only approx. 680 operating hours | Very well-maintained condition For sale is a KAMA ProFold 74 folding and gluing machine from year 2020. The machine is in very well-maintained condition and, with only approx. 680 operating hours, shows exceptionally low usage. Equipment & Highlights • High-performance folding and gluing machine for cartonboard and corrugated board • Very low wear thanks to minimal operating hours • Comprehensive accessory package, including: o Dispenser unit for self-adhesive tape o Tipper fold module for producing carton pockets, e.g., CD sleeves, folders, and similar packaging Bodpfoyc Hgzsx Aafelc • Precise and robust machine mechanics • User-friendly touch panel control • CE compliant, Made in Germany Technical Specifications (excerpt) • Machine type: KAMA ProFold 74 • Year of manufacture: 2020 • Operating hours: approx. 680 h • Connected load: 4.5 kW • Power supply: 400 V / 50–60 Hz / 3-phase • Control voltage: 24 V DC Applications • Folding cartons • Carton and folder solutions • Pockets, envelopes, and special packaging • High-precision short and medium production runs Conclusion This KAMA ProFold 74 is ideal for companies seeking a high-quality, flexible, and almost as-new folding and gluing machine. Thanks to its excellent condition and extensive accessories, it offers outstanding value for money.

Year of construction: 2025, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. Bljdpfx Aeyaarfsafjc In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Bljdpfoxnlgcex Aafoc Storage location: Garbsen

Condition: used, Electric Forklift Truck OM PIMESPO Type XE 25 ac Counterbalance forklift, electric forklift, compact forklift Serial No. SES23X9-10 – Manufacturer No. F14024W00609 Year of manufacture 2008 Rated capacity 2500 kg Capacity at 500 mm load centre 2500 kg Lift height 4340 mm Overall height 2220 mm (container compatible) Mast height 2220 mm Free lift 1600 mm Blodst Ac Erspfx Aafsc Fork length 1150 mm Fork width 100 mm Fork thickness 40 mm (actual 38 mm - at heel 35 mm) Fork carriage width 1030 mm Operating voltage 80 Volt - 4-wheel, superelastic, solid rubber tires front 23x9-10 / rear 18x7-8 - Hydraulic power steering - Triplex free lift mast - Sideshift - Overhead guard - Drive battery HAWKER, 80 Volt, 560 Ah, year of manufacture 12/2022, supplied with automatic charger - Operating hours counter shows 2969 hours - New UVV safety inspection by TÜV (additional cost 150,-- EUR net) Length without forks 2400 mm Overall width 1190 mm Own weight with battery 4800 kg Good condition

Condition: used, Year of construction: 1970, plate thickness max. 1,5 mm sheet width max. 1.020 mm Year ca. 1970 manual ja ja ja +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Bsdsx U Dakepfx Aafjlc Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2000, condition gut sold only together as package ja Bsdpfx Ajx U A Uaoafjlc +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2000, control FIDIA PCN 775 . x-travel 1000 mm y-travel 620 mm z-travel 700 mm Axis 5 Achsen simultan gesteuert weight 12 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Blsdpfex U A S Sjx Aafsc Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2009, 2009 current intensivity 300 A wire dia. 1 mm sofort einsatzbereit 239836 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Blodpfx Asx U A Rusafec +++++

Condition: used, Dust suction hood x mm Motor output x kW Air consumption 2000 m³/h +++++ Please note: Bedpfx Aaox U A N Dofelc The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, working area 50 - 75 mm working area 75 - 100 mm working area 200 - 300 mm Blsdpfx Aaex U A Rbjfjc +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1978, Year ca. 1978 für Stangenprofile und... Bodpfx Aajx U A I Tsfjlc ... für Flachmaterial material thickness max. 24 mm working length 300 - 600 mm efective widths 3 mal 170 mm drive motor 400 V, 11 kW, 50 Hz . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++